REFERENCES

1. Banerjee, D. The intermetallic Ti2AlNb. Prog. Mater. Sci. 1997, 42, 135-58.

2. Hu, R.; Zhang, K.; Zou, H.; et al. Research progress on Ti2AlNb-based alloys and composites for aerospace applications. J. Alloys. Compd. 2025, 1021, 179701.

3. Guo, Y.; Liu, Y.; Wu, Y.; Cao, H.; Mo, D.; Morandini, M. Design optimization and burst speed prediction of a Ti2AlNb blisk. Int. J. Aerosp. Eng. 2021, 2021, 1-12.

4. Fu, Y.; Su, Z. Elemental composition, phase diagram, microstructure, fabrication processes, and mechanical properties of Ti2AlNb alloy: a review. J. Mater. Eng. Perform. 2024, 33, 12819-46.

5. Li, N.; Yu, S.; Liu, J.; et al. Dynamic spheroidization and synergistic evolution of the lamellar microstructure in the Ti2AlNb alloy during hot deformation below the B2-transus temperature. J. Alloys. Compd. 2026, 1076, 189312.

6. Zhou, M.; Bu, Z.; Zhou, Y.; et al. The effect of primary and secondary O phase on the mechanical properties and deformation behavior of Ti2AlNb alloy. J. Alloys. Compd. 2025, 1032, 181160.

7. Germann, L.; Banerjee, D.; Guédou, J.; Strudel, J. Effect of composition on the mechanical properties of newly developed Ti2AlNb-based titanium aluminide. Intermetallics 2005, 13, 920-4.

8. Liu, T.; Li, X.; Wei, B. The influences of heat treatment on the microstructure and mechanical properties of rolled Ti2AlNb. Metals 2023, 13, 886.

9. Jia, Z.; Zhang, Y.; Yu, Q.; et al. Enhancing mechanical properties of (Ti, Nb)B/Ti2AlNb composites via hot extrusion: microstructural evolution, strengthening and fracture mechanisms. Mater. Sci. Eng. A. 2026, 962, 150169.

10. Zhou, Y.; Zhou, M.; Bu, Z.; Huang, X.; Li, J. Effect of aging time on microstructure and mechanical properties of Ti2AlNb alloy. Mater. Lett. 2026, 422, 141300.

11. Wang, W.; Zeng, W.; Xue, C.; Liang, X.; Zhang, J. Designed bimodal size lamellar O microstructures in Ti2AlNb based alloy: microstructural evolution, tensile and creep properties. Mater. Sci. Eng. A. 2014, 618, 288-94.

12. Zou, Y.; Zhang, X.; Zhang, W.; Han, F.; Han, J.; Jia, Y. Effect of solution temperature on the microstructure and properties of Ti2AlNb alloy sheets. Intermetallics 2026, 192, 109217.

13. Tang, W.; Shao, B.; Zong, Y. The effect of 0.02-0.37 strain on the precipitation law of O phase colonies in Ti2AlNb-based alloy during aging. J. Mater. Res. Technol. 2023, 22, 89-96.

14. Zheng, Y.; Zeng, W.; Li, D.; et al. Orthorhombic precipitate variant selection in a Ti2AlNb based alloy. Mater. Des. 2018, 158, 46-61.

15. Wu, Y.; Kou, H.; Tang, B.; Liu, D.; Li, J.; Li, J. O phase precipitation and variant selection in Ti-22Al-25Nb alloy during the hot shear spinning. Adv. Eng. Mater. 2018, 20, 1800153.

16. Wei, J.; Jia, Y.; Zhang, Y.; et al. Effect of hot rolling process on the evolution of microstructure and mechanical properties of Ti2AlNb-based alloy foil during cold rolling. Mater. Charact. 2024, 210, 113784.

17. Erndt-Marino, J. D.; Becerra-Bayona, S.; McMahon, R. E.; Goldstein, A. S.; Hahn, M. S. Cell layer-electrospun mesh composites for coronary artery bypass grafts. J. Biomed. Mater. Res. A. 2016, 104, 2200-9.

18. Guo, Y.; Niu, J.; Cao, J.; Sun, Z.; Dan, Z.; Chang, H. Relative strength of β phase stabilization by transition metals in titanium alloys: the Mo equivalent from a first principles study. Mater. Today. Commun. 2023, 35, 106123.

19. He, Y.; Hu, R.; Luo, W.; et al. Microstructure and mechanical properties of a new Ti2AlNb‐based alloy after aging treatment. Rare. Metals. 2018, 37, 942-51.

20. Wang, W.; Zeng, W.; Xue, C.; Liang, X.; Zhang, J. Microstructure control and mechanical properties from isothermal forging and heat treatment of Ti-22Al-25Nb (at.%) orthorhombic alloy. Intermetallics 2015, 56, 79-86.

21. Wang, W.; Zeng, W.; Liu, Y.; Xie, G.; Liang, X. Microstructural evolution and mechanical properties of Ti-22Al-25Nb (At.%) orthorhombic alloy with three typical microstructures. J. Mater. Eng. Perform. 2018, 27, 293-303.

22. Wang, W.; Zeng, W.; Li, D.; Zhu, B.; Zheng, Y.; Liang, X. Microstructural evolution and tensile behavior of Ti2AlNb alloys based α2-phase decomposition. Mater. Sci. Eng. A. 2016, 662, 120-8.

23. Sui, X.; Wang, G.; Liu, Q.; Liu, Y.; Chen, Y. Fabricating Ti2AlNb sheet with tensile strength higher than 1500 MPa by hot packed rolling spark-plasma-sintered pre-alloyed Ti2AlNb powder at the B2+O phase field. J. Alloys. Compd. 2021, 876, 160110.

24. Zhang, H.; Wu, Y.; Zhang, J.; Liu, Y. Synergistic effect of B2 phase and O phase in hot-rolled Ti2AlNb alloy and its influences on mechanical properties. J. Mater. Res. Technol. 2024, 30, 2004-17.

25. Tang, Y.; Zhang, Y.; Liu, Y. Numerical and experimental investigation of laser additive manufactured Ti2AlNb-based alloy. J. Alloys. Compd. 2017, 727, 196-204.

26. Zhou, Y.; Wang, D.; Song, L.; et al. Effect of heat treatments on the microstructure and mechanical properties of Ti2AlNb intermetallic fabricated by selective laser melting. Mater. Sci. Eng. A. 2021, 817, 141352.

27. Polozov, I.; Gracheva, A.; Popovich, A. Processing, microstructure, and mechanical properties of laser additive manufactured Ti2AlNb-based alloy with carbon, boron, and yttrium microalloying. Metals 2022, 12, 1304.

28. Chen, Q.; Xu, L.; Zhang, Y.; et al. Additive manufacturing Ti-22Al-25 Nb alloy with excellent high temperature tensile properties by electron beam powder bed fusion. Addit. Manuf. 2024, 86, 104236.

29. Jia, J.; Liu, W.; Xu, Y.; et al. Microstructure evolution, B2 grain growth kinetics and fracture behaviour of a powder metallurgy Ti-22Al-25Nb alloy fabricated by spark plasma sintering. Mater. Sci. Eng. A. 2018, 730, 106-18.

30. Jia, J.; Zhang, K.; Jiang, S. Microstructure and mechanical properties of Ti-22Al-25Nb alloy fabricated by vacuum hot pressing sintering. Mater. Sci. Eng. A. 2014, 616, 93-8.

31. Wang, G.; Yang, J.; Jiao, X. Microstructure and mechanical properties of Ti-22Al-25Nb alloy fabricated by elemental powder metallurgy. Mater. Sci. Eng. A. 2016, 654, 69-76.

32. Fu, Y.; Cui, Z. Effects of plastic deformation and aging treatment on phase precipitation in Ti2AlNb alloy. J. Mater. Eng. Perform. 2022, 31, 2633-43.

33. Sadi, F.; Servant, C. On the B2→O phase transformation in Ti-Al-Nb alloys. Mater. Sci. Eng. A. 2003, 346, 19-28.

34. Zhang, P.; Zeng, W.; Ma, H.; et al. Research on tensile anisotropy of Ti-22Al-25Nb alloy isothermally forged in B2 phase region related with texture and variant selection. Mater. Charact. 2023, 201, 112899.

35. Furuhara, T.; Maki, T. Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation. Mater. Sci. Eng. A. 2001, 312, 145-54.

36. Bendersky, L.; Boettinger, W.; Roytburd, A. Coherent precipitates in the b.c.c./orthorhombic two-phase field of the Ti Al Nb system. Acta. Metall. Mater. 1991, 39, 1959-69.

37. Wang, A.; Liu, P.; Xie, J.; Ma, D.; Mao, Z. First-principles investigation on the atomic structure, stability and electronic property of O(001)/B2(110) interface in Ti2AlNb alloys. J. Alloys. Compd. 2020, 817, 152734.

38. Zhou, X.; Liu, J.; Zhang, S.; et al. Microstructure evolution and coarsening behavior of precipitated O phase in Ti-22Al-24Nb-0.5Mo (at. %) alloy during the heat treatment. J. Mater. Res. Technol. 2023, 27, 4236-47.

39. Tumminello, S.; Gussone, J.; Fries, S. G.; et al. Precipitation simulations of the O‐phase in Ti2AlNb alloys processed by laser powder bed fusion. Adv. Eng. Mater. 2026, 28, e70963.

40. Zhang, H.; Yan, N.; Liang, H.; Liu, Y. Phase transformation and microstructure control of Ti2AlNb-based alloys: a review. J. Mater. Sci. Technol. 2021, 80, 203-16.

41. Bailey, J. E.; Hirsch, P. B. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver. Philos. Mag. 1960, 5, 485-97.

42. Stoller, R.; Zinkle, S. On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials. J. Nucl. Mater. 2000, 283-287, 349-52.

43. Mughrabi, H. The α-factor in the Taylor flow-stress law in monotonic, cyclic and quasi-stationary deformations: dependence on slip mode, dislocation arrangement and density. Curr. Opin. Solid. State. Mater. Sci. 2016, 20, 411-20.

44. Williamson, G. K.; Smallman, R. E. III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum. Philos. Mag. 1956, 1, 34-46.

45. Williamson, G.; Hall, W. X-ray line broadening from filed aluminium and wolfram. Acta. Metall. 1953, 1, 22-31.

46. Zhang, Z.; Chen, D. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength. Scr. Mater. 2006, 54, 1321-6.

47. Zheng, Y.; Zeng, W.; Zhang, P.; et al. Anti-correlation between solution strengthening and precipitation strengthening in lamellar O microstructures of a Ti2AlNb based alloy. J. Alloys. Compd. 2020, 847, 156470.

48. Zhu, Y.; Song, J.; Li, Z.; et al. Study on the relationship between microstructure and tensile properties of Ti-22Al-25Nb alloy and the establishment of quantitative models. J. Alloys. Compd. 2025, 1020, 179374.

49. Zhang, P.; Zeng, W.; Zhang, F.; et al. In-situ investigation of tensile anisotropy mechanism in an advanced Ti2AlNb-based alloy associated with CRSS ratio and damage model. Mater. Sci. Eng. A. 2024, 890, 145894.

50. Shao, B.; Tang, W.; Guo, S.; Zong, Y.; Shan, D.; Guo, B. Investigation of the O phase in the Ti-22Al-25Nb alloy during deformation at elevated temperatures: plastic deformation mechanism and effect on B2 grain boundary embrittlement. Acta. Mater. 2023, 242, 118467.