REFERENCES
1. Ahn, J. H.; Han, S. Z.; Choi, E.; et al. The effect of bimodal structure with nanofibers and normal precipitates on the mechanical and electrical properties of Cu Ni Si alloy. Mater. Charact. 2020, 170, 110642.
2. Ren, K.; Liao, X.; Pang, Y.; et al. Composition-driven fibrous-to-lamellar transition of discontinuous precipitates in Cu-Ni-Si alloys. Mater. Design. 2025, 260, 115102.
3. Shan, Y.; Zhang, Y.; Zhang, C.; et al. Study on the microstructure and mechanism of stress relaxation behavior of Cu–Ni–Si alloy by two-stage rolling deformation. Mater. Sci. Eng. A. 2024, 908, 146946.
4. Yang, Z.; Wu, Y.; Zhou, L.; Li, B.; Jiang, F.; Lu, J. Effects of micron-sized Cr3Si particles on microstructure and properties of CuNiSiCr alloy. J. Mater. Res. Technol. 2025, 34, 2273-84.
5. Shan, Y.; Zhang, Y.; Zhang, C.; et al. Study on the microstructure evolution and strengthening mechanism of Cu-Ni-Si alloy after two-stage rolling and aging. Mater. Design. 2025, 254, 113935.
6. Semboshi, S.; Sato, S.; Iwase, A.; Takasugi, T. Discontinuous precipitates in age-hardening CuNiSi alloys. Mater. Charact. 2016, 115, 39-45.
7. Liang, J.; Xie, G.; Liu, F.; Xue, W.; Wang, R.; Liu, X. Optimizing the overall performance of Cu-Ni-Si alloy via controlling nanometer-lamellar discontinuous precipitation structure. Int. J. Miner. Metall. Mater. 2025, 32, 915-24.
8. Liao, X.; Li, L.; Ren, K.; et al. Effect of misorientation of grain boundaries on the discontinuous precipitates of Cu–Ni–Si alloy. J. Mater. Res. Technol. 2023, 26, 2060-9.
9. Goto, M.; Yamamoto, T.; Han, S.; et al. Simultaneous increase in electrical conductivity and fatigue strength of Cu-Ni-Si alloy by utilizing discontinuous precipitates. Mater. Lett. 2021, 288, 129353.
10. Zhang, H.; Fu, H.; Sun, J.; Jiang, L.; Zhu, S.; Xie, J. Data-driven multi-process modeling and integrated design strategy for complex high-performance alloys. Acta. Mater. 2026, 302, 121648.
11. Sheikh, S.; Vela, B.; Honarmandi, P.; et al. An automated computational framework to construct printability maps for additively manufactured metal alloys. npj. Comput. Mater. 2024, 10, 252.
12. Sowards, J. W.; Crabtree, E.; O’Connor, A.; Michael, F. N.; Mireles, O. Solidification cracking of refractory alloys: a computational and machine learning study to investigate composition-dependence for improved weldability and additive manufacturability. Mater. Design. 2026, 263, 115679.
13. Pan, J.; Shi, R.; Zhang, Z.; et al. Composition-deformation mechanism-property machine learning model for strength-ductility improvement of β-type titanium alloys. Int. J. Plast. 2025, 194, 104461.
14. Xiao, X.; Wang, Z.; Yun, P.; et al. An interatomic-energy-based new materials design strategy combining DFT calculations and active machine learning. J. Mater. Sci. Technol. 2026, 267, 13-22.
15. Yin, J.; Lei, Q.; Yan, W.; et al. Unifying composition and process design: a heterogeneous graph neural network for discovering high‐performance Cu alloys. Adv. Sci. 2026, e24364.
16. Yun, P.; Fu, H.; Zhang, H.; et al. Mechanical and electrical properties dataset of Cu-Cr-X alloys generated with automated figure data extraction. Sci. Data. 2025, 12, 2023.
17. Jiang, X.; Fu, H.; Bai, Y.; et al. Interpretable machine learning applications: a promising prospect of AI for materials. Adv. Funct. Mater. 2025, 35, 2507734.
18. Liu, Y.; Wang, Z.; Wang, Y.; et al. Data-driven composition design and property optimization of solid solution and precipitation simultaneously strengthened non-oriented silicon steel. Mater. Design. 2024, 242, 113011.
19. Zhang, L.; Choi, Y. S. Denoising diffusion probabilistic model-based tabular data augmentation for improved phase classification of high-entropy alloys. Acta. Mater. 2026, 310, 122124.
20. Wang, Q.; Qin, X.; Xia, S.; et al. Interpretable machine learning excavates a low-alloyed magnesium alloy with strength-ductility synergy based on data augmentation and reconstruction. J. Magnes. Alloys. 2025, 13, 2866-83.
21. Ye, Y.; Li, Y.; Ouyang, R.; Zhang, Z.; Tang, Y.; Bai, S. Improving machine learning based phase and hardness prediction of high-entropy alloys by using Gaussian noise augmented data. Comput. Mater. Sci. 2023, 223, 112140.
22. Yin, J.; Lei, Q.; Li, X.; et al. A novel neural network-based alloy design strategy: gated recurrent unit machine learning modeling integrated with orthogonal experiment design and data augmentation. Acta. Mater. 2023, 243, 118420.
23. Balamurugan, R.; Chen, J.; Meng, C.; Liu, Y. Data-driven approaches for fatigue prediction of Ti–6Al–4V parts fabricated by laser powder bed fusion. Int. J. Fatigue. 2024, 182, 108167.
24. Sun, J.; Fu, H.; Zhang, H.; Zhao, M.; Yun, P.; Xie, J. Rapid design of processing parameters for Zero-Sample alloys via multi-acquisition-function Bayesian optimization. Mater. Sci. Eng. A. 2025, 944, 148904.
25. Shan, Y.; Zhang, C.; Zhang, Y.; et al. Influence of different rolling passes and deformation amounts on the microstructure evolution and strengthening mechanism of Cu–Ni–Si alloy. J. Mater. Res. Technol. 2024, 33, 3205-20.
26. Xu, Z.; Shi, H.; Liu, S.; et al. Effect of aging temperature on microstructure and properties of cold-rolled Cu-Ni-Si alloy. Mater. Today. Commun. 2024, 40, 109438.
27. Todeschini, R.; Ballabio, D.; Consonni, V.; Sahigara, F.; Filzmoser, P. Locally centred Mahalanobis distance: a new distance measure with salient features towards outlier detection. Anal. Chim. Acta. 2013, 787, 1-9.
28. Rousseeuw, P. J.; Hubert, M. Robust statistics for outlier detection. WIREs. Data. Min. Knowl. Discov. 2011, 1, 73-9.
29. Li, H.; Wang, Y.; Lei, B.; et al. Composite waveform and variable amplitude fatigue life prediction for TC21 titanium alloy welded joints by machine learning model. Thin-Walled. Struct. 2026, 225, 114768.
30. Zhou, H.; Huang, Y.; Xu, P.; et al. Machine-learning-assisted design of high-hardness high-entropy alloys based on component space screening. Mater. Design. 2026, 264, 115732.
31. Yu, G.; Long, Y.; Yue, D.; et al. Machine learning rapid prediction for quality indicators in advanced manufacturing processes of titanium alloys. Powder. Technol. 2026, 473, 122166.
32. Kwak, S.; Kim, J.; Ding, H.; et al. Machine learning prediction of the mechanical properties of γ-TiAl alloys produced using random forest regression model. J. Mater. Res. Technol. 2022, 18, 520-30.
33. Liang, X.; Liu, S.; Zhang, H.; et al. Machine learning and whale optimization algorithm for enhanced hydrogen storage alloy design. Mater. Today. Commun. 2025, 49, 113870.
34. Gupta, A. K.; Chakroborty, S.; Ghosh, S. K.; Ganguly, S. A machine learning model for multi-class classification of quenched and partitioned steel microstructure type by the k-nearest neighbor algorithm. Comput. Mater. Sci. 2023, 228, 112321.
35. Liu, Z.; Wu, H.; Liang, W.; et al. Experimental investigation and machine learning prediction of stress relaxation resistance in C17200 alloy under aging treatment. J. Alloys. Compd. 2026, 1057, 186702.
36. Yuvaraj, K.; Ullal, V. N.; Manujesh, B.; Manojkumar, B.; Mohan, S.; Dinesha, P. Experimental and machine learning investigation of dry sliding wear behavior in multiwall carbon nanotube reinforced stir-cast Al7475 alloy. J. Mater. Res. Technol. 2026, 41, 1368-80.




