REFERENCES
1. Abdel-shafy, H. I.; Mansour, M. S. Solid waste issue: sources, composition, disposal, recycling, and valorization. Egypt. J. Pet. 2018, 27, 1275-90.
2. Miller, S. A.; Moore, F. C. Climate and health damages from global concrete production. Nat. Clim. Chang. 2020, 10, 439-43.
3. Calle Müller, C.; Pradhananga, P.; Elzomor, M. Pathways to decarbonization, circular construction, and sustainability in the built environment. Int. J. Sustain. High. Educ. 2024, 25, 1315-32.
4. Kou, S.; Poon, C.; Wan, H. Properties of concrete prepared with low-grade recycled aggregates. Constr. Build. Mater. 2012, 36, 881-9.
5. Di Maria, A.; Eyckmans, J.; Van Acker, K. Downcycling versus recycling of construction and demolition waste: combining LCA and LCC to support sustainable policy making. Waste. Manag. 2018, 75, 3-21.
6. Zhang, C.; Hu, M.; Yang, X.; et al. Upgrading construction and demolition waste management from downcycling to recycling in the Netherlands. J. Clean. Prod. 2020, 266, 121718.
7. Ogwu, M. C.; Kosoe, E. A. Innovative approaches to recycling, upcycling, and downcycling for sustainable waste management. CleanMat 2025, 2, 242-61.
8. Fang, X.; Xuan, D.; Zhan, B.; Li, W.; Poon, C. S. A novel upcycling technique of recycled cement paste powder by a two-step carbonation process. J. Clean. Prod. 2021, 290, 125192.
9. Li, X.; Lv, X.; Zhou, X.; Meng, W.; Bao, Y. Upcycling of waste concrete in eco-friendly strain-hardening cementitious composites: Mixture design, structural performance, and life-cycle assessment. J. Clean. Prod. 2022, 330, 129911.
10. Rana, A.; Kalla, P.; Verma, H.; Mohnot, J. Recycling of dimensional stone waste in concrete: a review. J. Clean. Prod. 2016, 135, 312-31.
11. Meng, Y.; Ling, T.; Mo, K. H. Recycling of wastes for value-added applications in concrete blocks: An overview. Resour. Conserv. Recycl. 2018, 138, 298-312.
12. Dong, W.; Li, W.; Tao, Z. A comprehensive review on performance of cementitious and geopolymeric concretes with recycled waste glass as powder, sand or cullet. Resour. Conserv. Recycl. 2021, 172, 105664.
13. Zimbili, O.; Salim, W.; Ndambuki, M. A review on the usage of ceramic wastes in concrete production. Int. J. Civ. Environ. Struct. Constr. Archit. Eng. 2014, 8, 91-5. https://www.academia.edu/download/43552252/A-Review-on-the-Usage-of-Ceramic-Wastes-in-Concrete-Production_2.pdf (accessed 2026-03-11).
14. Joseph, H. S.; Pachiappan, T.; Avudaiappan, S.; et al. A comprehensive review on recycling of construction demolition waste in concrete. Sustainability 2023, 15, 4932.
15. Hamada, H.; Alattar, A.; Tayeh, B.; Yahaya, F.; Thomas, B. Effect of recycled waste glass on the properties of high-performance concrete: a critical review. Case. Stud. Constr. Mater. 2022, 17, e01149.
16. Ahmad, F.; Qureshi, M. I.; Rawat, S.; Alkharisi, M. K.; Alturki, M. E-waste in concrete construction: recycling, applications, and impact on mechanical, durability, and thermal properties - a review. Innov. Infrastruct. Solut. 2025, 10, 246.
17. Infante Gomes, R.; Brazão Farinha, C.; Veiga, R.; De Brito, J.; Faria, P.; Bastos, D. CO2 sequestration by construction and demolition waste aggregates and effect on mortars and concrete performance - an overview. Renew. Sustain. Energy. Rev. 2021, 152, 111668.
18. Messahel, B.; Onyenokporo, N.; Takyie, E.; Beizaee, A.; Oyinlola, M. Upcycling agricultural and plastic waste for sustainable construction: a review. Environ. Technol. Rev. 2023, 12, 37-59.
19. Ghahsareh, F. M.; Guo, P.; Wang, Y.; Meng, W.; Li, V. C.; Bao, Y. Review on material specification, characterization, and quality control of engineered cementitious composite (ECC). Constr. Build. Mater. 2024, 442, 137699.
20. Mpungu, I. L.; Maube, O.; Nziu, P.; Mwasiagi, J. I.; Dulo, B.; Bongomin, O. Optimizing waste for energy: exploring municipal solid waste variations on torrefaction and biochar production. Int. J. Energy. Res. 2024, 2024, 4311062.
21. Manan, A.; Zhang, P.; Majdi, A.; Alattyih, W.; Ahmad, J. Utilizing waste materials in concrete: a review on mechanical and sustainable performance. Green. Mater. 2025, 1-18.
22. Alghrairi, N. N.; Aznieta, F. N.; Ibrahim, A. M.; Hu, J. W.; Najm, H. M.; Anas, S. M. Improvement of concrete characterization using nanomaterials: state‐of‐the‐art. J. Eng. 2025, 2025, 8027667.
23. Mazaheri, A. H.; Muhamad, M. R.; Yusof, F.; et al. Mechanistic insight into the carbon mineralization of alkaline-bearing mine residues and industrial wastes. J. Sustain. Metall. 2025, 11, 3289-321.
24. Mahjoubi, S.; Barhemat, R.; Meng, W.; Bao, Y. Review of AI-assisted design of low-carbon cost-effective concrete toward carbon neutrality. Artif. Intell. Rev. 2025, 58, 225.
25. Luhar, S.; Luhar, I.; Abdullah, M. M. A. B.; Hussin, K. Challenges and prospective trends of various industrial and solid wastes incorporated with sustainable green concrete. In Advances in Organic Farming; Elsevier, 2021; pp 223-40.
26. Geng, D.; Evans, S. A literature review of energy waste in the manufacturing industry. Comput. Ind. Eng. 2022, 173, 108713.
27. Shengo, L. M. Review of practices in the managements of mineral wastes: the case of waste rocks and mine tailings. Water. Air. Soil. Pollut. 2021, 232, 273.
28. Hemati, S.; Udayakumar, S.; Wesley, C.; et al. Thermal transformation of secondary resources of carbon-rich wastes into valuable industrial applications. J. Compos. Sci. 2023, 7, 8.
29. Jin, S.; Zhao, Z.; Jiang, S.; Sun, J.; Pan, H.; Jiang, L. Comparison and summary of relevant standards for comprehensive utilization of fly ash at home and abroad. IOP. Conf. Ser. Earth. Environ. Sci. 2021, 621, 012006.
30. Guo, J.; Bao, Y.; Wang, M. Steel slag in China: treatment, recycling, and management. Waste. Manag. 2018, 78, 318-30.
31. Hefni, Y.; Zaher, Y. A. E.; Wahab, M. A. Influence of activation of fly ash on the mechanical properties of concrete. Constr. Build. Mater. 2018, 172, 728-34.
32. Baikerikar, A.; Mudalgi, S.; Ram, V. V. Utilization of waste glass powder and waste glass sand in the production of eco-friendly concrete. Constr. Build. Mater. 2023, 377, 131078.
33. Tao, G.; Xiao, Y.; Yang, L.; Cui, P.; Kong, D.; Xue, Y. Characteristics of steel slag filler and its influence on rheological properties of asphalt mortar. Constr. Build. Mater. 2019, 201, 439-46.
34. Amran, M.; Onaizi, A. Sustainable admixtures to enhance long-term strength and durability properties of eco-concrete: an innovative use of Saudi agro-industrial by-products. Int. J. Build. Pathol. Adapt. 2024, 43, 591-613.
35. Zhang, N.; Wu, L.; Liu, X.; Zhang, Y. Structural characteristics and cementitious behavior of basic oxygen furnace slag mud and electric arc furnace slag. Constr. Build. Mater. 2019, 219, 11-8.
36. Gan, L.; Wang, H.; Li, X.; Qi, Y.; Zhang, C. Strength activity index of air quenched basic oxygen furnace steel slag. J. Iron. Steel. Res. Int. 2015, 22, 219-25.
37. Wang, H.; Qian, J.; Liu, J.; et al. Wear resistance analysis of steel slag aggregates based on morphology characteristics. Constr. Build. Mater. 2023, 409, 133649.
38. Du, J.; Liu, Z.; Christodoulatos, C.; Conway, M.; Bao, Y.; Meng, W. Utilization of off-specification fly ash in preparing ultra-high-performance concrete (UHPC): Mixture design, characterization, and life-cycle assessment. Resour. Conserv. Recycl. 2022, 180, 106136.
39. Yang, Z.; Xiong, X.; Li, K.; Briseghella, B.; Marano, G. C.; Chen, S. Long-term volume stability of ECC containing high-volume steel slag. Cem. Concr. Compos. 2024, 145, 105352.
40. Nguyễn, H. H.; Nguyễn, P. H.; Lương, Q.; Meng, W.; Lee, B. Y. Mechanical and autogenous healing properties of high-strength and ultra-ductility engineered geopolymer composites reinforced by PE-PVA hybrid fibers. Cem. Concr. Compos. 2023, 142, 105155.
41. Tran, N.; Van Tran, M.; Tran, P.; Nguyen, A. K.; Nguyen, C. Q. Eco-friendly 3D-printed concrete using steel slag aggregate: buildability, printability and mechanical properties. Int. J. Concr. Struct. Mater. 2024, 18, 66.
42. World Steel Association, 2021. Steel industry co-products: Fact sheet. https://worldsteel.org/wp-content/uploads/Fact-sheet-Steel-industry-co-products.pdf. (accessed 2026-03-11).
43. Meng, W.; Valipour, M.; Khayat, K. H. Optimization and performance of cost-effective ultra-high performance concrete. Mater. Struct. 2016, 50, 29.
44. Fan, L.; Meng, W.; Teng, L.; Khayat, K. H. Effect of steel fibers with galvanized coatings on corrosion of steel bars embedded in UHPC. Compos. Part. B. Eng. 2019, 177, 107445.
45. Xu, M.; Clack, H.; Xia, T.; et al. Effect of TiO2 and fly ash on photocatalytic NOx abatement of engineered cementitious composites. Constr. Build. Mater. 2020, 236, 117559.
46. Pavithra, P.; Srinivasula Reddy, M.; Dinakar, P.; Hanumantha Rao, B.; Satpathy, B.; Mohanty, A. A mix design procedure for geopolymer concrete with fly ash. J. Clean. Prod. 2016, 133, 117-25.
47. Bao, Y.; Xu, M.; Soltan, D.; et al. Three-dimensional printing multifunctional engineered cementitious composites (ECC) for structural elements. In First RILEM International Conference on Concrete and Digital Fabrication - Digital Concrete 2018; Wangler, T.; Flatt, R. J.; Eds.; RILEM Bookseries, Vol. 19; Springer International Publishing, 2018; pp 115-28.
48. Wang, Y.; Zhang, T.; Lyu, G.; Guo, F.; Zhang, W.; Zhang, Y. Recovery of alkali and alumina from bauxite residue (red mud) and complete reuse of the treated residue. J. Clean. Prod. 2018, 188, 456-65.
49. Peng, G.; Wang, X.; Ding, H.; Jia, Y. Effect of calcined red mud on the mechanical properties and microstructure of ultra-high performance concrete. Constr. Build. Mater. 2025, 484, 141891.
50. Shi, J.; Liu, Y.; Li, Z.; et al. Upcycling use of red mud-based solid waste in engineered cementitious composites: Properties, activation mechanism, and life-cycle assessment. J. Clean. Prod. 2024, 447, 141504.
51. Bellum, R. R.; Venkatesh, C.; Madduru, S. R. C. Influence of red mud on performance enhancement of fly ash-based geopolymer concrete. Innov. Infrastruct. Solut. 2021, 6, 215.
52. Sun, J.; Wang, Y.; Yang, X.; et al. Red mud utilization in fiber-reinforced 3D-printed concrete: mechanical properties and environmental impact analysis. Constr. Build. Mater. 2025, 462, 139830.
53. Zhou, G.; Wang, Y.; Qi, T.; et al. Toward sustainable green alumina production: a critical review on process discharge reduction from gibbsitic bauxite and large-scale applications of red mud. J. Environ. Chem. Eng. 2023, 11, 109433.
54. Du, J.; Meng, W.; Khayat, K. H.; et al. New development of ultra-high-performance concrete (UHPC). Compos. Part. B. Eng. 2021, 224, 109220.
55. Meng, W.; Khayat, K. H. Effect of hybrid fibers on fresh properties, mechanical properties, and autogenous shrinkage of cost-effective UHPC. J. Mater. Civ. Eng. 2018, 30, 04018030.
56. Fu, C.; Guo, R.; Lin, Z.; Xia, H.; Yang, Y.; Ma, Q. Effect of nanosilica and silica fume on the mechanical properties and microstructure of lightweight engineered cementitious composites. Constr. Build. Mater. 2021, 298, 123788.
57. Bajpai, R.; Choudhary, K.; Srivastava, A.; Sangwan, K. S.; Singh, M. Environmental impact assessment of fly ash and silica fume based geopolymer concrete. J. Clean. Prod. 2020, 254, 120147.
58. Nassrullah, G.; Ali, M. M.; Abu Al-rub, R. K.; et al. Optimizing cement-based material formulation for 3D printing: Integrating carbon nanotubes and silica fume. Case. Stud. Constr. Mater. 2025, 22, e04579.
59. Türköz, M.; Umu, S. U.; Öztürk, O. Effect of silica fume as a waste material for sustainable environment on the stabilization and dynamic behavior of dispersive soil. Sustainability 2021, 13, 4321.
60. Guo, P.; Meng, W.; Nassif, H.; Gou, H.; Bao, Y. New perspectives on recycling waste glass in manufacturing concrete for sustainable civil infrastructure. Constr. Build. Mater. 2020, 257, 119579.
61. Guo, P.; Meng, W.; Du, J.; Stevenson, L.; Han, B.; Bao, Y. Lightweight ultra-high-performance concrete (UHPC) with expanded glass aggregate: development, characterization, and life-cycle assessment. Constr. Build. Mater. 2023, 371, 130441.
62. Guo, P.; Bao, Y.; Meng, W. Review of using glass in high-performance fiber-reinforced cementitious composites. Cem. Concr. Compos. 2021, 120, 104032.
63. Çelik, A. İ.; Tunç, U.; Bahrami, A.; et al. Use of waste glass powder toward more sustainable geopolymer concrete. J. Mater. Res. Technol. 2023, 24, 8533-46.
64. Liu, J.; Li, S.; Gunasekara, C.; Fox, K.; Tran, P. 3D-printed concrete with recycled glass: effect of glass gradation on flexural strength and microstructure. Constr. Build. Mater. 2022, 314, 125561.
65. United States Environmental Protection Agency, 2020. Advancing sustainable materials management: facts and figures report. https://www.epa.gov/facts-and-figures-about-materials-waste-and-recycling/advancing-sustainable-materials-management. (accessed 2026-03-11).
66. Aprianti, E.; Shafigh, P.; Bahri, S.; Farahani, J. N. Supplementary cementitious materials origin from agricultural wastes - a review. Constr. Build. Mater. 2015, 74, 176-87.
67. Wang, Y.; Bao, Y.; Meng, W. Lightweight calcium-silicate-hydrate nacre with high strength and high toughness. ACS. Nano. 2024, 18, 23655-71.
68. Du, J.; Tan, X.; Wang, Y.; Bao, Y.; Meng, W. Reducing the cracking potential of ultra-high-performance concrete (UHPC) with the prewet expansive agent. Constr. Build. Mater. 2024, 431, 136597.
69. Khayat, K. H.; Meng, W.; Valipour, M.; Hopkins, M. Use of Lightweight sand for internal curing to improve performance of concrete infrastructure. Report No. CMR 18-005. Missouri Department of Transportation. Construction and Materials Division. https://rosap.ntl.bts.gov/view/dot/36264. (accessed 2026-03-11).
70. Kushwah, S.; Singh, S.; Agarwal, R.; et al. Mixture of biochar as a green additive in cement-based materials for carbon dioxide sequestration. J. Mater. Sci. Mater. Eng. 2024, 19, 27.
71. Vieira, A. P.; Toledo Filho, R. D.; Tavares, L. M.; Cordeiro, G. C. Effect of particle size, porous structure and content of rice husk ash on the hydration process and compressive strength evolution of concrete. Constr. Build. Mater. 2020, 236, 117553.
72. Souza, M. M.; Anjos, M. A.; Sá, M. V.; Souza, N. S. Developing and classifying lightweight aggregates from sewage sludge and rice husk ash. Case. Stud. Constr. Mater. 2020, 12, e00340.
73. Kang, S.; Hong, S.; Moon, J. The use of rice husk ash as reactive filler in ultra-high performance concrete. Cem. Concr. Res. 2019, 115, 389-400.
74. Zhang, Z.; Yang, F.; Liu, J.; Wang, S. Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of fly ash by rice husk ash. Cem. Concr. Res. 2020, 137, 106200.
75. Saloni.; Jangra, P.; Yan Lim, Y.; Pham, T. M. Influence of Portland cement on performance of fine rice husk ash geopolymer concrete: Strength and permeability properties. Constr. Build. Mater. 2021, 300, 124321.
76. Muthukrishnan, S.; Kua, H. W.; Yu, L. N.; Chung, J. K. H. Fresh properties of cementitious materials containing rice husk ash for construction 3D printing. J. Mater. Civ. Eng. 2020, 32, 04020195.
77. Kordi, M.; Farrokhi, N.; Pech-canul, M. I.; Ahmadikhah, A. Rice husk at a glance: from agro-industrial to modern applications. Rice. Sci. 2024, 31, 14-32.
78. Arif, E.; Clark, M. W.; Lake, N. Sugar cane bagasse ash from a high efficiency co-generation boiler: applications in cement and mortar production. Constr. Build. Mater. 2016, 128, 287-97.
79. Wu, N.; Ji, T.; Huang, P.; Fu, T.; Zheng, X.; Xu, Q. Use of sugar cane bagasse ash in ultra-high performance concrete (UHPC) as cement replacement. Constr. Build. Mater. 2022, 317, 125881.
80. Subedi, S.; Arce, G. A.; Hassan, M. M.; Barbato, M.; Mohammad, L. N.; Rupnow, T. Feasibility of ECC with high contents of post-processed bagasse ash as partial cement replacement. Constr. Build. Mater. 2022, 319, 126023.
81. Akbar, A.; Farooq, F.; Shafique, M.; Aslam, F.; Alyousef, R.; Alabduljabbar, H. Sugarcane bagasse ash-based engineered geopolymer mortar incorporating propylene fibers. J. Build. Eng. 2021, 33, 101492.
82. Jesus, M.; Teixeira, J.; Alves, J. L.; Pessoa, S.; Guimarães, A. S.; Rangel, B. Potential use of sugarcane bagasse ash in cementitious mortars for 3D printing. In Materials Design and Applications IV; da Silva, L. F. M.; Ed.; Advanced Structured Materials, Vol. 168; Springer International Publishing, 2022; pp 89-103.
83. Xu, Q.; Ji, T.; Gao, S. J.; Yang, Z.; Wu, N. Characteristics and applications of sugar cane bagasse ash waste in cementitious materials. Materials. 2018, 12, 39.
84. Manyà, J. J.; Azuara, M.; Manso, J. A. Biochar production through slow pyrolysis of different biomass materials: seeking the best operating conditions. Biomass. Bioenergy. 2018, 117, 115-23.
85. Muzyka, R.; Misztal, E.; Hrabak, J.; Banks, S. W.; Sajdak, M. Various biomass pyrolysis conditions influence the porosity and pore size distribution of biochar. Energy 2023, 263, 126128.
86. Du, J.; Wang, Y.; Bao, Y.; Sarkar, D.; Meng, W. Valorization of wasted-derived biochar in ultra-high-performance concrete (UHPC): pretreatment, characterization, and environmental benefits. Constr. Build. Mater. 2023, 409, 133839.
87. Liu, Z.; Du, J.; Christodoulatos, C.; Meng, W.; Bao, Y. Recycling off-specification fly ash for producing strain-hardening cementitious composites. J. Mater. Civ. Eng. 2024, 36, 04023531.
88. Piccolo, F.; Andreola, F.; Barbieri, L.; Lancellotti, I. Synthesis and characterization of biochar-based geopolymer materials. Appl. Sci. 2021, 11, 10945.
89. Zhang, C.; Zhu, X.; Li, M.; et al. Enhancing interface adhesion of 3D printable concrete by biochar integration. Cem. Concr. Compos. 2026, 166, 106383.
90. D. Phadtare, P.; R. Kalbande, S. Biochar production technologies from agricultural waste, its utilization in agriculture and current global biochar market: a comprehensive review. Int. J. Environ. Clim. Change. 2022, 12, 1010-31.
91. Dixit, A.; Gupta, S.; Pang, S. D.; Kua, H. W. Waste Valorisation using biochar for cement replacement and internal curing in ultra-high performance concrete. J. Clean. Prod. 2019, 238, 117876.
92. Zhang, Y.; Maierdan, Y.; Guo, T.; Chen, B.; Fang, S.; Zhao, L. Biochar as carbon sequestration material combines with sewage sludge incineration ash to prepare lightweight concrete. Constr. Build. Mater. 2022, 343, 128116.
93. Neve, S.; Du, J.; Barhemat, R.; Meng, W.; Bao, Y.; Sarkar, D. Valorization of vetiver root biochar in eco-friendly reinforced concrete: mechanical, economic, and environmental performance. Material. 2023, 16, 2522.
94. Tang, Y.; Qiu, J. CO2-sequestering ability of lightweight concrete based on reactive magnesia cement and high-dosage biochar aggregate. J. Clean. Prod. 2024, 451, 141922.
95. Dahlbo, H.; Poliakova, V.; Mylläri, V.; Sahimaa, O.; Anderson, R. Recycling potential of post-consumer plastic packaging waste in Finland. Waste. Manag. 2018, 71, 52-61.
96. Noor, T.; Javid, A.; Hussain, A.; et al. Types, sources and management of urban wastes. In Urban Ecology; Elsevier, 2020; pp 239-63.
97. Guo, P.; Wang, Y.; Moghaddamfard, P.; Meng, W.; Wu, S.; Bao, Y. Artificial intelligence-empowered collection and characterization of microplastics: a review. J. Hazard. Mater. 2024, 471, 134405.
98. Oyelere, A.; Wu, S.; Hsiao, K.; et al. Evaluation of cracking susceptibility of asphalt binders modified with recycled high-density polyethylene and polypropylene microplastics. Constr. Build. Mater. 2024, 438, 136811.
99. Tian, N.; Tataranni, P.; Sangiorgi, C. Hydrogen peroxide activation of waste tire crumb rubber for improving compatibility with bitumen: laboratory and molecular dynamics insights. J. Road. Eng. 2025, 5, 244-60.
100. Su, Z.; Zhou, T.; Xie, S.; et al. Enhancing compatibility of crumb rubber in modified asphalt using green desulfurization for sustainable waste tire recycling. Constr. Build. Mater. 2025, 490, 142556.
101. Huang, Y.; Long, K.; Qu, C.; Yan, C.; Ai, C.; Zhou, S. Evaluation of terminal blend rubberized asphalt incorporating high crumb rubber content. Case. Stud. Constr. Mater. 2025, 22, e04285.
102. Panda, S.; Nanda, A.; Panigrahi, S. K. Potential utilization of waste plastic in sustainable geopolymer concrete production: a review. J. Environ. Manage. 2024, 366, 121705.
103. Daniel Oosthuizen, J.; John Babafemi, A.; Shaun Walls, R. 3D-printed recycled plastic eco-aggregate (Resin8) concrete. Constr. Build. Mater. 2023, 408, 133712.
104. Nayanathara Thathsarani Pilapitiya, P.; Ratnayake, A. S. The world of plastic waste: a review. Clean. Mater. 2024, 11, 100220.
105. Lyu, X.; Ahmed, T.; Elchalakani, M.; Yang, B.; Youssf, O. Influence of crumbed rubber inclusion on spalling, microstructure, and mechanical behaviour of UHPC exposed to elevated temperatures. Constr. Build. Mater. 2023, 403, 133174.
106. Chen, Z.; Liang, Y.; Lin, Y.; Cai, J. Recycling of waste tire rubber as aggregate in impact-resistant engineered cementitious composites. Constr. Build. Mater. 2022, 359, 129477.
107. Aly, A. M.; El-feky, M.; Kohail, M.; Nasr, E. A. Performance of geopolymer concrete containing recycled rubber. Constr. Build. Mater. 2019, 207, 136-44.
108. Sambucci, M.; Biblioteca, I.; Valente, M. Life cycle assessment (LCA) of 3D concrete printing and casting processes for cementitious materials incorporating ground waste tire rubber. Recycling 2023, 8, 15.
109. Liu, L.; Cai, G.; Zhang, J.; Liu, X.; Liu, K. Evaluation of engineering properties and environmental effect of recycled waste tire-sand/soil in geotechnical engineering: a compressive review. Renew. Sustain. Energy. Rev. 2020, 126, 109831.
110. Wiśniewska, P.; Wang, S.; Formela, K. Waste tire rubber devulcanization technologies: state-of-the-art, limitations and future perspectives. Waste. Manag. 2022, 150, 174-84.
111. Guo, S.; Dai, Q.; Si, R.; Sun, X.; Lu, C. Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire. J. Clean. Prod. 2017, 148, 681-9.
112. Bakhtiari Ghaleh, M.; Asadi, P.; Eftekhar, M. R. Enhancing mechanical performance of waste tire concrete with surface double pre-coating by resin and micro-silica. J. Build. Eng. 2022, 50, 104084.
113. Shi, H. S.; Kan, L. L. Leaching behavior of heavy metals from municipal solid wastes incineration (MSWI) fly ash used in concrete. J. Hazard. Mater. 2009, 164, 750-4.
114. Lv, Y.; Yang, L.; Wang, J.; et al. Performance of ultra-high-performance concrete incorporating municipal solid waste incineration fly ash. Case. Stud. Constr. Mater. 2022, 17, e01155.
115. Cheng, Y.; Huang, X. Application of municipal solid waste incineration bottom ash into engineered cementitious composites. Int. J. Pavement. Res. Technol. 2021, 15, 1106-17.
116. Niu, M.; Zhang, P.; Guo, J.; Wang, J. Effect of municipal solid waste incineration fly ash on the mechanical properties and microstructure of geopolymer concrete. Gels 2022, 8, 341.
117. Rehman, A. U.; Lee, S.; Kim, J. Use of municipal solid waste incineration ash in 3D printable concrete. Process. Saf. Environ. Prot. 2020, 142, 219-28.
118. Tsui, T.; Wong, J. W. C. A critical review: emerging bioeconomy and waste-to-energy technologies for sustainable municipal solid waste management. Waste. Dispos. Sustain. Energy. 2019, 1, 151-67.
119. Gastaldi, D.; Canonico, F.; Capelli, L.; Buzzi, L.; Boccaleri, E.; Irico, S. An investigation on the recycling of hydrated cement from concrete demolition waste. Cem. Concr. Compos. 2015, 61, 29-35.
120. Asensio, E.; Medina, C.; Frías, M.; De Rojas, M. I. S. Characterization of ceramic‐based construction and demolition waste: use as pozzolan in cements. J. Am. Ceram. Soc. 2016, 99, 4121-7.
121. Mohammed, M. S.; Elkady, H.; Abdel- Gawwad, H. A. Utilization of construction and demolition waste and synthetic aggregates. J. Build. Eng. 2021, 43, 103207.
122. Ouyang, X.; Li, X.; Li, J.; et al. Multiscale microstructure and reactivity evolution of recycled concrete fines under gas-solid carbonation. Cem. Concr. Compos. 2025, 157, 105903.
123. Zhang, H.; Ji, T.; Zeng, X.; Yang, Z.; Lin, X.; Liang, Y. Mechanical behavior of ultra-high performance concrete (UHPC) using recycled fine aggregate cured under different conditions and the mechanism based on integrated microstructural parameters. Constr. Build. Mater. 2018, 192, 489-507.
124. Zhu, P.; Hua, M.; Liu, H.; Wang, X.; Chen, C. Interfacial evaluation of geopolymer mortar prepared with recycled geopolymer fine aggregates. Constr. Build. Mater. 2020, 259, 119849.
125. Zhang, H.; Xiao, J.; Duan, Z.; Zou, S.; Xia, B. Effects of printing paths and recycled fines on drying shrinkage of 3D printed mortar. Constr. Build. Mater. 2022, 342, 128007.
126. Soto-paz, J.; Arroyo, O.; Torres-guevara, L. E.; Parra-orobio, B. A.; Casallas-ojeda, M. The circular economy in the construction and demolition waste management: a comparative analysis in emerging and developed countries. J. Build. Eng. 2023, 78, 107724.
127. Wu, Y.; Mehdizadeh, H.; Mo, K. H.; Ling, T. High-temperature CO2 for accelerating the carbonation of recycled concrete fines. J. Build. Eng. 2022, 52, 104526.
128. Xu, L.; Wang, J.; Li, K.; et al. A systematic review of factors affecting properties of thermal-activated recycled cement. Resour. Conserv. Recycl. 2022, 185, 106432.
129. Korat, A.; Amin, M.; Tahwia, A. M. A comprehensive assessment of ceramic wastes in ultra-high-performance concrete. Innov. Infrastruct. Solut. 2025, 10, 28.
130. Xiong, Y.; Yang, Y.; Fang, S.; Wu, D.; Tang, Y. Experimental research on compressive and shrinkage properties of ECC containing ceramic wastes under different curing conditions. Front. Mater. 2021, 8, 727273.
131. Aly, S. T.; Kanaan, D. M.; El-dieb, A. S.; Abu-eishah, S. I. Properties of Ceramic Waste Powder-Based Geopolymer Concrete. In International Congress on Polymers in Concrete (ICPIC 2018); Taha, M. M. R.; Ed.; Springer International Publishing, 2018; pp 429-35.
132. Ye, C.; Xu, J.; Lacidogna, G. Fracture behavior of 3D printed geopolymer concrete containing waste ceramic. Cem. Concr. Compos. 2025, 163, 106193.
133. Wang, C.; Wang, S.; Li, X.; et al. Phase composition, microstructure, and properties of ceramic tile prepared using ceramic polishing waste as raw material. Int. J. Appl. Ceram. Technol. 2021, 18, 1052-62.
134. Mandal, A.; Rajput, S. P. S. Advances in alkali-activation of ceramic waste-based pozzolana in concrete and mortar: a comprehensive review. Waste. Biomass. Valor. 2025, 16, 3309-30.
135. Shah, H. A.; Meng, W. Enhancement of recycled concrete aggregate through slag-coated carbonation. Cem. Concr. Compos. 2025, 157, 105912.
136. Spaeth, V.; Djerbi Tegguer, A. Improvement of recycled concrete aggregate properties by polymer treatments. Int. J. Sustain. Built. Environ. 2013, 2, 143-52.
137. Zhong, C.; Tian, P.; Long, Y.; Zhou, J.; Peng, K.; Yuan, C. Effect of composite impregnation on properties of recycled coarse aggregate and recycled aggregate concrete. Buildings 2022, 12, 1035.
138. Yu, L.; Wu, R. Using graphene oxide to improve the properties of ultra-high-performance concrete with fine recycled aggregate. Constr. Build. Mater. 2020, 259, 120657.
139. Bai, M.; Xiao, J.; Gao, Y.; Ding, T. Pore structure characteristics and mechanical property of engineered cementitious composites (ECC) incorporating recycled sand. Constr. Build. Mater. 2023, 408, 133721.
140. Skariah Thomas, B.; Yang, J.; Bahurudeen, A.; et al. Geopolymer concrete incorporating recycled aggregates: a comprehensive review. Clean. Mater. 2022, 3, 100056.
141. Wu, Y.; Liu, C.; Liu, H.; et al. Study on the rheology and buildability of 3D printed concrete with recycled coarse aggregates. J. Build. Eng. 2021, 42, 103030.
142. Li, X.; Wang, J.; Bao, Y.; Chen, G. Cyclic behavior of damaged reinforced concrete columns repaired with high-performance fiber-reinforced cementitious composite. Eng. Struct. 2017, 136, 26-35.
143. Shaikuthali, S. A.; Mannan, M. A.; Dawood, E. T.; Teo, D. C. L.; Ahmadi, R.; Ismail, I. Workability and compressive strength properties of normal weight concrete using high dosage of fly ash as cement replacement. J. Build. Rehabil. 2019, 4, 26.
144. Aly, S. T.; El-dieb, A. S.; Taha, M. R. Effect of high-volume ceramic waste powder as partial cement replacement on fresh and compressive strength of self-compacting concrete. J. Mater. Civ. Eng. 2019, 31, 04018374.
145. Bawab, J.; Khatib, J.; Kenai, S.; Sonebi, M. A review on cementitious materials including municipal solid waste incineration bottom ash (MSWI-BA) as aggregates. Buildings 2021, 11, 179.
146. Lemougna, P. N.; Nzeukou, A.; Aziwo, B.; et al. Effect of slag on the improvement of setting time and compressive strength of low reactive volcanic ash geopolymers synthetized at room temperature. Mater. Chem. Phys. 2020, 239, 122077.
147. Barbhuiya, S.; Kanavaris, F.; Ashish, D. K.; Tu, W.; Das, B. B.; Adak, D. Ground waste glass as a supplementary cementitious material for concrete: sustainable utilization, material performance and environmental considerations. J. Sustain. Cem. Based. Mater. 2025, 14, 1221-49.
148. Lee, H. S.; Wang, X. Y.; Zhang, L. N.; Koh, K. T. Analysis of the optimum usage of slag for the compressive strength of concrete. Materials. 2015, 8, 1213-29.
149. Jain, P.; Gupta, R.; Chaudhary, S. A literature review on the effect of using ceramic waste as supplementary cementitious material in cement composites on workability and compressive strength. Mater. Today. Proc. 2022, 65, 871-6.
150. Zhang, T.; Zhao, Z. Optimal use of MSWI bottom ash in concrete. Int. J. Concr. Struct. Mater. 2014, 8, 173-82.
151. Islam, M.; Islam, S. Effect of fly ash on rapid chloride penetration and strength of concrete. In International Conference on Environmental Technology and Construction Engineering for Sustainable Development (ICETCESD-2011), March 10-12, 2011, SUST, Sylhet, Bangladesh. https://www.researchgate.net/profile/Md-Islam-258/publication/360257865_Effect_of_Fly_Ash_on_Rapid_Chloride_Penetration_and_Strength_of_Concrete/links/626bb3fa8e7e1e5d5fa3956c/Effect-of-Fly-Ash-on-Rapid-Chloride-Penetration-and-Strength-of-Concrete.pdf (accessed 2026-03-11).
152. Tong, G.; Pang, J.; Shen, J.; et al. Response tests on the effects of particle size of waste glass sand and glass powder on the mechanical and durability performance of concrete. Sci. Rep. 2024, 14, 25445.
153. Ke, G.; Li, W.; Li, R.; Li, Y.; Wang, G. Mitigation effect of waste glass powders on alkali-silica reaction (ASR) expansion in cementitious composite. Int. J. Concr. Struct. Mater. 2018, 12, 67.
154. Tokareva, A.; Waldmann, D. Durability assessment of cement mortars with recycled ceramic powders. Materials. 2025, 18, 4420.
155. Cho, B. H.; Nam, B. H.; An, J.; Youn, H. Municipal solid waste incineration (MSWI) ashes as construction materials-a review. Materials. 2020, 13, 3143.
156. Carsana, M.; Gastaldi, M.; Lollini, F.; Redaelli, E.; Bertolini, L. Improving durability of reinforced concrete structures by recycling wet‐ground MSWI bottom ash. Mater. Corros. 2016, 67, 573-82.
157. Mangat, P. S.; Khatib, J. M. Influence of fly ash, silica fume, and slag on sulfate resistance of concrete. ACI. Mater. J. 1993, 92, 542-52.
158. Deng, Y.; Wang, X.; Zhao, J.; Liu, H.; Chen, L. Enhancing sulfate resistance of cement-stabilized recycled aggregate with steel slag: Optimized mix design and mechanistic insights. Case. Stud. Constr. Mater. 2025, 23, e04904.
159. Tang, Z.; Li, W.; Ke, G.; Zhou, J. L.; Tam, V. W. Sulfate attack resistance of sustainable concrete incorporating various industrial solid wastes. J. Clean. Prod. 2019, 218, 810-22.
160. Du, Y.; Yang, W.; Ge, Y.; Wang, S.; Liu, P. Thermal conductivity of cement paste containing waste glass powder, metakaolin and limestone filler as supplementary cementitious material. J. Clean. Prod. 2021, 287, 125018.
161. Al-jamaily, N. M. S.; Atiea, H. M.; Jabal, Q. A.; Mahdi, W. H.; Alasadi, L. A. Concrete’s fire resistance improvement with waste glass and ceramic aggregates. Pollack 2024, 19, 95-9.
162. Bekzhanova, Z.; Memon, S. A.; Kim, J. R. Self-Sensing cementitious composites: review and perspective. Nanomaterials. 2021, 11, 2355.
163. Baalamurugan, J.; Kumar, V. G.; Chandrasekaran, S.; et al. Recycling of steel slag aggregates for the development of high density concrete: Alternative & environment-friendly radiation shielding composite. Compos. Part. B. Eng. 2021, 216, 108885.
164. Adessina, A.; Fraj, A. B.; Barthélémy, J. Improvement of the compressive strength of recycled aggregate concretes and relative effects on durability properties. Constr. Build. Mater. 2023, 384, 131447.
165. Harrison, E.; Berenjian, A.; Seifan, M. Recycling of waste glass as aggregate in cement-based materials. Environ. Sci. Ecotechnol. 2020, 4, 100064.
166. Moolchandani, K.; Sharma, A. State-of-the-art review on the influence of crumb rubber on the strength, durability, and morphological properties of concrete. Sci. Eng. Compos. Mater. 2025, 32, 20250060.
167. Meshram, S.; Raut, S.; Ansari, K.; et al. Waste slags as sustainable construction materials: a compressive review on physico mechanical properties. J. Mater. Res. Technol. 2023, 23, 5821-45.
168. Etxeberria, M.; Vázquez, E.; Marí, A.; Barra, M. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cem. Concr. Res. 2007, 37, 735-42.
169. Shayan, A.; Xu, A. Performance and properties of Struct. Concr. made with recycled concrete aggregate. ACI. Mater. J. 2003, 100, 371-80.
170. Safiuddin, M.; Salam, M.; Jumaat, M. Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete. Arch. Civ. Mech. Eng. 2011, 11, 1023-41.
171. Humagain, S.; Bista, A.; Sarker, P. Effect of using recycled returned concrete aggregate on the strength and durability aspects of concrete. In Eighth International Conference on Durability of Concrete Structures; Purdue University, 2025.
172. Bhat, K. R.; Dumre, G.; Gyawali, T. R. Transforming waste into strength: evaluating properties of concrete with waste glass substitution. Clean. Waste. Syst. 2024, 9, 100179.
173. Azhagarsamy, S.; Pannirselvam, N.; Vanjinathan, J.; Premkumar, R.; Vijayakumar, D. Optimizing mechanical and microstructural properties of concrete with steel slag aggregate using response surface methodology. Results. Eng. 2025, 27, 106885.
174. Ahmad, J.; Zhou, Z.; Majdi, A.; Alqurashi, M.; Deifalla, A. F. Overview of concrete performance made with waste rubber tires: a step toward sustainable concrete. Materials. 2022, 15, 5518.
175. Alibeigibeni, A.; Stochino, F.; Zucca, M.; Gayarre, F. L. Enhancing concrete sustainability: a critical review of the performance of recycled concrete aggregates (RCAs) in Struct. Concr. Buildings 2025, 15, 1361.
176. Junior, G. A. F.; Leite, J. C. T.; Mendez, G. D. P.; Haddad, A. N.; Silva, J. A. F.; Da Costa, B. B. F. A Review of the characteristics of recycled aggregates and the mechanical properties of concrete produced by replacing natural coarse aggregates with recycled ones - fostering resilient and sustainable infrastructures. Infrastructures 2025, 10, 213.
177. Ibrahim, I. K.; Rady, M.; Tawfik, N. M.; Kassem, M.; Mahfouz, S. Y. Enhancing strength and sustainability of concrete with steel slag aggregate. Sci. Rep. 2025, 15, 17068.
178. Semmana, O.; Rihan, M. A. M.; Barrie, Z. M.; Daniel, C.; Abdalla, T. A. A systematic review of the strength, durability, and microstructure properties of concrete incorporating glass powder. Eng. Rep. 2025, 7, e70002.
179. Nedeljković, M.; Visser, J.; Šavija, B.; Valcke, S.; Schlangen, E. Use of fine recycled concrete aggregates in concrete: A critical review. J. Build. Eng. 2021, 38, 102196.
180. Cantero, B.; Bravo, M.; De Brito, J.; Sáez Del Bosque, I. F.; Medina, C. Assessment of the permeability to aggressive agents of concrete with recycled cement and mixed recycled aggregate. Appl. Sci. 2021, 11, 3856.
181. Goli, A.; Emadi, H.; Sadeghi, P. Investigating the effect of using steel slag on abrasion resistance of roller-compacted concrete pavement. Innov. Infrastruct. Solut. 2022, 7, 297.
182. Fan, X.; Wang, Q.; Weng, Y.; et al. Effect of nanorubber on the properties of silicate cement paste. Constr. Build. Mater. 2025, 467, 140352.
183. Abdelaleem, A.; Moawad, M.; El-emam, H.; Salim, H.; Sallam, H. Long term behavior of rubberized concrete under static and dynamic loads. Case. Stud. Constr. Mater. 2024, 20, e03087.
184. Křížová, K.; Bubeník, J.; Sedlmajer, M. Use of lightweight sintered fly ash aggregates in concrete at high temperatures. Buildings 2022, 12, 2090.
185. Wang, J.; Du, B. Experimental studies of thermal and acoustic properties of recycled aggregate crumb rubber concrete. J. Build. Eng. 2020, 32, 101836.
186. Wang, Y.; Wang, Y. Experimental study and theoretical modeling of effective thermal conductivity of waste tire rubber composite concrete under different relative humidity. J. Build. Eng. 2025, 111, 113605.
187. Chen, M.; Chen, F.; Meng, S. Research on Light-Reflecting Pavement Performance of Glass-Asphalt Concrete. In 2012 2nd International Conference on Remote Sensing, Environment and Transportation Engineering (RSETE), Nanjing, Jiangsu, China, June 1-3, 2012; IEEE, 2012, pp 1-4.
188. Mammeri, A.; Vaillancourt, M.; Shamsaei, M. Experimental and numerical investigation of using waste glass aggregates in asphalt pavement to mitigate urban heat islands. Clean. Techn. Environ. Policy. 2023, 25, 1935-48.
189. Wang, H.; Qian, J.; Zhang, H.; Nan, X.; Chen, G.; Li, X. Exploring skid resistance over time: steel slag as a pavement aggregate - comparative study and morphological analysis. J. Clean. Prod. 2024, 464, 142779.
190. Norambuena-contreras, J.; Gonzalez, A.; Concha, J.; Gonzalez-torre, I.; Schlangen, E. Effect of metallic waste addition on the electrical, thermophysical and microwave crack-healing properties of asphalt mixtures. Constr. Build. Mater. 2018, 187, 1039-50.
191. Arif, R.; Khitab, A.; Kırgız, M. S.; et al. Experimental analysis on partial replacement of cement with brick powder in concrete. Case. Stud. Constr. Mater. 2021, 15, e00749.
192. Belmouhoub, A.; Abdelouahed, A.; Noui, A. Experimental and factorial design of the mechanical and physical properties of concrete containing waste rubber powder. Res. Eng. Struct. Mat. 2023, 10, 461-80.
193. Alzlfawi, A.; Alattyih, W.; Naqash, M. T.; Ahmad, J. Properties of sustainable concrete containing demolished concrete and tile waste powders. Sci. Rep. 2025, 16, 787.
194. El-dieb, A. S.; Kanaan, D. M. Ceramic waste powder an alternative cement replacement - characterization and evaluation. Sustain. Mater. Technol. 2018, 17, e00063.
195. Singh, A.; Arora, S.; Sharma, V.; Bhardwaj, B. Workability retention and strength development of self-compacting recycled aggregate concrete using ultrafine recycled powders and silica fume. J. Hazard. Toxic. Radioact. Waste. 2019, 23, 04019016.
196. Cong, L.; Jialin, L.; Jing, C.; Hailun, W.; Dong, L. Study on the application of recycled fine powder in ready-mixed concrete. MATEC. Web. Conf. 2019, 278, 01010.
197. Subaşı, S.; Öztürk, H.; Emiroğlu, M. Utilizing of waste ceramic powders as filler material in self-consolidating concrete. Constr. Build. Mater. 2017, 149, 567-74.
198. Paswan, R. Experimental study on design mix concrete using waste plastic bottle fibers. Int. Res. J. Modern. Eng. Technol. Sci. 2023, 5, 1502-10.
199. Zhang, P.; Wang, X.; Wang, J.; Zhang, T. Workability and durability of concrete incorporating waste tire rubber: a review. J. Renew. Mater. 2023, 11, 745-76.
200. Awoyera, P. O.; Adesina, A.; Gobinath, R. Role of recycling fine materials as filler for improving performance of concrete - a review. Aust. J. Civ. Eng. 2019, 17, 85-95.
201. Chandni, T.; Anand, K. Utilization of recycled waste as filler in foam concrete. J. Build. Eng. 2018, 19, 154-60.
202. Gesoglu, M.; Güneyisi, E.; Hansu, O.; Etli, S.; Alhassan, M. Mechanical and fracture characteristics of self-compacting concretes containing different percentage of plastic waste powder. Constr. Build. Mater. 2017, 140, 562-9.
203. Ganjian, E.; Khorami, M.; Maghsoudi, A. A. Scrap-tyre-rubber replacement for aggregate and filler in concrete. Constr. Build. Mater. 2009, 23, 1828-36.
204. Han, T.; Aponte, D.; Valls, S.; Bizinotto, M. B. Impact of recycled concrete and ceramic fillers on the performance of cementitious systems: microstructural, mechanical, and durability aspects. Recycling 2025, 10, 108.
205. Meena, R. V.; Jain, J. K.; Chouhan, H. S.; Beniwal, A. S. Use of waste ceramics to produce sustainable concrete: a review. Clean. Mater. 2022, 4, 100085.
206. Sičáková, A.; Špak, M. The effect of a high amount of micro-fillers on the long-term properties of concrete. Materials. 2019, 12, 3421.
207. Wu, H.; Wang, C.; Ma, Z. Drying shrinkage, mechanical and transport properties of sustainable mortar with both recycled aggregate and powder from concrete waste. J. Build. Eng. 2022, 49, 104048.
208. Holland, R.; Du, J.; Obeidah, A.; Meng, W.; Nassif, H. Early-age crack-free ultra-high-performance concrete under restrained ring test for large-scale production as an overlay. Constr. Build. Mater. 2023, 409, 133949.
209. Wijesinghe, K. A. P.; Lanarolle, G.; Gunasekara, C.; Law, D. W.; Hidallana-gamage, H. D.; Wang, L. Thermal and acoustic performance of solid waste incorporated cement based composites: an analytical review. Arch. Civ. Mech. Eng. 2025, 25, 106.
210. Horsakulthai, V. Effect of recycled concrete powder on strength, electrical resistivity, and water absorption of self-compacting mortars. Case. Stud. Constr. Mater. 2021, 15, e00725.
211. Kaewunruen, S.; Meesit, R. Sensitivity of crumb rubber particle sizes on electrical resistance of rubberised concrete. Cogent. Eng. 2016, 3, 1126937.
212. Binici, H. Effect of crushed ceramic and basaltic pumice as fine aggregates on concrete mortars properties. Constr. Build. Mater. 2007, 21, 1191-7.
213. Boussaq, C.; Samaouali, A.; Belarouf, S.; et al. Experimental analysis of thermal conductivity and volumetric heat capacity in concrete incorporating HDPE waste plastic powder as a function of temperature. Civ. Environ. Eng. 2025, 21, 591-604.
214. Ghorbel, E.; Omary, S.; Karrech, A. Recovered tire-derived aggregates for thermally insulating lightweight mortars. Materials. 2025, 18, 1849.
215. Wu, D.; Mao, Z.; Zhang, J.; Li, S.; Ma, Q. Performance evaluation of concrete with waste glass after elevated temperatures. Constr. Build. Mater. 2023, 368, 130486.
216. Du, J.; Mahjoubi, S.; Bao, Y.; Banthia, N.; Meng, W. Modeling mixing kinetics for large-scale production of ultra-high-performance concrete: effects of temperature, volume, and mixing method. Constr. Build. Mater. 2023, 397, 132439.
217. Tian, L.; Qiu, L.; Liu, Y. Fabrication of integrally hydrophobic self-compacting rubberized mortar with excellent waterproof ability, corrosion resistance and stable mechanical properties. Constr. Build. Mater. 2021, 304, 124684.
218. Meng, W.; Khayat, K. H. Improving flexural performance of ultra-high-performance concrete by rheology control of suspending mortar. Compos. Part. B. Eng. 2017, 117, 26-34.
219. Khayat, K. H.; Meng, W.; Vallurupalli, K.; Teng, L. Rheological properties of ultra-high-performance concrete - an overview. Cem. Concr. Res. 2019, 124, 105828.
220. Rusheng, Q.; Yunsheng, Z.; Yu, Z.; Cheng, L.; Lin, Y.; Deyu, K. Effects of aqueous-phase speciation on Portland cement and supplementary cementitious materials as reflected using zeta potential of powder suspensions. Constr. Build. Mater. 2022, 345, 128258.
221. Meng, W.; Kumar, A.; Khayat, K. H. Effect of silica fume and slump-retaining polycarboxylate-based dispersant on the development of properties of portland cement paste. Cem. Concr. Compos. 2019, 99, 181-90.
222. Meng, W.; Lunkad, P.; Kumar, A.; Khayat, K. Influence of silica fume and polycarboxylate ether dispersant on hydration mechanisms of cement. J. Phys. Chem. C. 2016, 120, 26814-23.
223. Huang, J.; Xu, W.; Chen, H.; Xu, G. Elucidating how ionic adsorption controls the rheological behavior of quartz and cement-quartz paste. Constr. Build. Mater. 2021, 272, 121957.
224. Li, M.; Pan, L.; Li, J.; Xiong, C. Competitive adsorption and interaction between sodium alginate and polycarboxylate superplasticizer in fresh cement paste. Colloids. Surf. A:. Physicochem. Eng. Asp. 2020, 586, 124249.
225. Mehdizadeh, H.; Shao, X.; Mo, K. H.; Ling, T. Enhancement of early age cementitious properties of yellow phosphorus slag via CO2 aqueous carbonation. Cem. Concr. Compos. 2022, 133, 104702.
226. Meng, W.; Khayat, K. H. Effect of graphite nanoplatelets and carbon nanofibers on rheology, hydration, shrinkage, mechanical properties, and microstructure of UHPC. Cem. Concr. Res. 2018, 105, 64-71.
227. Teng, L.; Meng, W.; Khayat, K. H. Rheology control of ultra-high-performance concrete made with different fiber contents. Cem. Concr. Res. 2020, 138, 106222.
228. Jhatial, A. A.; Nováková, I.; Gjerløw, E. A review on emerging cementitious materials, reactivity evaluation and treatment methods. Buildings 2023, 13, 526.
229. Ahmad, M. R.; Fernàndez-jimenez, A.; Chen, B.; Leng, Z.; Dai, J. Low-carbon cementitious materials: Scale-up potential, environmental impact and barriers. Constr. Build. Mater. 2024, 455, 139087.
230. Zhou, Z.; Sofi, M.; Liu, J.; Li, S.; Zhong, A.; Mendis, P. Nano-CSH modified high volume fly ash concrete: Early-age properties and environmental impact analysis. J. Clean. Prod. 2021, 286, 124924.
231. Dong, S.; Meng, W.; Wang, D.; et al. Principle and implementation of incorporating nanomaterials to develop ultrahigh-performance concrete with low content of steel fibers. J. Mater. Civ. Eng. 2023, 35, 04023139.
232. Xu, M.; Bao, Y.; Wu, K.; et al. Influence of TiO2 incorporation methods on NOx abatement in engineered cementitious composites. Constr. Build. Mater. 2019, 221, 375-83.
233. Li, C.; Zhang, X.; Cao, X.; Yu, Y. Sustainable performance and interfacial characteristics of fully recycled concrete with combined recycled concrete, brick, and ceramic aggregates. Sustainability 2025, 17, 10503.
234. Meng, W.; Khayat, K. Effects of saturated lightweight sand content on key characteristics of ultra-high-performance concrete. Cem. Concr. Res. 2017, 101, 46-54.
235. Lyu, Z.; Shen, A.; Meng, W. Properties, mechanism, and optimization of superabsorbent polymers and basalt fibers modified cementitious composite. Constr. Build. Mater. 2021, 276, 122212.
236. Xu, M.; Bao, Y.; Wu, K.; Shi, H.; Guo, X.; Li, V. C. Multiscale investigation of tensile properties of a TiO2-doped engineered cementitious composite. Constr. Build. Mater. 2019, 209, 485-91.
237. Zia, A.; Pu, Z.; Holly, I.; Umar, T.; Tariq, M. A. U. R.; Sufian, M. A comprehensive review of incorporating steel fibers of waste tires in cement composites and its applications. Materials. 2022, 15, 7420.
238. Meng, W.; Khayat, K. H. Mechanical properties of ultra-high-performance concrete enhanced with graphite nanoplatelets and carbon nanofibers. Compos. Part. B. Eng. 2016, 107, 113-22.
239. Vallurupalli, K.; Meng, W.; Liu, J.; Khayat, K. H. Effect of graphene oxide on rheology, hydration and strength development of cement paste. Constr. Build. Mater. 2020, 265, 120311.
240. Wang, Y.; Goodman, S.; Bao, Y.; Meng, W. Morphological, microstructural, and mechanical properties of highly-ordered C-S-H regulated by cellulose nanocrystals (CNCs). Cem. Concr. Compos. 2023, 143, 105276.
241. Lyu, Z.; Shen, A.; Wang, W.; Lin, S.; Guo, Y.; Meng, W. Salt frost resistance and micro characteristics of polynary blended concrete using in frost areas. Cold. Reg. Sci. Technol. 2021, 191, 103374.
242. Matsumoto, H.; Takaoka, M. Formation of Friedel’s salt in simulated municipal solid waste incineration bottom ash. J. Mater. Cycles. Waste. Manag. 2021, 23, 1374-82.
243. Liu, Z.; Shi, Q.; Bao, Y.; Meng, X.; Meng, W. Arsenate removal using titanium dioxide-doped cementitious composites: mixture design, mechanisms, and simulated sewer application. Sci. Total. Environ. 2023, 854, 158754.
244. Liu, Z.; Du, J.; Meng, W. Achieving low-carbon cementitious materials with high mechanical properties using CaCO3 suspension produced by CO2 sequestration. J. Clean. Prod. 2022, 373, 133546.
245. Fan, L.; Meng, W.; Teng, L.; Khayat, K. H. Effects of lightweight sand and steel fiber contents on the corrosion performance of steel rebar embedded in UHPC. Constr. Build. Mater. 2020, 238, 117709.
246. Liu, Z.; Shi, C.; Shi, Q.; Tan, X.; Meng, W. Recycling waste glass aggregate in concrete: mitigation of alkali-silica reaction (ASR) by carbonation curing. J. Clean. Prod. 2022, 370, 133545.
247. Saha, A. K.; Sarker, P. K. Potential alkali silica reaction expansion mitigation of ferronickel slag aggregate by fly ash. Struct. Concr. 2018, 19, 1376-86.
248. Rodrigue, A.; Duchesne, J.; Fournier, B.; Champagne, M.; Bissonnette, B. Alkali-silica reaction in alkali-activated combined slag and fly ash concretes: the tempering effect of fly ash on expansion and cracking. Constr. Build. Mater. 2020, 251, 118968.
249. Meng, W.; Yao, Y.; Mobasher, B.; Khayat, K. H. Effects of loading rate and notch-to-depth ratio of notched beams on flexural performance of ultra-high-performance concrete. Cem. Concr. Compos. 2017, 83, 349-59.
250. Meng, W.; Khayat, K. H.; Bao, Y. Flexural behaviors of fiber-reinforced polymer fabric reinforced ultra-high-performance concrete panels. Cem. Concr. Compos. 2018, 93, 43-53.
251. Meng, W.; Khayat, K. H. Experimental and numerical studies on flexural behavior of ultrahigh-performance concrete panels reinforced with embedded glass fiber-reinforced polymer grids. Transp. Res. Rec. J. Transp. Res. Board. 2016, 2592, 38-44.
252. Gonen, T. Freezing-thawing and impact resistance of concretes containing waste crumb rubbers. Constr. Build. Mater. 2018, 177, 436-42.
253. Ramachandran, K.; Vijayan, P.; Murali, G.; Vatin, N. I. A review on principles, theories and materials for self sensing concrete for structural applications. Materials 2022, 15, 3831.
254. Al-dahawi, A.; Sarwary, M. H.; Öztürk, O.; et al. Electrical percolation threshold of cementitious composites possessing self-sensing functionality incorporating different carbon-based materials. Smart. Mater. Struct. 2016, 25, 105005.
255. Rovnaník, P.; Kusák, I.; Bayer, P.; Schmid, P.; Fiala, L. Electrical and self-sensing properties of alkali-activated slag composite with graphite filler. Materials 2019, 12, 105005.
256. Segura, I.; Faneca, G.; Torrents, J. M.; Aguado, A. Self-sensing concrete made from recycled carbon fibres. Smart. Mater. Struct. 2019, 28, 105045.
257. Wang, Y.; Halton, E.; Bao, Y.; Meng, W. Multifunctional high-performance cement aerogels for CO2 sequestration and thermal insulation. Cem. Concr. Compos. 2025, 163, 106195.
258. Pan, Y.; Chen, G.; Huang, C. Thermodynamic analysis of thermal stability in recycled concrete derived from building solid waste. Int. J. Heat. Technol. 2024, 42, 141-52.
259. Lou, J.; He, C.; Shui, A.; Yu, H. Enhanced sound absorption performance of porous ceramics with closed-pore structure. Ceram. Int. 2023, 49, 38103-14.
260. Pan, Z.; Tao, Z.; Murphy, T.; Wuhrer, R. High temperature performance of mortars containing fine glass powders. J. Clean. Prod. 2017, 162, 16-26.
261. Rajawat, D.; Siddique, S.; Shrivastava, S.; Chaudhary, S.; Gupta, T. Influence of fine ceramic aggregates on the residual properties of concrete subjected to elevated temperature. Fire. Mater. 2018, 42, 834-42.
262. Ciudad, A.; Lacasta, A.; Haurie, L.; Formosa, J.; Chimenos, J. Improvement of passive fire protection in a gypsum panel by adding inorganic fillers: experiment and theory. Appl. Therm. Eng. 2011, 31, 3971-8.
263. Li, X.; Bao, Y.; Wu, L.; et al. Thermal and mechanical properties of high-performance fiber-reinforced cementitious composites after exposure to high temperatures. Constr. Build. Mater. 2017, 157, 829-38.
264. Li, X.; Bao, Y.; Xue, N.; Chen, G. Bond strength of steel bars embedded in high-performance fiber-reinforced cementitious composite before and after exposure to elevated temperatures. Fire. Saf. J. 2017, 92, 98-106.
265. Li, X.; Xu, Z.; Bao, Y.; Cong, Z. Post-fire seismic behavior of two-bay two-story frames with high-performance fiber-reinforced cementitious composite joints. Eng. Struct. 2019, 183, 150-9.
266. Li, X.; Lu, X.; Qi, J.; Bao, Y. Flexural behavior of fire-damaged concrete beams repaired with strain-hardening cementitious composite. Eng. Struct. 2022, 261, 114305.
267. Odaa, S. A.; Al-hadithi, A. I.; Mansoor, Y. A. Preparation and characterization of nano-waste glass powder. Results. Mater. 2023, 20, 100470.
268. Umeda, J.; Kondoh, K. High-purity amorphous silica originated in rice husks via carboxylic acid leaching process. J. Mater. Sci. 2008, 43, 7084-90.
269. Manivasakan, P.; Rajendran, V.; Rauta, P.; Sahu, B.; Panda, B. Direct synthesis of nano alumina from natural bauxite. Adv. Mater. Res. 2009, 67, 143-8.
270. Uddin, M. N.; Hossain, M. T.; Mahmud, N.; et al. Research and applications of nanoclays: a review. SPE. Polym. 2024, 5, 507-35.
271. Du, J.; Guo, P.; Liu, Z.; Meng, W. Highly thixotropic ultra-high-performance concrete (UHPC) as an overlay. Constr. Build. Mater. 2023, 366, 130130.
272. Du, J.; Guo, P.; Meng, W. Effect of water-based nanoclay and ambient temperature on rheological properties of UHPC pastes. Constr. Build. Mater. 2023, 370, 130733.
273. Zingaretti, D.; Costa, G.; Baciocchi, R. Assessment of accelerated carbonation processes for CO2 storage using alkaline industrial residues. Ind. Eng. Chem. Res. 2013, 53, 9311-24.
274. Vanderzee, S.; Zeman, F. Recovery and carbonation of 100% of calcium in waste concrete fines: experimental results. J. Clean. Prod. 2018, 174, 718-27.
275. Liu, Z.; Meng, W. Fundamental understanding of carbonation curing and durability of carbonation-cured cement-based composites: a review. J. CO2. Util. 2021, 44, 101428.
276. Shah, H. A.; Wang, Y.; Banthia, N.; Meng, W. Enhancing nano-CaCO3 dispersion with cellulose nanocrystals for high-strength low-carbon concrete. Cem. Concr. Compos. 2025, 164, 106227.
277. Shah, H. A.; Meng, W. Improving the mechanical properties of cement paste with carbonated blast furnace slag by tailoring CaCO3 polymorphs and increasing carbonation degree. Cem. Concr. Compos. 2026, 165, 106343.
278. Xu, M.; Yu, J.; Zhou, J.; Bao, Y.; Li, V. C. Effect of curing relative humidity on mechanical properties of engineered cementitious composites at multiple scales. Constr. Build. Mater. 2021, 284, 122834.
279. Zajac, M.; Skocek, J.; Ben Haha, M.; Deja, J. CO2 mineralization methods in cement and concrete industry. Energies 2022, 15, 3597.
280. Meng, W.; Samaranayake, V. A.; Khayat, K. H. Factorial design and optimization of ultra-high-performance concrete with lightweight sand. ACI. Mater. J. 2018, 115, 129-38.
281. Guo, P.; Mahjoubi, S.; Liu, K.; Meng, W.; Bao, Y. Self-updatable AI-assisted design of low-carbon cost-effective ultra-high-performance concrete (UHPC). Case. Stud. Constr. Mater. 2023, 19, e02625.
282. Mahjoubi, S.; Meng, W.; Bao, Y. Auto-tune learning framework for prediction of flowability, mechanical properties, and porosity of ultra-high-performance concrete (UHPC). Appl. Soft. Comput. 2022, 115, 108182.
283. Guo, P.; Moghaddas, S. A.; Liu, Y.; Meng, W.; Li, V. C.; Bao, Y. Applications of machine learning methods for design and characterization of high-performance fiber-reinforced cementitious composite (HPFRCC): a review. J. Sustain. Cem. Based. Mater. 2025, 14, 1726-49.
284. Mahjoubi, S.; Barhemat, R.; Guo, P.; Meng, W.; Bao, Y. Prediction and multi-objective optimization of mechanical, economical, and environmental properties for strain-hardening cementitious composites (SHCC) based on automated machine learning and metaheuristic algorithms. J. Clean. Prod. 2021, 329, 129665.
285. Lavercombe, A.; Huang, X.; Kaewunruen, S. Machine learning application to eco-friendly concrete design for decarbonisation. Sustainability 2021, 13, 13663.
286. Mahjoubi, S.; Meng, W.; Bao, Y. Logic-guided neural network for predicting steel-concrete interfacial behaviors. Expert. Syst. Appl. 2022, 198, 116820.
287. Mahjoubi, S.; Barhemat, R.; Meng, W.; Bao, Y. AI-guided auto-discovery of low-carbon cost-effective ultra-high performance concrete (UHPC). Resour. Conserv. Recycl. 2023, 189, 106741.
288. Guo, P.; Meng, W.; Xu, M.; Li, V. C.; Bao, Y. Predicting mechanical properties of high-performance fiber-reinforced cementitious composites by integrating micromechanics and machine learning. Materials 2021, 14, 3143.
289. Huynh, A. T.; Nguyen, Q. D.; Xuan, Q. L.; et al. A machine learning-assisted numerical predictor for compressive strength of geopolymer concrete based on experimental data and sensitivity analysis. Appl. Sci. 2020, 10, 7726.
290. Bagheri, A.; Cremona, C. Formulation of mix design for 3D printing of geopolymers: a machine learning approach. Mater. Adv. 2020, 1, 720-7.
291. Tong, X.; Jiang, Z.; Xu, Z.; Huang, S.; Meng, W.; Bao, Y. Physicochemical-aware ensemble learning and design of sustainable concrete. J. Sustain. Cem. Based. Mater. 2025, 15, 235-53.
292. Guo, P.; Jiang, Z.; Meng, W.; Bao, Y. Multi-agent collaboration for knowledge-guided data-driven design of ultra-high-performance concrete (UHPC) incorporating solid wastes. Cem. Concr. Compos. 2025, 164, 106230.
293. Guo, P.; Meng, W.; Bao, Y. Knowledge-guided data-driven design of ultra-high-performance geopolymer (UHPG). Cem. Concr. Compos. 2024, 153, 105723.
294. Guo, P.; Meng, W.; Bao, Y. Knowledge graph-guided data-driven design of ultra-high-performance concrete (UHPC) with interpretability and physicochemical reaction discovery capability. Constr. Build. Mater. 2024, 430, 136502.
295. Jiang, Z.; Ran, Y.; Xu, Z.; Huang, S.; Meng, W.; Bao, Y. Automated construction of knowledge graphs for accelerated design and understanding of ultra-high-performance concrete. Autom. Constr. 2026, 181, 106667.
296. Guo, P.; Du, J.; Bao, Y.; Meng, W. Real-time video recognition for assessing plastic viscosity of ultra-high-performance concrete (UHPC). Measurement 2022, 191, 110809.
297. Guo, P.; Meng, X.; Meng, W.; Bao, Y. Automatic assessment of concrete cracks in low-light, overexposed, and blurred images restored using a generative AI approach. Autom. Constr. 2024, 168, 105787.
298. Guo, P.; Meng, W.; Bao, Y. Intelligent characterization of complex cracks in strain-hardening cementitious composites based on generative computer vision. Constr. Build. Mater. 2024, 411, 134812.
299. Guo, P.; Meng, X.; Meng, W.; Bao, Y. Monitoring and automatic characterization of cracks in strain-hardening cementitious composite (SHCC) through intelligent interpretation of photos. Compos. Part. B. Eng. 2022, 242, 110096.
300. Guo, P.; Meng, W.; Bao, Y. Automatic identification and quantification of dense microcracks in high-performance fiber-reinforced cementitious composites through deep learning-based computer vision. Cem. Concr. Res. 2021, 148, 106532.
301. Liu, Z.; Meng, W. CaCO3 coating of off-specification fly ash for upcycling in cementitious materials. Constr. Build. Mater. 2024, 454, 139066.
302. Irfan Khan, M.; Khan, H. U.; Azizli, K.; et al. The pyrolysis kinetics of the conversion of Malaysian kaolin to metakaolin. Appl. Clay. Sci. 2017, 146, 152-61.
303. Farzadnia, N.; Khayat, K. H. Modification of nanomaterials for nanostructured cement-based materials. In Nanotechnology for Civil Infrastructure; Elsevier, 2023; pp 5-37.
304. Du, J.; Wang, Y.; Guo, P.; Meng, W. Tailoring of steel fiber surface by coating cellulose nanocrystal for enhanced flexural properties of UHPC. Cem. Concr. Compos. 2024, 154, 105773.
305. Xiaowei, C.; Sheng, H.; Xiaoyang, G.; Wenhui, D. Crumb waste tire rubber surface modification by plasma polymerization of ethanol and its application on oil-well cement. Appl. Surf. Sci. 2017, 409, 325-42.
306. Li, D.; Xiong, M.; Wang, S.; Chen, X.; Wang, S.; Zeng, Q. Effects of low-temperature plasma treatment on wettability of glass surface: Molecular dynamic simulation and experimental study. Appl. Surf. Sci. 2020, 503, 144257.
307. Guo, W.; Guo, K.; Xing, Y.; Gui, X. A comprehensive review on evolution behavior of particle size distribution during fine grinding process for optimized separation purposes. Miner. Process. Extr. Metall. Rev. 2024, 47, 1-20.
308. Guo, X.; Xiang, D.; Duan, G.; Mou, P. A review of mechanochemistry applications in waste management. Waste. Manag. 2010, 30, 4-10.
309. Noel, N.; Gierth, A. Z.; Helmich, S.; et al. Role of ground blast furnace slag (GBFS) as a micro-milling and micro-aggregating agent in reactivated cement fines (RCFs). J. Sustain. Cem. Based. Mater. 2025, 15, 495-516.
310. Őze, C.; Badacsonyi, N. Makó, É. Mechanochemical activation of waste clay brick powder with addition of waste glass powder and its influence on pozzolanic reactivity. Molecules 2024, 29.
311. Komkova, A.; Habert, G. Optimal supply chain networks for waste materials used in alkali-activated concrete fostering circular economy. Resour. Conserv. Recycl. 2023, 193, 106949.
312. Muthuraja, R.; Pombhejara, C. N.; Ganesan, S.; et al. Assessment and classification of different ashes from waste incinerators in Thailand. Results. Eng. 2024, 24, 103325.
313. Mohammed Al-saudi, S. K.; Géber, R. Production of lightweight geopolymer concrete with foam glass aggregate derived from cathode-ray glass waste. Case. Stud. Constr. Mater. 2024, 21, e03888.
314. Chen, X.; Kroell, N.; Dietl, T.; Feil, A.; Greiff, K. Influence of long-term natural degradation processes on near-infrared spectra and sorting of post-consumer plastics. Waste. Manag. 2021, 136, 213-8.
315. Blasenbauer, D.; Lipp, A. M.; Fellner, J.; Tischberger-Aldrian, A.; Stipanović, H.; Lederer, J. Recovery of plastic packaging from mixed municipal solid waste. A case study from Austria. Waste. Manag. 2024, 180, 9-22.
316. Alsharari, F. Utilization of industrial, agricultural, and construction waste in cementitious composites: a comprehensive review of their impact on concrete properties and sustainable construction practices. Mater. Today. Sustain. 2025, 29, 101080.
317. Alonso, M.; Palacios, M.; Puertas, F. Compatibility between polycarboxylate-based admixtures and blended-cement pastes. Cem. Concr. Compos. 2013, 35, 151-62.
318. Ribeiro, I. S.; Fagundes, D. D. F.; Nierwinski, H. P. Effects of ettringite formation on the stability of cement-treated sediments. Resources 2025, 14, 73.
319. Huang, R.; Xu, L.; Xu, Z.; Zhang, Q.; Wang, J. A review on concrete superplasticizers and their potential applications for enhancing the performance of thermally activated recycled cement. Materials 2024, 17, 4170.
320. Islam, N.; Sandanayake, M.; Muthukumaran, S.; Navaratna, D. Review on sustainable construction and demolition waste management - challenges and research prospects. Sustainability 2024, 16, 3289.
321. Driver, J. G.; Bernard, E.; Patrizio, P.; Fennell, P. S.; Scrivener, K.; Myers, R. J. Global decarbonization potential of CO2 mineralization in concrete materials. Proc. Natl. Acad. Sci. U. S. A. 2024, 121, e2313475121.
322. Ghahsareh, F. M.; Zhang, Q.; Poorghasem, S.; et al. Cradle-to-grave life-cycle assessment of ultra-high-performance concrete (UHPC) beams based on real-time monitoring data. J. Clean. Prod. 2025, 495, 145098.
323. Guo, P.; Wang, Y.; Wu, S.; Meng, W.; Bao, Y. Deep learning-powered efficient characterization and quantification of microplastics. J. Hazard. Mater. 2024, 480, 136241.
324. Feng, L.; Chen, A.; Liu, H. Effect of waste tire rubber particles on concrete abrasion resistance under high-speed water flow. Int. J. Concr. Struct. Mater. 2021, 15, 37.
325. Benjak, P.; Radetić, L.; Presečki, I.; Brnardić, I.; Sakač, N.; Grčić, I. Microplastic-related leachate from recycled rubber tiles: the role of TiO2 protective coating. Surfaces 2024, 7, 786-800.
326. Geng, J.; Huang, Y.; Li, X.; Zhang, Y. Overcoming barriers to the adoption of recycled construction materials: a comprehensive PEST analysis and tailored strategies. Sustainability 2023, 15, 14635.
327. Mubarik, M. S.; Kontoleon, A.; Shahbaz, M. Beyond the hurdles: exploring policy obstacles in the path to circular economy adoption. J. Environ. Manage. 2024, 370, 122667.
328. Pettersson, M.; Johansson, O. Waste as a resource in the green transition: legal preconditions for secondary extraction. Resour. Policy. 2025, 103, 105556.
329. Yan, P.; Ma, Z.; Li, H.; Gong, P.; Xu, M.; Chen, T. Laboratory tests, field application and carbon footprint assessment of cement-stabilized pure coal solid wastes as pavement base materials. Constr. Build. Mater. 2023, 366, 130265.
