REFERENCES

1. Li, Y.; Xiao, Z.; Yan, Z.; et al. Polymer substrates for flexible sensors: advances and contributions to smart agriculture. Adv. Funct. Mater. 2026, 36, e77444.

2. Ji, J.; Liu, N.; Tian, Y.; et al. Transparent polyurethane coating with synergistically enhanced antibacterial mechanism composed of low surface free energy and biocide. Chem. Eng. J. 2022, 445, 136716.

3. Shen, N.; Cheng, E.; Whitley, J. W.; et al. Photograftable zwitterionic coatings prevent Staphylococcus aureus and Staphylococcus epidermidis adhesion to PDMS surfaces. ACS. Appl. Bio. Mater. 2021, 4, 1283-93.

4. He, B.; Du, Y.; Wang, B.; et al. Self-healing polydimethylsiloxane antifouling coatings based on zwitterionic polyethylenimine-functionalized gallium nanodroplets. Chem. Eng. J. 2022, 427, 131019.

5. Dai, W.; Sun, J.; Gao, Y.; et al. Substrate selection in antifouling and antimicrobial performances of nanomaterial coatings: a comparison of PDMS, PMMA, and glass. ACS. Appl. Nano. Mater. 2025, 8, 9781-91.

6. Oliveira, I. M.; Gomes, M.; Gomes, L. C.; Pereira, M. F. R.; Soares, O. S. G. P.; Mergulhão, F. J. Performance of graphene/polydimethylsiloxane surfaces against S. aureus and P. aeruginosa single- and dual-species biofilms. Nanomaterials 2022, 12, 355.

7. Huang, L.; Xu, S.; Wang, Z.; et al. Self-reporting and photothermally enhanced rapid bacterial killing on a laser-induced graphene mask. ACS. Nano. 2020, 14, 12045-53.

8. Misra, U.; Jashrapuria, K.; Chouhan, Y.; Kumar, A.; Singh, S. P. Fabrication of electroconductive PVDF membranes: hierarchical architectures for synergistic biofouling suppression and electrochemical regeneration. ACS. Appl. Mater. Interfaces. 2026, 18, 18356-67.

9. Zaccagnini, P.; Ballin, C.; Fontana, M.; et al. Laser‐induced graphenization of PDMS as flexible electrode for microsupercapacitors. Adv. Mater. Interfaces. 2021, 8, 2101046.

10. Li, Z.; Song, Y.; Shao, W.; et al. High-fidelity phase-change transfer platform for laser-induced graphene toward multifunctional flexible electronics. Chem. Eng. J. 2026, 544, 179177.

11. Hayashi, S.; Terakawa, M. Direct writing of fluorescent semiconducting nanoparticles on polydimethylsiloxane by ultrashort-pulsed laser processing: implications for electronic and photonic device fabrication. ACS. Appl. Nano. Mater. 2023, 6, 2125-32.

12. Hayashi, S.; Morosawa, F.; Terakawa, M. Synthesis of silicon carbide nanocrystals and multilayer graphitic carbon by femtosecond laser irradiation of polydimethylsiloxane. Nanoscale. Adv. 2020, 2, 1886-93.

13. Wang, W.; Liu, Y.; Liu, Y.; et al. Direct laser writing of superhydrophobic PDMS elastomers for controllable manipulation via marangoni effect. Adv. Funct. Mater. 2017, 27, 1702946.

14. Zhang, J.; Ren, C.; Liu, L.; Li, Z.; Zhao, H.; Jin, H. Ultrafast laser direct writing superhydrophobic/superoleophilic microfluidic chips for uniform water-in-oil droplet generation. Opt. Laser. Technol. 2026, 195, 114589.

15. Zhang, W.; Yan, W.; Zheng, H.; Zhao, C.; Liu, D. Laser-engineered superhydrophobic polydimethylsiloxane for highly efficient water manipulation. ACS. Appl. Mater. Interfaces. 2021, 13, 48163-70.

16. Gao, R.; Guan, Z.; Yu, Y.; et al. Femtosecond laser-aided fabrication of graphitic carbon based micro-nano hierarchical interfaces for SERS detection on microfluidic sensor. Sens. Actuators. B. Chem. 2026, 466, 140238.

17. Nair, V.; Yi, J.; Isheim, D.; et al. Laser writing of nitrogen-doped silicon carbide for biological modulation. Sci. Adv. 2020, 6, eaaz2743.

18. Zhao, L.; Peng, Y.; Dou, P.; Li, Y.; He, T.; Ran, F. Surface chemistry of electrode materials toward improving electrolyte‐wettability: a method review. InfoMat 2024, 6, e12597.

19. Shao, Y.; Starikova, T.; Xi, M.; et al. Sensitive and spatially‐resolved electrochemiluminescence via micropatterning. Adv. Mater. Interfaces. 2026, 13, e70560.

20. Cao, H.; Habimana, O.; Safari, A.; Heffernan, R.; Dai, Y.; Casey, E. Revealing region-specific biofilm viscoelastic properties by means of a micro-rheological approach. NPJ. Biofilms. Microbiomes. 2016, 2, 5.

21. Zhang, Q.; Wang, Y.; Zhang, H.; Lei, J. High‐stability flexible patterned perovskite optoelectronic structures fabricated by a laser pyrolysis assisted process. Adv. Mater. Technol. 2023, 8, 2300741.

22. Chyan, Y.; Ye, R.; Li, Y.; Singh, S. P.; Arnusch, C. J.; Tour, J. M. Laser-induced graphene by multiple lasing: toward electronics on cloth, paper, and food. ACS. Nano. 2018, 12, 2176-83.

23. Liu, S.; Zeng, T. H.; Hofmann, M.; et al. Antibacterial activity of graphite, graphite oxide, graphene oxide, and reduced graphene oxide: membrane and oxidative stress. ACS. Nano. 2011, 5, 6971-80.

24. Xu, X.; Cao, D.; Wei, Y.; et al. Impact of graphitization degree on the electrochemical and thermal properties of coal. ACS. Omega. 2024, 9, 2443-56.

25. Wang, H.; Kong, J.; Xu, M.; et al. Laser ablation behavior of SiO2-Nd2O3/Si-SiC-MoSi2 coated C/C composites repaired by laser cladding. Corros. Sci. 2022, 198, 110132.

26. Harada, D.; Tunmee, S.; Euaruksakul, C.; et al. Investigation of the structure and tribological properties of laser-irradiated hydrogenated amorphous carbon films. Diamond. Relat. Mater. 2023, 131, 109573.

27. Kuo, C.; Faber, K. Permeable carbon nanotube-reinforced silicon oxycarbide via freeze casting with enhanced mechanical stability. J. Eur. Ceram. Soc. 2020, 40, 2470-9.

28. Kumar S, R.; Prasad, R. M. Yttrium-modified polymer-derived SiOC ceramics with enhanced high-temperature thermal stability. Ceram. Int. 2026, 52, 5567-76.

29. Wang, X.; Qian, J.; He, C.; Shui, A.; Du, B. The structural evolutions and enhanced thermal stability of Al cation-modified silicon oxycarbide ceramics. J. Sol. Gel. Sci. Technol. 2023, 106, 616-25.

30. Feng, X.; Chen, H.; Zhang, J.; et al. Constructing a conductive nest to improve the electrochemical properties of SiOC anodes through CNT additives. J. Electron. Mater. 2024, 53, 1074-82.

31. Luo, Y.; Li, L.; Su, Z.; et al. High-strength and superior thermal insulating SiOC ceramic aerogels derived from thermostable silicone aerogels. Ceram. Int. 2025, 51, 53181-91.

32. Du, B.; Hong, C.; Wang, A.; et al. Preparation and structural evolution of SiOC preceramic aerogel during high-temperature treatment. Ceram. Int. 2018, 44, 563-70.

33. Scharin‐Mehlmann, M.; Saarmann, S.; Gobert, C.; Köhler, R.; Berwian, P. Passivated SiC surfaces for photonic and quantum applications: balancing chemical stability and surface luminescence. Adv. Mater. Interfaces. 2026, 13, e70525.

34. David, L.; Bhandavat, R.; Barrera, U.; Singh, G. Silicon oxycarbide glass-graphene composite paper electrode for long-cycle lithium-ion batteries. Nat. Commun. 2016, 7, 10998.

35. Shin, J.; Ko, J.; Jeong, S.; et al. Monolithic digital patterning of polydimethylsiloxane with successive laser pyrolysis. Nat. Mater. 2021, 20, 100-7.

36. Thakur, A. K.; Singh, S. P.; Thamaraiselvan, C.; Kleinberg, M. N.; Arnusch, C. J. Graphene oxide on laser-induced graphene filters for antifouling, electrically conductive ultrafiltration membranes. J. Membr. Sci. 2019, 591, 117322.

37. Ashok, D.; Cheeseman, S.; Wang, Y.; et al. Superhydrophobic surfaces to combat bacterial surface colonization. Adv. Mater. Interfaces. 2023, 10, 2300324.

38. Ellinas, K.; Kefallinou, D.; Stamatakis, K.; Gogolides, E.; Tserepi, A. Is there a threshold in the antibacterial action of superhydrophobic surfaces? ACS. Appl. Mater. Interfaces. 2017, 9, 39781-9.

39. Seo, H.; Ko, G. J.; Song, S.; et al. Topographical patterning of cell-repellent interfaces for immune-stealth implantable electronics via multiphoton ablation lithography. Adv. Sci. 2025, 12, e06482.

40. Vakifahmetoglu, C.; Zeydanli, D.; Ozalp, V. C.; Borsa, B. A.; Soraru, G. D. Hierarchically porous polymer derived ceramics: a promising platform for multidrug delivery systems. Mater. Design. 2018, 140, 37-44.

41. Chen, H.; Yu, S.; Li, Y. Bioactivity of SiOC and SiCaMgOC coatings prepared by sol-gel method. Ceram. Int. 2023, 49, 34248-54.

42. Rauchenwald, K.; Shirvani, R.; Edtmaier, T.; Steiger, M.; Konegger, T. Freeze-cast SiOC ceramics supporting the growth of industrially relevant microorganisms. PLoS. One. 2025, 20, e0325311.

43. Niu, M.; Jayanthi, K.; Gao, H.; et al. Structural and thermodynamic evolution of an amorphous SiOC ceramic after swift heavy ion irradiation. Acta. Mater. 2023, 242, 118475.

44. Jang, J.; Warriam Sasikumar, P. V.; Navaee, F.; Hagelüken, L.; Blugan, G.; Brugger, J. Electrochemical performance of polymer-derived SiOC and SiTiOC ceramic electrodes for artificial cardiac pacemaker applications. Ceram. Int. 2021, 47, 7593-601.

45. Ma, M.; Wang, H.; Li, X.; Peng, K.; Xiong, L.; Du, X. Free-standing SiOC/nitrogen-doped carbon fibers with highly capacitive Li storage. J. Eur. Ceram. Soc. 2020, 40, 5238-46.

46. Amato, L.; Schulte, L.; Heiskanen, A.; Keller, S. S.; Ndoni, S.; Emnéus, J. Novel nanostructured electrodes obtained by pyrolysis of composite polymeric materials. Electroanalysis 2015, 27, 1544-9.

47. Ricohermoso, E.; Solano-Arana, S.; Fasel, C.; Riedel, R.; Ionescu, E. SiOC-based strain gauge with ultrahigh piezoresistivity at high temperatures. ACS. Appl. Eng. Mater. 2023, 1, 1093-105.

48. Tan, J.; Du, J.; Lv, D.; et al. Orbital electrowetting: from continuous droplet transport to programmable microfluidics. Adv. Mater. 2026, 38, e73401.

49. Oh, J. M.; Manukyan, G.; Ende, D. V. D.; Mugele, F. Electric-field–driven instabilities on superhydrophobic surfaces. EPL 2011, 93, 56001.

50. Manukyan, G.; Oh, J. M.; van den Ende, D.; Lammertink, R. G.; Mugele, F. Electrical switching of wetting states on superhydrophobic surfaces: a route towards reversible Cassie-to-Wenzel transitions. Phys. Rev. Lett. 2011, 106, 014501.

51. Zhong, X.; Xie, S.; Guo, Z. The challenge of superhydrophobicity: environmentally facilitated cassie-wenzel transitions and structural design. Adv. Sci. 2024, 11, e2305961.

52. Park, J. H.; Song, Z.; Bong, J. H.; et al. Electrochemical one-step immunoassay based on switching peptides and pyrolyzed carbon electrodes. ACS. Sens. 2022, 7, 215-24.

53. Li, X.; Triskova, I.; Trnkova, L. A new experimental approach to understanding microscopic details of the electrode/electrolyte interface. Electrochim. Acta. 2023, 442, 141921.

54. Carvalho, M. S.; Rocha, R. G.; Nascimento, A. B.; et al. Enhanced electrochemical performance of 3D-printed electrodes via blue-laser irradiation and (electro)chemical treatment. Electrochim. Acta. 2024, 506, 144995.

55. Dai, W.; Inumbra, B.; Wong, P. Y.; et al. A dye-assisted paper-based assay to rapidly differentiate the stress of chlorophenols and heavy metals on Enterococcus faecalis and Escherichia coli. Biosensors 2023, 13, 523.

56. Zhu, Z.; Lv, Z.; Wang, L.; et al. A pump-free paper/PDMS hybrid microfluidic chip for bacteria enrichment and fast detection. Talanta 2024, 275, 126155.

57. Jiang, T.; He, X.; Du, X.; et al. Simultaneous detection of Staphylococcus aureus and Escherichia coli in blood by the integrated multifunctional microfluidic SERS chip. Microchem. J. 2025, 213, 113833.

58. Agnihotri, S. N.; Fatsis-Kavalopoulos, N.; Windhager, J.; Tenje, M.; Andersson, D. I. Droplet microfluidics-based detection of rare antibiotic-resistant subpopulations in Escherichia coli from bloodstream infections. Sci. Adv. 2025, 11, eadv4558.

59. Xu, X.; Lin, X.; Wang, L.; Ma, Y.; Sun, T.; Bian, X. A novel dual bacteria-imprinted polymer sensor for highly selective and rapid detection of pathogenic bacteria. Biosensors 2023, 13, 868.

60. Tokonami, S.; Nakadoi, Y.; Takahashi, M.; et al. Label-free and selective bacteria detection using a film with transferred bacterial configuration. Anal. Chem. 2013, 85, 4925-9.

61. Koçak, E.; Ozkul, C.; Bozal‐Palabiyik, B.; Süslü, İ.; Uslu, B. Electrochemical biosensors for rapid diagnosis of bacterial infections: design, targets and applications in clinical setting. Electroanalysis 2023, 35, e202300106.

62. Subjakova, V.; Oravczova, V.; Tatarko, M.; Hianik, T. Advances in electrochemical aptasensors and immunosensors for detection of bacterial pathogens in food. Electrochim. Acta. 2021, 389, 138724.

63. Akhtarian, S.; Kaur Brar, S.; Rezai, P. Electrochemical impedance spectroscopy-based microfluidic biosensor using cell-imprinted polymers for bacteria detection. Biosensors 2024, 14, 445.

64. Zheng, Z.; Zhang, G.; Xu, W.; et al. Organic-inorganic core-shell satellite nanostructures for dual-readout detection of Escherichia coli O157:H7. Anal. Chem. 2026, 98, 10072-82.

65. Saucedo, N. M.; Gao, Y.; Pham, T.; Mulchandani, A. Lectin- and saccharide-functionalized nano-chemiresistor arrays for detection and identification of pathogenic bacteria infection. Biosensors 2018, 8, 63.

66. Patel, R.; Mandal, N.; Pramanick, B. Biosynthesized AgNP modified glassy carbon electrode as a bacteria sensor based on amperometry and impedance-based detection. IEEE. Trans. Nanotechnol. 2024, 23, 257-64.

67. Zhao, L.; Rosati, G.; Piper, A.; et al. Laser reduced graphene oxide electrode for pathogenic Escherichia coli detection. ACS. Appl. Mater. Interfaces. 2023, 15, 9024-33.

68. Heram, A. Y.; Mengesha, E. T.; Mengesha, A. T.; et al. E. coli imprinted CdS/ZnO/Ag2CO3 nanocomposites for rapid, sensitive and selective electrochemical E. Coli sensing. Electrochim. Acta. 2026, 554, 148335.

69. Liu, Y.; Wang, L.; Li, H.; et al. Rigorous recognition mode analysis of molecularly imprinted polymers - rational design, challenges, and opportunities. Prog. Polym. Sci. 2024, 150, 101790.

Soft Science
ISSN 2769-5441 (Online)

Portico

All published articles are preserved here permanently:

https://www.portico.org/publishers/oae/

Portico

All published articles are preserved here permanently:

https://www.portico.org/publishers/oae/