REFERENCES

1. Tomé, C. N.; Lebensohn, R. A. Material modeling with the visco-plastic self-consistent (VPSC) approach: theory and practical applications; Elsevier, 2023.

2. He, L.; Li, Y.; Torrent, D.; Zhuang, X.; Rabczuk, T.; Jin, Y. Machine learning assisted intelligent design of meta structures: a review. Microstructures 2023, 3, 2023034.

3. Miao, B.; Lin, G.; Zhang, Y.; Cheng, Y.; Yang, H. Machine learning applications in metallic materials: Recent advances and future perspectives. J. Alloys. Compd. 2026, 1062, 187486.

4. Li, W.; Xie, D.; Li, D.; Zhang, Y.; Gao, Y.; Liaw, P. K. Mechanical behavior of high-entropy alloys. Prog. Mater. Sci. 2021, 118, 100777.

5. Wang, Y.; Jiao, Z.; Bian, G.; et al. Dynamic tension and constitutive model in Fe₄₀Mn₂₀Cr₂₀Ni₂₀ high-entropy alloys with a heterogeneous structure. Mat. Sci. Eng. A-Struct. 2022, 839, 142837.

6. Zhang, Z.; Sheng, H.; Wang, Z.; et al. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy. Nat. Commun. 2017, 8, 14390.

7. Dowding, I.; Schuh, C. A. Metals strengthen with increasing temperature at extreme strain rates. Nature 2024, 630, 91-5.

8. Borodin, E. N.; Gruzdkov, A. A.; Mayer, A. E.; Selyutina, N. S. Physical nature of strain rate sensitivity of metals and alloys at high strain rates. J. Phys:. Conf. Ser. 2018, 991, 012012.

9. Fan, H.; Wang, Q.; El-awady, J. A.; Raabe, D.; Zaiser, M. Strain rate dependency of dislocation plasticity. Nat. Commun. 2021, 12, 1845.

10. Liang, Z.; Wang, X.; Huang, W.; Huang, M. Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel. Acta. Mater. 2015, 88, 170-9.

11. Li, C.; Cao, F.; Chen, Y.; Wang, H.; Dai, L. Crystal plasticity model analysis of the effect of short-range order on strength-plasticity of medium entropy alloys. Metals 2022, 12, 1757.

12. Ma, E. Unusual dislocation behavior in high-entropy alloys. Scr. Mater. 2020, 181, 127-33.

13. Chandan, A. K.; Tripathy, S.; Ghosh, M.; Chowdhury, S. G. Evolution of substructure of a non-equiatomic FeMnCrCo high entropy alloy deformed at ambient temperature. Metall. Mater. Trans. A. 2019, 50, 5079-90.

14. Choudhuri, D.; Gwalani, B.; Gorsse, S.; et al. Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds. Acta. Mater. 2019, 165, 420-30.

15. Cho, K.; Van Merrienboer, B.; Gulcehre, C.; et al. Learning Phrase Representations using RNN Encoder–Decoder for Statistical Machine Translation. In Proceedings of the 2014 Conference on Empirical Methods in Natural Language Processing (EMNLP), Doha, Qatar, September, 2014; Association for Computational Linguistics: Stroudsburg, PA, USA, 2014, pp 1724-34.

16. Mozaffar, M.; Bostanabad, R.; Chen, W.; Ehmann, K.; Cao, J.; Bessa, M. A. Deep learning predicts path-dependent plasticity. Proc. Natl. Acad. Sci. U.S.A. 2019, 116, 26414-20.

17. Hu, C.; Martin, S.; Dingreville, R. Accelerating phase-field predictions via recurrent neural networks learning the microstructure evolution in latent space. Comput. Methods. Appl. Mech. Eng. 2022, 397, 115128.

18. Bonatti, C.; Mohr, D. On the importance of self-consistency in recurrent neural network models representing elasto-plastic solids. J. Mech. Phys. Solids. 2022, 158, 104697.

19. Heidenreich, J. N.; Mohr, D. Recurrent neural network plasticity models: Unveiling their common core through multi-task learning. Comput. Methods. Appl. Mech. Eng. 2024, 426, 116991.

20. Lim, B.; Zohren, S. Time-series forecasting with deep learning: a survey. Phil. Trans. R. Soc. A. 2021, 379, 20200209.

21. Vaswani, A.; Shazeer, N.; Parmar, N.; et al. Attention is All you Need. In Advances in Neural Information Processing Systems (NIPS 2017), Long Beach, CA, USA, 2017; Vol. 30, pp 5998-6008.

22. Borkowski, L.; Sorini, C.; Chattopadhyay, A. Recurrent neural network-based multiaxial plasticity model with regularization for physics-informed constraints. Comput. Struct. 2022, 258, 106678.

23. Liu, X.; He, J.; Huang, S. Mechanistically informed artificial neural network model for discovering anisotropic path-dependent plasticity of metals. Mater. Des. 2023, 226, 111697.

24. Eghtesad, A.; Tan, J.; Fuhg, J. N.; Bouklas, N. NN-EVP: A physics informed neural network-based elasto-viscoplastic framework for predictions of grain size-aware flow response. Int. J. Plast. 2024, 181, 104072.

25. Long, X.; Steve, N. T. N. A.; Wahaajuddin, K. K. Physics-constrained machine learning for constitutive modelling of high-strength concrete across strain rates. Eng. Appl. Artif. Intell. 2026, 171, 114314.

26. Wang, K.; Jin, X.; Zhang, Y.; Liaw, P. K.; Qiao, J. Dynamic tensile mechanisms and constitutive relationship in CrFeNi medium entropy alloys at room and cryogenic temperatures. Phys. Rev. Mater. 2021, 5, 113608.

27. Ibragimova, O.; Brahme, A.; Muhammad, W.; Lévesque, J.; Inal, K. A new ANN based crystal plasticity model for FCC materials and its application to non-monotonic strain paths. Int. J. Plast. 2021, 144, 103059.

28. Hou, J.; Qiao, J.; Lian, J.; Liaw, P. K. Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al_0.1CoCrFeNi high-entropy alloys. Mat. Sci. Eng. A-Struct. 2021, 804, 140752.

29. Zecevic, M.; Cawkwell, M.; Ramos, K.; Luscher, D. Crystal plasticity including a phase-field deformation twinning model for the high-rate deformation of cyclotetramethylene tetranitramine. J. Mech. Phys. Solids. 2022, 163, 104872.

30. Wu, K.; Sun, X.; Liu, B.; et al. A multiscale investigation into the electroplastic effects in copper: Experiments and crystal plasticity modeling. J. Mech. Phys. Solids. 2026, 212, 106597.

31. Sun, X.; Zhou, K.; Liu, C.; et al. A crystal plasticity based strain rate dependent model across an ultra-wide range. Int. J. Plast. 2024, 180, 104056.

32. Orowan, E. Problems of plastic gliding. Proc. Phys. Soc. 1940, 52, 8-22.

33. Beyerlein, I.; Tomé, C. A dislocation-based constitutive law for pure Zr including temperature effects. Int. J. Plast. 2008, 24, 867-95.

34. Zinovev, A.; Terentyev, D.; Dubinko, A.; Delannay, L. Constitutive law for thermally-activated plasticity of recrystallized tungsten. J. Nucl. Mater. 2017, 496, 325-32.

35. Hall, E. O. The deformation and ageing of mild steel: III discussion of results. Proc. Phys. Soc. B. 1951, 64, 747-53.

36. Petch, N. J. The cleavage strength of polycrystals. J. Iron. Steel. Inst. 1953, 174, 25-28.

37. Conrad, H.; Feuerstein, S.; Rice, L. Effects of grain size on the dislocation density and flow stress of niobium. Mater. Sci. Eng. 1967, 2, 157-68.

38. Ashby, M. F. The deformation of plastically non-homogeneous materials. Philos. Mag. 2006, 21, 399-424.

39. Cordero, Z. C.; Knight, B. E.; Schuh, C. A. Six decades of the Hall-Petch effect - a survey of grain-size strengthening studies on pure metals. Int. Mater. Rev. 2016, 61, 495-512.

40. Zhu, T.; Li, J.; Samanta, A.; Kim, H. G.; Suresh, S. Interfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals. Proc. Natl. Acad. Sci. U.S.A. 2007, 104, 3031-6.

41. Beyerlein, I.; Mccabe, R.; Tomé, C. Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: A multi-scale modeling study. J. Mech. Phys. Solids. 2011, 59, 988-1003.

42. Loshchilov, I.; Hutter, F. Decoupled weight decay regularization. In Proceedings of the 7th International Conference on Learning Representations (ICLR 2019), New Orleans, LA, USA, May 6-9, 2019; Curran Associates, Inc.: Red Hook, NY, USA, 2019, pp. 4061-78. Available from: https://openreview.net/pdf?id=Bkg6RiCqY7 [accessed on 2026-6-2].

43. Akiba, T.; Sano, S.; Yanase, T.; Ohta, T.; Koyama, M. Optuna. In KDD '19: The 25th ACM SIGKDD Conference on Knowledge Discovery and Data Mining, Anchorage AK USA; ACM: New York, NY, USA, 2019, pp 2623-31.

44. Long, X.; Su, T.; Lu, C.; Wang, S.; Huang, J.; Chang, C. An insight into dynamic properties of SAC305 lead-free solder under high strain rates and high temperatures. Int. J. Impact. Eng. 2023, 175, 104542.

45. Long, X.; Shen, Z.; Li, J.; et al. Size effect of nickel-based single crystal superalloy revealed by nanoindentation with low strain rates. J. Mater. Res. Technol. 2024, 29, 2437-47.

46. Long, X.; Hu, Y.; Su, T.; et al. Thermomechanical constitutive behaviour of 3D printed biomimetic polymer material under high strain rates. Polym. Test. 2024, 134, 108439.

47. Samaniego, E.; Anitescu, C.; Goswami, S.; et al. An energy approach to the solution of partial differential equations in computational mechanics via machine learning: Concepts, implementation and applications. Comput. Methods. Appl. Mech. Eng. 2020, 362, 112790.

48. Goswami, S.; Anitescu, C.; Chakraborty, S.; Rabczuk, T. Transfer learning enhanced physics informed neural network for phase-field modeling of fracture. Theor. Appl. Fract. Mech. 2020, 106, 102447.