REFERENCES
1. Walther, A. Viewpoint: from responsive to adaptive and interactive materials and materials systems: a roadmap. Adv. Mater. 2019, 32, 1905111.
3. Liu, Y.; Han, J.; Yan, W.; et al. Degradable epoxy resins derived from α-terpineol: synthesis, characterization and application in thermally conductive adhesives. Polymer 2025, 336, 128955.
4. Miao, W.; Laamari, L. S.; Yu, J.; et al. A shape-adaptive, performance-programmable, self-healable and on-demand destructible robotic skin via self-strengthening dynamic silicone. Adv. Sci. 2025, 13, e08823.
5. Cho, W.; Kang, D. J.; Hahm, M. J.; et al. Multi-functional locomotion of collectively assembled shape-reconfigurable electronics. Nano. Energy. 2023, 118, 108953.
6. Istif, E.; Ali, M.; Ozuaciksoz, E. Y.; Morova, Y.; Beker, L. Near-infrared triggered degradation for transient electronics. ACS. Omega. 2024, 9, 2528-35.
7. Oh, M.; Kim, Y.; Lee, S.; et al. Lifetime-configurable soft robots via photodegradable silicone elastomer composites. Sci. Adv. 2023, 9, eadh9962.
8. Kim, Y. N.; Jeon, W.; Oh, M. H.; Seo, H. J.; Kwon, M. S.; Kang, S. K. UV-triggered cascading degradation of silicone elastomer via self-fluoride amplification. Adv. Sci. 2025, 12, e02056.
9. Byun, S.; Sim, J. Y.; Zhou, Z.; et al. Mechanically transformative electronics, sensors, and implantable devices. Sci. Adv. 2019, 5, eaay0418.
10. Lee, S.; Lee, G.; Kang, I.; et al. Phase-change metal ink with pH-controlled chemical sintering for versatile and scalable fabrication of variable stiffness electronics. Sci. Adv. 2025, 11, eadv4921.
11. Aksoy, B.; Shea, H. Multistable shape programming of variable-stiffness electromagnetic devices. Sci. Adv. 2022, 8, eabk0543.
12. Gao, Y.; Zhang, Y.; Wang, X.; et al. Moisture-triggered physically transient electronics. Sci. Adv. 2017, 3, e1701222.
13. Lee, D.; Rubab, N.; Hyun, I.; et al. Ultrasound-mediated triboelectric nanogenerator for powering on-demand transient electronics. Sci. Adv. 2022, 8, eabl8423.
14. Hinchet, R.; Shea, H. High force density textile electrostatic clutch. Adv. Mater. Technologies. 2019, 5, 1900895.
15. Campbell, G. M.; Roosa, R. D.; Turner, K.; Pikul, J.; Yim, M. Control of silicone-sheathed electrostatic clutches for soft pneumatic actuator position control. In 2024 IEEE 7th International Conference on Soft Robotics (RoboSoft), San Diego, CA, USA, April 14-17, 2024; IEEE, 2024, pp 299-304.
16. Yang, B.; Baines, R.; Shah, D.; et al. Reprogrammable soft actuation and shape-shifting via tensile jamming. Sci. Adv. 2021, 7, eabh2073.
17. Wang, H.; Chen, S.; Zhu, X.; et al. Phase transition science and engineering of gallium-based liquid metal. Matter 2022, 5, 2054-85.
18. Mariani, S.; Cecchini, L.; Pugno, N. M.; Mazzolai, B. An autonomous biodegradable hygroscopic seed-inspired soft robot for visual humidity sensing. Mater. Des. 2023, 235, 112408.
19. Yang, H.; Xu, K.; Xu, C.; et al. Femtosecond laser fabricated elastomeric superhydrophobic surface with stretching-enhanced water repellency. Nanoscale. Res. Lett. 2019, 14, 333.
20. Sadat, M. E.; Kaveh Baghbador, M.; Dunn, A. W.; et al. Photoluminescence and photothermal effect of Fe3O4 nanoparticles for medical imaging and therapy. Appl. Phys. Lett. 2014, 105, 091903.
21. Johnson, R. J. G.; Haas, K. M.; Lear, B. J. Fe3O4 nanoparticles as robust photothermal agents for driving high barrier reactions under ambient conditions. Chem. Commun. 2015, 51, 417-20.
22. Wang, X.; Dai, L.; Jiao, N.; Tung, S.; Liu, L. Superhydrophobic photothermal graphene composites and their functional applications in microrobots swimming at the air/water interface. Chem. Eng. J. 2021, 422, 129394.
23. Gong, J.; Ding, Q.; Shi, Y.; et al. NIR-responsive gold nanomaterials in photothermal antibacterial therapy: from morphological design to multifunctional platforms. Coord. Chem. Rev. 2025, 526, 216348.
24. Haas, K. M.; Lear, B. J. Degradation of polypropylene carbonate through plasmonic heating. Nanoscale 2013, 5, 5247.
25. Liu, X.; Zhao, Z.; Xie, X.; et al. Ultrahigh thermal conductivity and photothermal conversion in interface-optimized bacterial cellulose/boron nitride nanosheets/MXene composites. J. Mater. Sci. Technol. 2026, 248, 87-98.
26. Liu, X.; Lin, F.; Leng, G.; et al. A high thermal conductive composite phase change film for flexible solar/electro-thermal energy conversion. J. Energy. Storage. 2023, 73, 108959.
27. Huang, L.; Ning, J.; Yang, Y.; et al. Thermal-conductive, dynamic cross-linked solid-solid phase change composites toward sustainable energy utilization. Ind. Eng. Chem. Res. 2022, 61, 6448-57.
28. Li, J.; Zhang, W.; Ji, W.; et al. Near infrared photothermal conversion materials: mechanism, preparation, and photothermal cancer therapy applications. J. Mater. Chem. B. 2021, 9, 7909-26.
29. Bellier, M.; Ali, M. E. A.; Abo El Fadl, M. M.; Perreault, F. Photothermal carbon black nanoparticle coating increases scaling resistance in solar membrane distillation. ACS. EST. Water. 2024, 4, 5925-32.
30. Lam, K. Y.; Lee, C. S.; Tan, R. Y. H. NIR-induced photothermal-responsive shape memory polyurethane for versatile smart material applications. RSC. Adv. 2024, 14, 24265-86.
31. Bibinger, J.; Eibl, S.; Gudladt, H.; Schartel, B.; Höfer, P. Pushing the limits of thermal resistance in nanocomposites: a comparative study of carbon black and nanotube modifications. Nanomaterials 2025, 15, 546.
32. Rabbi, K. M.; Saha, S.; Mojumder, S.; Rahman, M.; Saidur, R.; Ibrahim, T. A. Numerical investigation of pure mixed convection in a ferrofluid-filled lid-driven cavity for different heater configurations. Alex. Eng. J. 2016, 55, 127-39.
33. Azimi-juybari, H.; Mohagheghi, M. B. The significance of the synthesis method for graphite-like carbon: effects of acidifying agents on properties and carbon monoxide sensitivity. J. Mater. Sci:. Mater. Electron. 2025, 36, 319.
34. Song, J.; Tian, K.; Ma, L.; Li, W.; Yao, S. The effect of carbon black morphology to the thermal conductivity of natural rubber composites. Int. J. Heat. Mass. Transfer. 2019, 137, 184-91.
35. Rajkumar, N.; Umamahaeswari, D.; Ramachandran, K. Photoacoustics and magnetic studies of Fe3O4 nanoparticles. Int. J. Nanosci. 2011, 09, 243-50.
36. Sailor, M. J. Chemical reactivity and surface chemistry of porous silicon. In Handbook of Porous Silicon; Canham, L., Eds.; Springer International Publishing, 2014; pp 355-80.
37. Isohashi, A.; Bui, P. V.; Toh, D.; et al. Chemical etching of silicon carbide in pure water by using platinum catalyst. Appl. Phys. Lett. 2017, 110, 201601.
38. Son, C. E.; Choi, S. S. Analytical techniques for measurement of crosslink densities of rubber vulcanizates. Elastom. Compos. 2019, 54, 209-19.
39. Fu, S.; Man, Y.; Jia, F. Photothermal effect of superparamagnetic Fe3O4 nanoparticles irradiated by near-infrared laser. J. Nanomater. 2020, 2020, 1-8.
40. Weber, R.; Graf, T.; Berger, P.; et al. Heat accumulation during pulsed laser materials processing. Opt. Express. 2014, 22, 11312.
41. Salmah, H.; Koay, S.; Hakimah, O. Surface modification of coconut shell powder filled polylactic acid biocomposites. J. Thermoplast. Compos. Mater. 2012, 26, 809-19.
42. Yu, Y.; Kong, L.; Li, L.; Li, N.; Yan, P. Antitumor activity of doxorubicin-loaded carbon nanotubes incorporated poly(lactic-co-glycolic acid) electrospun composite nanofibers. Nanoscale. Res. Lett. 2015, 10, 343.
43. Fu, S.; Feng, X.; Lauke, B.; Mai, Y. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Compos. Part. B-Eng. 2008, 39, 933-61.
44. Chattopadhyay, P. K.; Chattopadhyay, S.; Das, N. C.; Bandyopadhyay, P. P. Impact of carbon black substitution with nanoclay on microstructure and tribological properties of ternary elastomeric composites. Mater. Des. 2011, 32, 4696-704.
45. Lozano-Pérez, C.; Cauich-Rodríguez, J.; Avilés, F. Influence of rigid segment and carbon nanotube concentration on the cyclic piezoresistive and hysteretic behavior of multiwall carbon nanotube/segmented polyurethane composites. Compos. Sci. Technol. 2016, 128, 25-32.
46. Lorenz, H., Meier, J., Klüppel, M. Micromechanics of internal friction of filler reinforced elastomers. In Elastomere Friction; Besdo, D., Heimann, B., Klüppel, M., Kröger, M., Wriggers, P., Nackenhorst, U., Eds.; Lecture Notes in Applied and Computational Mechanics, Vol. 51; Springer Berlin Heidelberg, 2010; pp 27-52.
47. Choi, Y. S.; Hsueh, Y.; Koo, J.; et al. Stretchable, dynamic covalent polymers for soft, long-lived bioresorbable electronic stimulators designed to facilitate neuromuscular regeneration. Nat. Commun. 2020, 11, 5990.
48. Han, W. B.; Ko, G.; Lee, K.; et al. Ultra-stretchable and biodegradable elastomers for soft, transient electronics. Nat. Commun. 2023, 14, 2263.
49. Subramanian, M. A.; Manzer, L. E. A “greener” synthetic route for fluoroaromatics via copper (II) fluoride. Science 2002, 297, 1665.
50. Ritala, H.; Kiihamäki, J.; Heikkilä, M. Studies on aluminium corrosion during and after HF vapour treatment. Microelectron. Eng. 2010, 87, 501-4.
51. Kwon, D.; Pham, H. V.; Song, P.; Moon, S. Corrosion behavior of the AZ31 Mg alloy in neutral aqueous solutions containing various anions. Metals 2023, 13, 962.
52. Son, C.; Lim, S. Editors’ choice - control of Si3N4 etching kinetics and selectivity to SiO2 by the additives in superheated water. ECS. J. Solid. State. Sci. Technol. 2019, 8, N85-91.
53. Hartmann, F.; Baumgartner, M.; Kaltenbrunner, M. Becoming sustainable, the new frontier in soft robotics. Adv. Mater. 2020, 33, 2004413.
54. Wiesemüller, F.; Meyer, S.; Hu, Y.; et al. Biopolymer cryogels for transient ecology-drones. Adv. Intell. Syst. 2023, 5, 2300037.
55. Cikalleshi, K.; Nexha, A.; Kister, T.; et al. A printed luminescent flier inspired by plant seeds for eco-friendly physical sensing. Sci. Adv. 2023, 9, eadi8492.
56. Legrand, J.; Terryn, S.; Roels, E.; Vanderborght, B. Reconfigurable, multi-material, voxel-based soft robots. IEEE. Robot. Autom. Lett. 2023, 8, 1255-62.
