REFERENCES
1. Peng, B.; Liu, Z.; Sementa, L.; et al. Embedded oxide clusters stabilize sub-2 nm Pt nanoparticles for highly durable fuel cells. Nat. Catal. 2024, 7, 818-28.
2. Liu, E.; Higgins, D. Tunable layered Mn oxides for oxygen electrocatalysis. Nat. Catal. 2024, 7, 469-71.
3. Lee, S.; Seong, J. G.; Jo, Y.; et al. Self-assembled network polymer electrolyte membranes for application in fuel cells at 250 °C. Nat. Energy. 2024, 9, 849-61.
4. Huang, G.; Wu, Y.; Li, Y.; et al. Lattice hydrogen boosts CO tolerance of Pd anode catalysts in high-temperature proton exchange membrane fuel cells. Adv. Funct. Mater. 2025, 35, 2415358.
5. Liu, S.; Rasinski, M.; Rahim, Y.; et al. Influence of operating conditions on the degradation mechanism in high-temperature polymer electrolyte fuel cells. J. Power. Sources. 2019, 439, 227090.
6. Tang, H.; Geng, K.; Wu, L.; et al. Fuel cells with an operational range of -20 °C to 200 °C enabled by phosphoric acid-doped intrinsically ultramicroporous membranes. Nat. Energy. 2022, 7, 153-62.
7. Zhang, Z.; Xia, Z.; Huang, J.; et al. Uneven phosphoric acid interfaces with enhanced electrochemical performance for high-temperature polymer electrolyte fuel cells. Sci. Ad. 2023, 9, eade1194.
8. Xu, C.; Wang, S.; Zheng, Y.; et al. Performance enhancement from catalysts to membrane electrode assemblies for high-temperature proton exchange membrane fuel cells. Nano. Energy. 2025, 139, 110931.
9. Haider, R.; Wen, Y.; Ma, Z. F.; et al. High temperature proton exchange membrane fuel cells: progress in advanced materials and key technologies. Chem. Soc. Rev. 2021, 50, 1138-87.
10. Yu, J.; Singh, K. P.; Kim, S.; et al. Active and stable PtP2-based electrocatalysts solve the phosphate poisoning issue of high temperature fuel cells. J. Mater. Chem. A. 2023, 11, 6413-27.
11. Wang, S.; Zheng, Y.; Xv, C.; et al. Performance failure mechanisms and mitigation strategies of high-temperature proton exchange membrane fuel cells. Prog. Mater. Sci. 2025, 148, 101389.
12. Li, H.; Zuo, P.; Wu, W.; et al. Electrode binder design for high-power, low-Pt loading and durable high temperature fuel cells. Energy. Environ. Sci. 2024, 17, 3651-9.
13. Tang, H.; Geng, K.; Aili, D.; et al. Low Pt loading for high-performance fuel cell electrodes enabled by hydrogen-bonding microporous polymer binders. Nat. Commun. 2022, 13, 7577.
14. Liang, J.; Wan, Y.; Lv, H.; et al. Metal bond strength regulation enables large-scale synthesis of intermetallic nanocrystals for practical fuel cells. Nat. Mater. 2024, 23, 1259-67.
15. Yan, Y.; Du, J. S.; Gilroy, K. D.; Yang, D.; Xia, Y.; Zhang, H. Intermetallic nanocrystals: syntheses and catalytic applications. Adv. Mater. 2017, 29, 1605997.
16. Li, J.; Sun, S. Intermetallic nanoparticles: synthetic control and their enhanced electrocatalysis. Acc. Chem. Res. 2019, 52, 2015-25.
17. Dai, Y.; Lu, P.; Cao, Z.; Campbell, C. T.; Xia, Y. The physical chemistry and materials science behind sinter-resistant catalysts. Chem. Soc. Rev. 2018, 47, 4314-31.
18. Li, W.; Wang, D.; Liu, T.; et al. Doping-modulated strain enhancing the phosphate tolerance on PtFe alloys for high-temperature proton exchange membrane fuel cells. Adv. Funct. Mater. 2022, 32, 2109244.
19. Hu, Y.; Shen, T.; Zhao, X.; et al. Combining structurally ordered intermetallics with N-doped carbon confinement for efficient and anti-poisoning electrocatalysis. Appl. Catal. B. Environ. 2020, 279, 119370.
20. Chougule, S. S.; Jeffery, A. A.; Roy, Chowdhury. S.; et al. Antipoisoning catalysts for the selective oxygen reduction reaction at the interface between metal nanoparticles and the electrolyte. Carbon. Energy. 2023, 5, e293.
21. Huang, G.; Li, Y.; Du, S.; et al. Silica-facilitated proton transfer for high-temperature proton-exchange membrane fuel cells. Sci. China. Chem. 2021, 64, 2203-11.
22. Zhang, D.; Kong, Z.; Huang, G.; et al. Defective g-C3N4 optimizes phosphate distribution in the catalytic layer and boosts the performance of high-temperature proton exchange membrane fuel cells. Sci. China. Mater. 2023, 66, 3468-74.
23. Zhang, J.; Zhang, J.; Luo, L.; et al. Phosphoric acid sustained-release strategy boosting durability of high temperature proton exchange membrane fuel cells. Chem. Eng. J. 2025, 518, 164518.
24. Li, G.; Deng, C.; Ji, F.; Zheng, B.; Wang, X.; Wang, T. Balancing proton and mass transfers in cathode catalyst layer of high-temperature proton exchange membrane fuel cell via gradient porous structure design. J. Power. Sources. 2024, 593, 233807.
25. Kwon, S. H.; Lee, S. Y.; Kim, H.; Jang, S. S.; Lee, S. G. Distribution characteristics of phosphoric acid and PTFE binder on Pt/C surfaces in high-temperature polymer electrolyte membrane fuel cells: molecular dynamics simulation approach. Int. J. Hydrogen. Energy. 2021, 46, 17295-305.
26. Yoo, T. Y.; Lee, J.; Kim, S.; et al. Scalable production of an intermetallic Pt-Co electrocatalyst for high-power proton-exchange-membrane fuel cells. Energy. Environ. Sci. 2023, 16, 1146-54.
27. Sun, T.; Wang, J.; Qiu, C.; et al. B, N codoped and defect-rich nanocarbon material as a metal-free bifunctional electrocatalyst for oxygen reduction and evolution reactions. Adv. Sci. 2018, 5, 1800036.
28. Jiang, H.; Wang, Y.; Hao, J.; Liu, Y.; Li, W.; Li, J. N and P co-functionalized three-dimensional porous carbon networks as efficient metal-free electrocatalysts for oxygen reduction reaction. Carbon 2017, 122, 64-73.
29. Xia, L.; Sun, Z.; Wu, Y.; et al. Leveraging doping and defect engineering to modulate exciton dissociation in graphitic carbon nitride for photocatalytic elimination of marine oil spill. Chem. Eng. J. 2022, 439, 135668.
30. Yang, C. L.; Wang, L. N.; Yin, P.; et al. Sulfur-anchoring synthesis of platinum intermetallic nanoparticle catalysts for fuel cells. Science 2021, 374, 459-64.
31. Wan, R.; Luo, M.; Wen, J.; Liu, S.; Kang, X.; Tian, Y. Pt-Co single atom alloy catalysts: accelerated water dissociation and hydrogen evolution by strain regulation. J. Energy. Chem. 2022, 69, 44-53.
32. Chen, Y.; Sun, M.; Wu, M.; et al. Enhancing oxygen reduction activity via tailoring microstrain in PdMo nanoalloy through repetitive hydrogen absorption-release. ACS. Catal. 2024, 14, 9354-63.
33. Xiong, Y.; Ma, Y.; Zou, L.; et al. N-doping induced tensile-strained Pt nanoparticles ensuring an excellent durability of the oxygen reduction reaction. J. Catal. 2020, 382, 247-55.
34. Gan, Z.; Shu, C.; Deng, C.; Du, W.; Huang, B.; Tang, W. Confinement of Pt NPs by hollow-porous-carbon-spheres via pore regulation with promoted activity and durability in the hydrogen evolution reaction. Nanoscale 2021, 13, 18273-80.
35. Wan, K.; Luo, C.; Wang, J.; et al. Synergizing amino tethering and carbon shell confinement enables confinement synthesis of PtCo intermetallic catalysts for highly durable fuel cells. ACS. Catal. 2024, 14, 10181-93.
36. Holzwarth, U.; Gibson, N. The Scherrer equation versus the 'Debye-Scherrer equation'. Nat. Nanotechnol. 2011, 6, 534.
37. Xie, Y.; Liang, X.; Li, Z.; et al. Unraveling the cause of strong metal-support interaction formation: disparities in metal nanoparticle anchoring mechanisms. Angew. Chem. Int. Ed. 2025, 64, e202505820.
38. Xu, M.; Peng, M.; Tang, H.; Zhou, W.; Qiao, B.; Ma, D. Renaissance of strong metal-support interactions. J. Am. Chem. Soc. 2024, 146, 2290-307.
39. Zhou, M.; Chen, B.; Zhang, N.; et al. Intrinsic carbon defects in nitrogen and sulfur doped porous carbon nanotubes accelerate oxygen reduction and sulfur reduction for electrochemical energy conversion and storage. ACS. Appl. Nano. Mater. 2023, 6, 15147-58.
40. Li, Z.; Lin, J.; Li, B.; Yu, C.; Wang, H.; Li, Q. Construction of heteroatom-doped and three-dimensional graphene materials for the applications in supercapacitors: a review. J. Energy. Storage. 2021, 44, 103437.
41. Xiao, W.; Yan, D.; Zhao, Q.; Bukhvalov, D.; Yang, X. Regulating electrocatalytic properties of oxygen reduction reaction via strong coupling effects between Co-NC sites and intermetallic Pt3Co. Appl. Catal. B. Environ. Energy. 2024, 346, 123740.
42. Zeng, Y.; Liang, J.; Li, C.; et al. Regulating catalytic properties and thermal stability of Pt and PtCo intermetallic fuel-cell catalysts via strong coupling effects between single-metal site-rich carbon and Pt. J. Am. Chem. Soc. 2023, 145, 17643-55.
43. Hu, S.; Xu, W.; Tian, N.; et al. A P-O functional group anchoring Pt - Co electrocatalyst for high-durability PEMFCs. Energy. Environ. Sci. 2024, 17, 3099-111.
44. Ye, S.; Chen, W.; Ou, Z.; et al. Harnessing the synergistic interplay between atomic-scale vacancies and ligand effect to optimize the oxygen reduction activity and tolerance performance. Angew. Chem. Int. Ed. 2025, 64, e202414989.
45. Bu, L.; Zhang, N.; Guo, S.; et al. Biaxially strained PtPb/Pt core/shell nanoplate boosts oxygen reduction catalysis. Science 2016, 354, 1410-4.
46. He, Q.; Shyam, B.; Nishijima, M.; Ramaker, D.; Mukerjee, S. Mitigating phosphate anion poisoning of cathodic Pt/C catalysts in phosphoric acid fuel cells. J. Phys. Chem. C. 2013, 117, 4877-87.
47. He, Q.; Yang, X.; Chen, W.; Mukerjee, S.; Koel, B.; Chen, S. Influence of phosphate anion adsorption on the kinetics of oxygen electroreduction on low index Pt(hkl) single crystals. Phys. Chem. Chem. Phys. 2010, 12, 12544-55.
48. Lin, H.; Hu, Z.; Lim, K. H.; et al. High-temperature rotating disk electrode study of platinum bimetallic catalysts in phosphoric acid. ACS. Catal. 2023, 13, 5635-42.
49. Lin, L.; Cai, Z.; Niu, Y.; et al. H induced metal-insulation transition boosts the stability of high temperature polymer electrolyte membrane fuel cells. Angew. Chem. Int. Ed. 2025, 64, e202419919.
50. Chung, Y. H.; Chung, D. Y.; Jung, N.; Sung, Y. E. Tailoring the electronic structure of nanoelectrocatalysts induced by a surface-capping organic molecule for the oxygen reduction reaction. J. Phys. Chem. Lett. 2013, 4, 1304-9.
51. Wang, L.; Wang, Y.; Li, Z.; et al. PAF-6 doped with phosphoric acid through alkaline nitrogen atoms boosting high-temperature proton-exchange membranes for high performance of fuel cells. Adv. Mater. 2023, 35, e2303535.
52. Hu, Y.; Jensen, J. O.; Pan, C.; Cleemann, L. N.; Shypunov, I.; Li, Q. Immunity of the Fe-N-C catalysts to electrolyte adsorption: Phosphate but not perchloric anions. Appl. Catal. B. Environ. 2018, 234, 357-64.
53. Park, H. Y.; Lim, D. H.; Yoo, S. J.; et al. Transition metal alloying effect on the phosphoric acid adsorption strength of Pt nanoparticles: an experimental and density functional theory study. Sci. Rep. 2017, 7, 7186.
54. Yao, D.; Zhang, W.; Ma, Q.; Xu, Q.; Pasupathi, S.; Su, H. Achieving high Pt utilization and superior performance of high temperature polymer electrolyte membrane fuel cell by employing low-Pt-content catalyst and microporous layer free electrode design. J. Power. Sources. 2019, 426, 124-33.
55. Su, H.; Jao, T.; Barron, O.; Pollet, B. G.; Pasupathi, S. Low platinum loading for high temperature proton exchange membrane fuel cell developed by ultrasonic spray coating technique. J. Power. Sources. 2014, 267, 155-9.
56. Martin, S.; Li, Q.; Steenberg, T.; Jensen, J. Binderless electrodes for high-temperature polymer electrolyte membrane fuel cells. J. Power. Sources. 2014, 272, 559-66.
57. Liang, H.; Su, H.; Pollet, B. G.; Pasupathi, S. Development of membrane electrode assembly for high temperature proton exchange membrane fuel cell by catalyst coating membrane method. J. Power. Sources. 2015, 288, 121-7.
58. Martin, S.; Li, Q.; Jensen, J. Lowering the platinum loading of high temperature polymer electrolyte membrane fuel cells with acid doped polybenzimidazole membranes. J. Power. Sources. 2015, 293, 51-6.
59. Liang, H.; Su, H.; Pollet, B. G.; Linkov, V.; Pasupathi, S. Membrane electrode assembly with enhanced platinum utilization for high temperature proton exchange membrane fuel cell prepared by catalyst coating membrane method. J. Power. Sources. 2014, 266, 107-13.
60. Su, H.; Pasupathi, S.; Bladergroen, B. J.; Linkov, V.; Pollet, B. G. Enhanced performance of polybenzimidazole-based high temperature proton exchange membrane fuel cell with gas diffusion electrodes prepared by automatic catalyst spraying under irradiation technique. J. Power. Sources. 2013, 242, 510-9.
61. Su, H.; Jao, T.; Pasupathi, S.; Bladergroen, B. J.; Linkov, V.; Pollet, B. G. A novel dual catalyst layer structured gas diffusion electrode for enhanced performance of high temperature proton exchange membrane fuel cell. J. Power. Sources. 2014, 246, 63-7.
62. Seselj, N.; Alfaro, S. M.; Bompolaki, E.; Cleemann, L. N.; Torres, T.; Azizi, K. Catalyst development for high-temperature polymer electrolyte membrane fuel cell (HT-PEMFC) applications. Adv. Mater. 2023, 35, e2302207.
63. Chao, G.; Tang, H.; Li, R.; et al. Nitrogen heterocyclic polymers with different acidophilic properties as proton exchange membranes and binders for high-temperature fuel cells. J. Membr. Sci. 2024, 692, 122297.
64. Schmies, H.; Zierdt, T.; Mueller-huelstede, J.; et al. Reduction of platinum loading in gas diffusion electrodes for high temperature proton exchange membrane fuel cell application: Characterization and effect on oxygen reduction reaction performance. J. Power. Sources. 2022, 529, 231276.
65. Yuan, H.; Dai, H.; Wei, X.; Ming, P. Internal polarization process revelation of electrochemical impedance spectroscopy of proton exchange membrane fuel cell by an impedance dimension model and distribution of relaxation times. Chem. Eng. J. 2021, 418, 129358.
