REFERENCES
1. Tian, W.; Li, Z.; Wang, Y.; Zhang, G. Height uniformity simulation and experimental study of electroplating gold bump for 2.5D/3D integrated packaging. Micromachines 2022, 13, 1537.
2. Cui, H.; Tian, W.; Zhang, Y.; Chen, Z. The study of the reliability of complex components during the electromigration process. Micromachines 2023, 14, 499.
3. Shen, W. W.; Chen, K. N. Three-dimensional integrated circuit (3D IC) key technology: through-silicon via (TSV). Nanoscale. Res. Lett. 2017, 12, 56.
4. Park, S.; Chun, B.; Kim, S.; Kim, H.; So, H. Microstructural analysis and design of electroplated-Cu micropillar under different process variables and pattern structures. Mater. Des. 2025, 252, 113715.
5. Li, W.; Li, Z.; Zeng, F. Y.; et al. Cu pillar electroplating using a synthetic polyquaterntum leveler and its coupling effect on SAC305/Cu solder joint voiding. Materials 2024, 17, 5405.
6. Singh, N.; Srivastava, K.; Kumar, A.; et al. Challenges and opportunities in engineering next-generation 3D microelectronic devices: improved performance and higher integration density. Nanoscale. Adv. 2024, 6, 6044-60.
7. Zhang, M.; Qin, F.; Chen, S.; et al. Holding time effect on mechanical properties and protrusion behaviors of through silicon via copper under various annealing processes. Mater. Sci. Semicond. Process. 2023, 158, 107353.
8. Tang, S.; Chen, J.; Hu, Y. B.; et al. Brief overview of the impact of thermal stress on the reliability of through silicon via: analysis, characterization, and enhancement. Mater. Sci. Semicond. Process. 2024, 183, 108745.
9. Wang, F.; Zhao, Z.; Wang, F.; Wang, Y.; Nie, N. A novel model for through-silicon via (TSV) filling process simulation considering three additives and current density effect. J. Micromech. Microeng. 2017, 27, 125017.
10. Tao, Y.; Liang, C.; Mei, Z.; et al. Numerical simulation of copper electrodeposition for through silicon via (TSV) with SPS-PEG-Cl additive system. Microelectron. J. 2024, 144, 106089.
11. Wang, F.; Wang, F.; Liu, X.; Liu, J. Experimental study of current density in copper filling process within deep through-silicon vias with high aspect ratio. J. Micromech. Microeng. 2019, 29, 125013.
12. Zhang, Y.; Ding, G.; Wang, H.; Cheng, P. Microstructure of electrodeposited Cu micro-cylinders in high-aspect-ratio blind holes and crystallographic texture of the Cu overburden film. J. Mater. Sci. Technol. 2016, 32, 355-61.
13. Hasegawa, M.; Mieszala, M.; Zhang, Y.; Erni, R.; Michler, J.; Philippe, L. Orientation-controlled nanotwinned copper prepared by electrodeposition. Electrochim. Acta. 2015, 178, 458-67.
14. Lu, W.; An, F.; Liebscher, C. H. Detwinning/twin growth-induced phase transformation in a metastable compositionally complex alloy. Microstructures 2022, 2, 17.
15. Bezzola, A.; Bales, B. B.; Petzold, L. R.; Alkire, R. C. Numerical scaling studies of kinetically-limited electrochemical nucleation and growth with accelerated stochastic simulations. J. Electrochem. Soc. 2014, 161, E3001-8.
16. Xu, X.; Tong, X.; Wu, G.; Zhang, L. Ameliorating the microstructure and mechanical properties of Al-Cu-Li alloy through aging temperature in a novel thermo-mechanical treatment. Microstructures 2025, 5, 2025089.
17. Grujicic, D.; Pesic, B. Electrodeposition of copper: the nucleation mechanisms. Electrochim. Acta. 2002, 47, 2901-12.
18. Lu, L.; Chen, X.; Huang, X.; Lu, K. Revealing the maximum strength in nanotwinned copper. Science 2009, 323, 607-10.
19. Chen, P.; Shen, W.; Chen, Z.; et al. Surface atom migration-involved two-dimensional nucleation and growth of nanotwinned copper in DC electrodeposition. Acta. Mater. 2024, 262, 119468.
20. Zhang, X.; Wang, H.; Chen, X. H.; et al. High-strength sputter-deposited Cu foils with preferred orientation of nanoscale growth twins. Appl. Phys. Lett. 2006, 88, 173116.
21. Fan, C.; Xie, D.; Li, J.; et al. 9R phase enabled superior radiation stability of nanotwinned Cu alloys via in situ radiation at elevated temperature. Acta. Mater. 2019, 167, 248-56.
22. R., Landau, U. Mechanistic analysis of the “bottom-up” fill in copper interconnect metallization. J. Electrochem. Soc. 2009, 156, 351-5.
23. Braun, T. M.; Josell, D.; John, J.; Moffat, T. P. Editors’ choice - simulation of copper electrodeposition in through-hole vias. J. Electrochem. Soc. 2019, 167, 013510.
24. Lui, G.; Chen, D.; Kuo, J. EBSD characterization of twinned copper using pulsed electrodeposition. J. Phys. D. Appl. Phys. 2009, 42, 215410.
25. Atanasova, T. A.; Strubbe, K.; Vereecken, P. M. Adsorption/desorption of suppressor complex on copper: description of the critical potential. ECS. Trans. 2011, 33, 13-26.
26. Li, Q.; Song, J.; Liu, G.; Liu, Y.; Wang, J.; Zeng, X. Migration kinetics of twinning disconnections in nanotwinned Cu: an in situ HRTEM deformation study. Scr. Mater. 2021, 194, 113621.
27. Han, J.; Wu, Y.; Zhao, K.; Wang, H.; Liu, S.; Liu, X. Effects of controlling grain growth mode on microstructures and properties of Cu foil. J. Mater. Res. Technol. 2023, 24, 2018-27.
