REFERENCES
1. Lee J, Babadagli T. Comprehensive review on heavy-oil emulsions: colloid science and practical applications. Chem Eng Sci 2020;228:115962.
3. Czarnecki J, Radoev B, Schramm LL, Slavchev R. On the nature of Athabasca oil sands. Adv Colloid Interface Sci 2005;114-115:53-60.
4. Chopra S, Lines L, Schmitt DR, Batzle M. 1. Heavy-oil reservoirs: their characterization and production. In: Chopra S, Lines LR, Schmitt DR, Batzle ML, editors. Heavy oils. Society of Exploration Geophysicists; 2010. p. 1-69.
5. Lin F, Xu Y. Impact of a novel bitumen extraction process on mined oil sands tailings behavior. AIChE J 2019;65:250-8.
6. Zhou JZ. Role of mineral flotation technology in improving bitumen extraction from mined A thabasca oil sands III. Next generation of water-based oil sands extraction. Can J Chem Eng 2021;99:755-77.
7. Shah A, Fishwick R, Wood J, Leeke G, Rigby S, Greaves M. A review of novel techniques for heavy oil and bitumen extraction and upgrading. Energy Environ Sci 2010;3:700.
8. Leyva-gomez H, Babadagli T. Efficiency of heavy-oil/bitumen recovery from fractured carbonates by hot-solvent injection. J Pet Sci Eng 2018;165:752-64.
9. Dong X, Liu H, Chen Z, Wu K, Lu N, Zhang Q. Enhanced oil recovery techniques for heavy oil and oilsands reservoirs after steam injection. Appl Energy 2019;239:1190-211.
10. Huang K, Zhu W, Sun L, Wang Q, Liu Q. Experimental study on gas EOR for heavy oil in glutenite reservoirs after water flooding. J Pet Sci Eng 2019;181:106130.
11. Yang Y, Li L, Wang X, et al. A surfactant for enhanced heavy oil recovery in carbonate reservoirs in high-salinity and high-temperature conditions. Energies 2020;13:4525.
12. Sedaghat MH, Ghazanfari MH, Masihi M, Rashtchian D. Experimental and numerical investigation of polymer flooding in fractured heavy oil five-spot systems. J Pet Sci Eng 2013;108:370-82.
13. Jamaloei B, Dong M, Mahinpey N. Experimental and numerical study of strategies for improvement of cyclic solvent injection in thin heavy-oil reservoirs. SPE Reserv Evaluation Eng 2020;24:127-58.
14. Gao C, Li X, Guo L, Zhao F. Heavy oil production by carbon dioxide injection. Greenhouse Gas Sci Technol 2013;3:185-95.
15. Zhou X, Yuan Q, Peng X, Zeng F, Zhang L. A critical review of the CO2 huff ‘n’ puff process for enhanced heavy oil recovery. Fuel 2018;215:813-24.
16. Davarpanah A, Mirshekari B. Experimental study of CO2 solubility on the oil recovery enhancement of heavy oil reservoirs. J Therm Anal Calorim 2020;139:1161-9.
17. Dai C, Wang X, Li Y, et al. Spontaneous imbibition investigation of self-dispersing silica nanofluids for enhanced oil recovery in low-permeability cores. Energy Fuels 2017;31:2663-8.
18. Luo D, Zhang F, Ding F, Ren B, Ren Z. Interactions between amphiphilic Janus nanosheets and a nonionic polymer in aqueous and biphasic systems. Soft Matter 2019;15:7472-8.
19. Tarboush BJ, Husein MM. Adsorption of asphaltenes from heavy oil onto in situ prepared NiO nanoparticles. J Colloid Interface Sci 2012;378:64-9.
20. Mazloom M, Hemmati-sarapardeh A, Husein MM, Shokrollahzadeh Behbahani H, Zendehboudi S. Application of nanoparticles for asphaltenes adsorption and oxidation: a critical review of challenges and recent progress. Fuel 2020;279:117763.
21. Taborda EA, Franco CA, Lopera SH, Alvarado V, Cortés FB. Effect of nanoparticles/nanofluids on the rheology of heavy crude oil and its mobility on porous media at reservoir conditions. Fuel 2016;184:222-32.
22. Taborda EA, Franco CA, Ruiz MA, Alvarado V, Cortés FB. Experimental and theoretical study of viscosity reduction in heavy crude oils by addition of nanoparticles. Energy Fuels 2017;31:1329-38.
23. Saha R, Uppaluri RVS, Tiwari P. Silica nanoparticle assisted polymer flooding of heavy crude oil: emulsification, rheology, and wettability alteration characteristics. Ind Eng Chem Res 2018;57:6364-76.
24. Wang J, Liu L, Zhang L, Li Z. Aquathermolysis of heavy crude oil with amphiphilic nickel and iron catalysts. Energy Fuels 2014;28:7440-7.
25. Lakhova A, Petrov S, Ibragimova D, et al. Aquathermolysis of heavy oil using nano oxides of metals. J Pet Sci Eng 2017;153:385-90.
26. Yi S, Babadagli T, Andy Li H. Use of nickel nanoparticles for promoting aquathermolysis reaction during cyclic steam stimulation. SPE Journal 2017;23:145-56.
27. Luo D, Wang F, Zhu J, et al. Nanofluid of graphene-based amphiphilic Janus nanosheets for tertiary or enhanced oil recovery: High performance at low concentration. Proc Natl Acad Sci U S A 2016;113:7711-6.
28. Luo D, Wang F, Zhu J, et al. Secondary oil recovery using graphene-based amphiphilic Janus nanosheet fluid at an ultralow concentration. Ind Eng Chem Res 2017;56:11125-32.
29. Pei H, Shu Z, Zhang G, et al. Experimental study of nanoparticle and surfactant stabilized emulsion flooding to enhance heavy oil recovery. J Pet Sci Eng 2018;163:476-83.
30. Lee J, Huang J, Babadagli T. Dynamics of emulsion generation and stability during heavy oil displacement with chemicals and nanoparticles: qualitative analysis using visual 2D data. Fuel 2020;270:117502.
31. Luo D, Ren Z. Synthesis of sodium nanoparticles for promising extraction of heavy oil. Mater Today Phys 2021;16:100276.
32. Mason PE, Uhlig F, Vaněk V, Buttersack T, Bauerecker S, Jungwirth P. Coulomb explosion during the early stages of the reaction of alkali metals with water. Nat Chem 2015;7:250-4.
33. Saha R, Uppaluri RV, Tiwari P. Influence of emulsification, interfacial tension, wettability alteration and saponification on residual oil recovery by alkali flooding. J Ind Eng Chem 2018;59:286-96.
34. Comer T. The effect of iron bearing minerals on surfactant adsorption in chemical enhanced oil recovery applications. Available from: https://hdl.handle.net/10657/4527. [Last accessed on 15 Sep 2021].
35. Sharma P, Kostarelos K, Xiong X. Single phase microemulsions applied to oil sands. SPE Western Regional Meeting; 2018.
36. Styles Y, de Klerk A. Sodium conversion of oilsands bitumen-derived asphaltenes. Energy Fuels 2016;30:5214-22.
37. Nourozieh H, Kariznovi M, Abedi J. Viscosity measurement and modeling for mixtures of Athabasca bitumen/n-pentane at temperatures up to 200 °C. SPE Journal 2014;20:226-38.
38. Bayat M, Lashkarbolooki M, Hezave AZ, Ayatollahi S. Investigation of gas injection flooding performance as enhanced oil recovery method. J Nat Gas Sci Eng 2016;29:37-45.
39. Gong H, Li Y, Dong M, Ma S, Liu W. Effect of wettability alteration on enhanced heavy oil recovery by alkaline flooding. Colloids Surf A Physicochem Eng Asp 2016;488:28-35.
40. Hart A, Leeke G, Greaves M, Wood J. Down-hole heavy crude oil upgrading by CAPRI: effect of hydrogen and methane gases upon upgrading and coke formation. Fuel 2014;119:226-35.
41. Omar AE. Some aspects of miscible flooding with refinery flare gas. Energy Sources 1991;13:217-28.
