REFERENCES
1. Dümmer, T.; Lasalvia, J.; Ravichandran, G.; Meyers, M. Effect of strain rate on plastic flow and failure in polycrystalline tungsten. Acta. Mater. 1998, 46, 6267-90.
2. Miao, Z.; Wu, Z.; Wang, D. Preparation and mechanical properties of rare earth reinforced tungsten alloy for photovoltaic cutting. China. Molybdenum. Ind. 2023, 47, 57-60.
3. Cao, J.; Sun, Y.; Wu, B.; et al. Research status of manufacturing technology of tungsten alloy wire. Micromachines 2023, 14, 1030.
4. Coenen, J. W.; Lee, V. Y. S.; Mao, Y.; et al. Evolution of tungsten fiber‐reinforced tungsten‐remarks on production and joining. Adv. Eng. Mater. 2023, 25, 2300569.
5. Safahi, H.; Sabour, M.; Baniasadi, M.; Faraji, G. Fracture behavior of W-20Cu composite processed via copper melt infiltration into tungsten wire skeleton. Eng. Fail. Anal. 2025, 172, 109426.
6. Safahi, H.; Baniassadi, M.; Faraji, G. Processing of fully dense and high conductivity W 20Cu composite via copper melt infiltration into a pressed tungsten wire skeleton. Int. J. Refract. Met. Hard. Mater. 2024, 124, 106809.
7. Alishah, A. Z.; Baniassadi, M.; Faraji, G. Processing and characterization of bicontinuous W-50Cu composite produced by entangled fiber plasma sintering (ETFPS) route. Int. J. Refract. Met. Hard. Mater. 2026, 137, 107653.
8. Riesch, J.; Fuhr, M.; Almanstötter, J. Tungsten wire - from lamp filaments to reinforcement fibers for composites in fusion reactors. Adv. Eng. Mater. 2024, 26, 2470046.
9. Zhao, P.; Riesch, J.; Höschen, T.; et al. Microstructure, mechanical behaviour and fracture of pure tungsten wire after different heat treatments. Int. J. Refract. Met. Hard. Mater. 2017, 68, 29-40.
10. Chen, Y.; Chen, C.; Chen, J.; et al. The effect of Y2O3 particles on the microstructure and mechanical properties of tungsten fiber-reinforced tungsten composites. Mater. Sci. Eng. A. 2024, 918, 147449.
11. Lied, P.; Pantleon, W.; Bonnekoh, C.; et al. Comparison of K-doped and pure cold-rolled tungsten sheets: tensile properties and brittle-to-ductile transition temperatures. J. Nucl. Mater. 2021, 544, 152664.
12. Fuhr, M. Deformation mechanisms of drawn tungsten wires. München: Technical University of Munich (TUM); 2024. Available from: https://mediatum.ub.tum.de/doc/1709412/1709412.pdf [Last accessed on 16 Jul 2026].
13. Nogami, S.; Hasegawa, A.; Fukuda, M.; Rieth, M.; Reiser, J.; Pintsuk, G. Mechanical properties of tungsten: recent research on modified tungsten materials in Japan. J. Nucl. Mater. 2021, 543, 152506.
14. Shu, R.; Mao, Y.; Coenen, J. W.; et al. Microstructure and mechanical properties of Wf/W composites influenced by Y2O3 coating. Int. J. Refract. Met. Hard. Mater. 2023, 115, 106322.
15. Chen, Y.; Chen, C.; Wang, J.; et al. The effect of Re on the microstructure and mechanical properties of tungsten fiber-reinforced tungsten composites. J. Alloys. Compd. 2025, 1042, 184139.
16. Roundy, D.; Krenn, C. R.; Cohen, M. L.; Morris, J. W. The ideal strength of tungsten. Philos. Mag. A. 2001, 81, 1725-47.
17. Li, Y.; Raabe, D.; Herbig, M.; et al. Segregation stabilizes nanocrystalline bulk steel with near theoretical strength. Phys. Rev. Lett. 2014, 113, 106104.
18. Wurmshuber, M.; Alfreider, M.; Wurster, S.; Burtscher, M.; Pippan, R.; Kiener, D. Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten. Acta. Mater. 2023, 250, 118878.
19. Ren, C.; Fang, Z. Z.; Xu, L.; Ligda, J. P.; Paramore, J. D.; Butler, B. G. An investigation of the microstructure and ductility of annealed cold-rolled tungsten. Acta. Mater. 2019, 162, 202-13.
20. Shu, R.; Broeckmann, C.; Linsmeier, C. Fracture mechanical properties of continuous tungsten fiber reinforced tungsten matrix composites. 2024. Available from: https://www.iwm.rwth-aachen.de/cms/iwm/forschung/publikationen/~luzw/details/?file=998211&lidx=1 [Last accessed on 16 Jul 2026].
21. Li, P.; Hua, Y. L.; Yan, S. L.; Zhou, Y. F.; Wei, X. F.; Xue, K. M. Strengthening mechanisms of pure tungsten subjected to high pressure torsion: Deviation from classic Hall‐Petch relation. Materialwiss. Werkst. 2020, 51, 338-48.
22. Gietl, H.; Olbrich, S.; Riesch, J.; et al. Estimation of the fracture toughness of tungsten fibre-reinforced tungsten composites. Eng. Fract. Mech. 2020, 232, 107011.
23. Bonnekoh, C.; Jäntsch, U.; Hoffmann, J.; et al. The brittle-to-ductile transition in cold rolled tungsten plates: impact of crystallographic texture, grain size and dislocation density on the transition temperature. Int. J. Refract. Met. Hard. Mater. 2019, 78, 146-63.
24. Tanure, L.; Terentyev, D.; Nikolić, V.; Riesch, J.; Verbeken, K. EBSD characterization of pure and K-doped tungsten fibers annealed at different temperatures. J. Nucl. Mater. 2020, 537, 152201.
25. Bonnekoh, C.; Lied, P.; Zaefferer, S.; et al. The brittle-to-ductile transition in cold-rolled tungsten sheets: Contributions of grain and subgrain boundaries to the enhanced ductility after pre-deformation. Nucl. Mater. Energy. 2020, 25, 100769.
26. Riesch, J.; Han, Y.; Almanstötter, J.; et al. Development of tungsten fibre-reinforced tungsten composites towards their use in DEMO—potassium doped tungsten wire. Phys. Scr. 2016, T167, 014006.
27. Terentyev, D.; Van Renterghem, W.; Tanure, L.; et al. Correlation of microstructural and mechanical properties of K-doped tungsten fibers used as reinforcement of tungsten matrix for high temperature applications. Int. J. Refract. Met. Hard. Mater. 2019, 79, 204-16.
29. Garbacz, A.; Grabski, M. The relationship between texture and CSL boundaries distribution in polycrystalline materials—II. Analysis of the relationship between texture and coincidence grain boundary distribution. Acta. Metall. Mater. 1993, 41, 475-83.
30. Randle, V. The role of the coincidence site lattice in grain boundary engineering. London: CRC Press; 2024.
31. Schnitzel, R.; Keith, G. Deformation twins in single crystals of tungsten. J. Less. Common. Met. 1962, 4, 98-101.
32. Cui, J.; Ma, L.; Chen, G.; et al. Effect of twin boundaries on the strength of body-centered cubic tungsten nanowires. Mater. Sci. Eng. A. 2023, 862, 143826.
33. Pappu, S.; Sen, S.; Murr, L.; Kapoor, D.; Magness, L. Deformation twins in oriented, columnar-grained tungsten rod ballistic penetrators. Mater. Sci. Eng. A. 2001, 298, 144-57.
34. Wang, J.; Zeng, Z.; Weinberger, C. R.; Zhang, Z.; Zhu, T.; Mao, S. X. In situ atomic-scale observation of twinning-dominated deformation in nanoscale body-centred cubic tungsten. Nat. Mater. 2015, 14, 594-600.
35. Qian, J.; Wu, C.; Fan, J.; Gong, H. Effect of alloying elements on stacking fault energy and ductility of tungsten. J. Alloys. Compd. 2018, 737, 372-6.
36. Wang, J.; Faisal, A. H.; Li, X.; et al. Discrete twinning dynamics and size-dependent dislocation-to twin transition in body-centred cubic tungsten. J. Mater. Sci. Technol. 2022, 106, 33-40.
38. Kamikawa, N.; Huang, X.; Tsuji, N.; Hansen, N. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed. Acta. Mater. 2009, 57, 4198-208.
39. Feng, H.; Fang, F.; Zhou, X.; Zhang, X.; Xie, Z.; Jiang, J. Heavily cold drawn iron wires: role of nano-lamellae in enhancing the tensile strength. Mater. Sci. Eng. A. 2020, 796, 140017.
40. Sansoz, F.; Ke, X. Hall-Petch strengthening limit through partially active segregation in nanocrystalline Ag-Cu alloys. Acta. Mater. 2022, 225, 117560.
41. Schneider, M.; George, E.; Manescau, T.; et al. Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy. Int. J. Plast. 2020, 124, 155-69.
42. Wei, Q.; Jiao, T.; Ramesh, K.; et al. Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression. Acta. Mater. 2005, 54, 77-87.
43. Hall, E. O. The deformation and ageing of mild steel: III discussion of results. Proc. Phys. Soc. B. 1951, 64, 747-53.
45. Armstrong, R. The (cleavage) strength of pre-cracked polycrystals. Eng. Fract. Mech. 1987, 28, 529-38.
46. Cordero, Z. C.; Knight, B. E.; Schuh, C. A. Six decades of the Hall-Petch effect - a survey of grain-size strengthening studies on pure metals. Int. Mater. Rev. 2016, 61, 495-512.
47. Zhang, X.; Godfrey, A.; Huang, X.; Hansen, N.; Liu, Q. Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire. Acta. Mater. 2011, 59, 3422-30.
48. Zhang, X.; Hansen, N.; Godfrey, A.; Huang, X. Dislocation-based plasticity and strengthening mechanisms in sub-20 nm lamellar structures in pearlitic steel wire. Acta. Mater. 2016, 114, 176-83.
49. Kuhlmann-Wilsdorf, D. Theory of plastic deformation: - properties of low energy dislocation structures. Mater. Sci. Eng. A. 1989, 113, 1-41.
50. Gil Sevillano, J.; Aernoudt, E. Low energy dislocation structures in highly deformed materials. Mater. Sci. Eng. 1987, 86, 35-51.
51. Hansen, N.; Kuhlmann-Wilsdorf, D. Low energy dislocation structures due to unidirectional deformation at low temperatures. Mater. Sci. Eng. 1986, 81, 141-61.
52. Jiang, Y.; Zhou, X.; Li, X.; Lu, K. Stabilizing nanograined austenitic stainless steel with grain boundary relaxation. Acta. Mater. 2023, 256, 119134.
53. Sun, Y.; Luo, Z.; Li, X.; Lu, K. Effects of stacking fault energy on deformation induced grain boundary relaxation in nanograined Cu alloys. Acta. Mater. 2022, 239, 118256.
54. Zhou, X.; Li, X.; Lu, K. Stabilizing nanograins in metals with grain boundary relaxation. Scr. Mater. 2020, 187, 345-9.
55. Upmanyu, M.; Srolovitz, D.; Shvindlerman, L.; Gottstein, G. Misorientation dependence of intrinsic grain boundary mobility: simulation and experiment. Acta. Mater. 1999, 47, 3901-14.
56. Brokman, A.; Balluffi, R. Coincidence lattice model for the structure and energy of grain boundaries. Acta. Metall. 1981, 29, 1703-19.
57. Xiao, J.; Li, S.; Ma, X.; et al. Origin of deformation twinning in bcc tungsten and molybdenum. Phys. Rev. Lett. 2023, 131, 136101.
58. Wolf, D. Correlation between the energy and structure of grain boundaries in b.c.c. metals I. Symmetrical boundaries on the (110) and (100) planes. Philos. Mag. B. 2006, 59, 667-80.
59. Wolf, D. Correlation between the energy and structure of grain boundaries in b.c.c. metals. II. Symmetrical tilt boundaries. Philos. Mag. B. A. 1990, 62, 447-64.
60. Ratanaphan, S.; Olmsted, D. L.; Bulatov, V. V.; Holm, E. A.; Rollett, A. D.; Rohrer, G. S. Grain boundary energies in body-centered cubic metals. Acta. Mater. 2015, 88, 346-54.
61. Sursaeva, V. G.; Shvindlerman, L. S.; Gottshtain, G. Features of migration of triple junctions of different configuration. Bull. Russ. Acad. Sci. Phys. 2007, 71, 1697-701.
62. Saldana, C.; Murthy, T. G.; Shankar, M. R.; Stach, E. A.; Chandrasekar, S. Stabilizing nanostructured materials by coherent nanotwins and their grain boundary triple junction drag. Appl. Phys. Lett. 2009, 94, 021910.
63. Upmanyu, M.; Srolovitz, D.; Shvindlerman, L.; Gottstein, G. Molecular dynamics simulation of triple junction migration. Acta. Mater. 2002, 50, 1405-20.
64. Chen, K.; Wu, W.; Liao, C.; Chen, L.; Tu, K. N. Observation of atomic diffusion at twin-modified grain boundaries in copper. Science 2008, 321, 1066-9.
65. Chen, C.; Florando, J.; Kumar, M.; Ramesh, K.; Hemker, K. Incipient deformation twinning in dynamically sheared bcc tantalum. Acta. Mater. 2014, 69, 114-25.
66. Argon, A.; Maloof, S. Fracture of tungsten single crystals at low temperatures. Acta. Metall. 1966, 14, 1463-8.
67. Florando, J. N.; El-Dasher, B. S.; Chen, C.; et al. Effect of strain rate and dislocation density on the twinning behavior in tantalum. AIP. Adv. 2016, 6, 045120.
68. Li, X.; Zhang, Z.; Wang, J. Deformation twinning in body-centered cubic metals and alloys. Prog. Mater. Sci. 2023, 139, 101160.
70. Hazan, A.; Hillel, G.; Kalabukhov, S.; Frage, N.; Zaretsky, E.; Meshi, L. Shock-induced twinning in polycrystalline vanadium: I. twinning stress. Mater. Charact. 2021, 175, 111061.
71. Ecke, M.; Michael, O.; Halle, T. On the effect of aluminum and chromium on the deformation twinning of body-centered cubic iron. IOP. Conf. Ser. Mater. Sci. Eng. 2020, 882, 012007.
72. Hazan, A.; Hillel, G.; Kalabukhov, S.; Frage, N.; Zaretsky, E.; Meshi, L. Shock-induced twinning in polycrystalline vanadium: II. Surface layer. Mater. Charact. 2021, 175, 111062.
73. Zepeda-Ruiz, L. A.; Stukowski, A.; Oppelstrup, T.; Bulatov, V. V. Probing the limits of metal plasticity with molecular dynamics simulations. Nature 2017, 550, 492-5.
74. Wang, J.; Zeng, Z.; Wen, M.; et al. Anti-twinning in nanoscale tungsten. Sci. Adv. 2020, 6, eaay2792.
