REFERENCES

1. Liu D, Wang D, Hong T, et al. Lattice plainification advances highly effective SnSe crystalline thermoelectrics. Science 2023;380:841-6.

2. Wu X, Han Z, Zhu Y, et al. A general design strategy for thermoelectric interface materials in n-type Mg₃Sb_1.5Bi_0.5 single leg used in TEGs. Acta Mater 2022;226:117616.

3. Li Y, Lou Q, Yang J, et al. Exceptionally high power factor Ag₂Se/Se/polypyrrole composite films for flexible thermoelectric generators. Adv Funct Mater 2022;32:2106902.

4. Chen YX, Zhang JZ, Nisar M, et al. Realizing high thermoelectric performance in n-type Bi₂Te₃ based thin films via post-selenization diffusion. J Materiomics 2023;9:618-25.

5. Li L, Liu WD, Liu Q, Chen ZG. Multifunctional wearable thermoelectrics for personal thermal management. Adv Funct Mater 2022;32:2200548.

6. Shi XL, Zou J, Chen ZG. Advanced thermoelectric design: from materials and structures to devices. Chem Rev 2020;120:7399-515.

7. Zhang L, Shi XL, Yang YL, Chen ZG. Flexible thermoelectric materials and devices: from materials to applications. Mater Today 2021;46:62-108.

8. Wang Y, Yang L, Shi XL, et al. Flexible thermoelectric materials and generators: challenges and innovations. Adv Mater 2019;31:1807916.

9. Chi C, Liu G, An M, et al. Reversible bipolar thermopower of ionic thermoelectric polymer composite for cyclic energy generation. Nat Commun 2023;14:306.

10. Hu B, Shi XL, Zou J, Chen ZG. Thermoelectrics for medical applications: progress, challenges, and perspectives. Chem Eng J 2022;437:135268.

11. Ao DW, Liu WD, Zheng ZH, et al. Assembly-free fabrication of high-performance flexible inorganic thin-film thermoelectric device prepared by a thermal diffusion. Adv Energy Mater 2022;12:2202731.

12. Zhang R, Pei J, Han ZJ, Wu Y, Zhao Z, Zhang BP. Optimal performance of Cu_1.8S_1-_xTe_x thermoelectric materials fabricated via high-pressure process at room temperature. J Adv Ceram 2020;9:535-43.

13. Shi X, Chen H, Hao F, et al. Room-temperature ductile inorganic semiconductor. Nat Mater 2018;17:421-6.

14. Hashizume M, Yokouchi T, Nakagawa K, Shiomi Y. Anisotropic magneto-Seebeck effect in the antiferromagnetic semimetal FeGe₂. Phys Rev B 2021;104:115109.

15. Hong M, Zou J, Chen ZG. Thermoelectric GeTe with diverse degrees of freedom having secured superhigh performance. Adv Mater 2019;31:1807071.

16. Deng L, Liu Y, Zhang Y, Wang S, Gao P. Organic thermoelectric materials: niche harvester of thermal energy. Adv Funct Mater 2023;33:2210770.

17. Wu Z, Zhang S, Liu Z, Mu E, Hu Z. Thermoelectric converter: strategies from materials to device application. Nano Energy 2022;91:106692.

18. Wu L, Li H, Chai H, Xu Q, Chen Y, Chen L. Anion-dependent molecular doping and charge transport in ferric salt-doped P3HT for thermoelectric application. ACS Appl Electron Mater 2021;3:1252-9.

19. Li H, Liu Y, Li P, Liu S, Du F, He C. Enhanced thermoelectric performance of carbon nanotubes/polyaniline composites by multiple interface engineering. ACS Appl Mater Interfaces 2021;13:6650-8.

20. Fan Z, Li P, Du D, Ouyang J. Significantly enhanced thermoelectric properties of PEDOT:PSS films through sequential post-treatments with common acids and bases. Adv Energy Mater 2017;7:1602116.

21. Gao Q, Wang W, Lu Y, et al. High power factor Ag/Ag₂Se composite films for flexible thermoelectric generators. ACS Appl Mater Interfaces 2021;13:14327-33.

22. Rongione NA, Li M, Wu H, et al. High-performance solution-processable flexible snse nanosheet films for lower grade waste heat recovery. Adv Elect Mater 2019;5:1800774.

23. Zheng ZH, Zhang DL, Jabar B, et al. Realizing high thermoelectric performance in highly (0l0)-textured flexible Cu₂Se thin film for wearable energy harvesting. Mater Today Phys 2022;24:100659.

24. Ao DW, Liu WD, Chen YX, et al. Novel thermal diffusion temperature engineering leading to high thermoelectric performance in Bi₂Te₃-based flexible thin-films. Adv Sci 2022;9:2103547.

25. Wei M, Shi XL, Zheng ZH, et al. Directional thermal diffusion realizing inorganic Sb₂Te₃/Te hybrid thin films with high thermoelectric performance and flexibility. Adv Funct Mater 2022;32:2207903.

26. Liu H, Li D, Ma C, et al. Van der Waals epitaxial growth of vertically stacked Sb₂Te₃/MoS₂ p-n heterojunctions for high performance optoelectronics. Nano Energy 2019;59:66-74.

27. Ma F, Ao D, Liu X, Liu WD. Ti-doping inducing high-performance flexible p-type Bi_0.5Sb_1.5Te₃-based thin film. Ceram Int 2023;49:18584-91.

28. Shen S, Zhu W, Deng Y, Zhao H, Peng Y, Wang C. Enhancing thermoelectric properties of Sb₂Te₃ flexible thin film through microstructure control and crystal preferential orientation engineering. Appl Surf Sci 2017;414:197-204.

29. Vieira EMF, Figueira J, Pires AL, et al. Enhanced thermoelectric properties of Sb₂Te₃ and Bi₂Te₃ films for flexible thermal sensors. J Alloys Compd 2019;774:1102-16.

30. Shang H, Li T, Luo D, et al. High-performance Ag-modified Bi_0.5Sb_1.5Te₃ films for the flexible thermoelectric generator. ACS Appl Mater Interfaces 2020;12:7358-65.

31. Chang PS, Liao CN. Screen-printed flexible thermoelectric generator with directional heat collection design. J Alloys Compd 2020;836:155471.

32. Zheng ZH, Shi XL, Ao DW, et al. Harvesting waste heat with flexible Bi₂Te₃ thermoelectric thin film. Nat Sustain 2023;6:180-91.

33. Liu WD, Chen ZG, Zou J. Eco-friendly higher manganese silicide thermoelectric materials: progress and future challenges. Adv Energy Mater 2018;8:1800056.

34. Shi J, Chen X, Wang W, Chen H. A new rapid synthesis of thermoelectric Sb₂Te₃ ingots using selective laser melting 3D printing. Mater Sci Semicond Process 2021;123:105551.

35. Yang Q, Yang S, Qiu P, et al. Flexible thermoelectrics based on ductile semiconductors. Science 2022;377:854-8.

36. Hollar C, Lin Z, Kongara M, et al. Flexible thermoelectrics: high-performance flexible bismuth telluride thin film from solution processed colloidal nanoplates (Adv. Mater. Technol. 11/2020). Adv Mater Technol 2020;5:2000600.