REFERENCES
1. Behera, A.; Sahoo, A. K.; Mahapatra, S. S. Electrical discharge machining of Ni-based superalloy and its applications in aero turbine parts: a comprehensive review. Adv. Mater. Proc. Technol. 2024, 11, 1085-121.
2. Al-nafeay, R. H.; Al-Roubaiy, A. O.; Omidvar, H. Overview of joining and repairing techniques of Ni-based superalloy for industrial gas turbine applications. IOP. Conf. Ser. Mater. Sci. Eng. 2021, 1094, 012141.
3. Yang, L.; Ren, N.; Li, J.; et al. Thermal-solutal convection-induced low-angle grain boundaries in single-crystal nickel-based superalloy solidification. J. Mater. Sci. Technol. 2025, 208, 214-29.
4. Chen, Y.; Yao, Z.; Dong, J.; et al. Microstructural deterioration mechanism of directionally solidified Ni-based superalloy used in first-stage industrial gas turbine blades after ultra long-term service. Mater. Charact. 2024, 213, 114000.
5. Yan, X.; Xu, Q.; Tian, G.; Liu, Q.; Hou, J.; Liu, B. Multi-scale modeling of liquid-metal cooling directional solidification and solidification behavior of nickel-based superalloy casting. J. Mater. Sci. Technol. 2021, 67, 36-49.
6. Guo, C.; Zha, H.; Wang, J.; et al. Coupled PF and LB simulation study of morphology evolution in columnar dendrite growth induced by natural convection. Results. Phys. 2025, 77, 108452.
7. Ren, N.; Li, J.; Panwisawas, C.; Xia, M.; Dong, H.; Li, J. Insight into the sensitivities of freckles in the directional solidification of single-crystal turbine blades. J. Manuf. Proc. 2022, 77, 219-28.
8. Zhang, H.; Zhao, Y.; Xiong, W.; et al. Modelling freckles and spurious grain formation in directionally solidified superalloy castings. Commun. Mater. 2024, 5, 232.
9. Yang, L.; Ren, N.; Xia, M.; Li, J.; Li, J. Multiphysics modeling of dendritic thermomechanical deformation during the directional solidification of nickel-based single-crystal superalloys. Int. J. Miner. Metall. Mater. 2025, 32, 2510-22.
10. Liu, Y.; Shang, Y.; Wang, F.; et al. A novel model of the cross-section variation effect induced by contraction convection on freckle defects in directional solidification. J. Mater. Res. Technol. 2025, 35, 570-80.
11. Reinhart, G.; Browne, D. J.; Kargl, F.; et al. In-situ X-ray monitoring of solidification and related processes of metal alloys. NPJ. Microgravity. 2023, 9, 70.
12. Zhang, Z.; Wang, C.; Koe, B.; Schlepütz, C. M.; Irvine, S.; Mi, J. Synchrotron X-ray imaging and ultrafast tomography in situ study of the fragmentation and growth dynamics of dendritic microstructures in solidification under ultrasound. Acta. Mater. 2021, 209, 116796.
13. Nagira, T.; Kitano, H.; Kimura, T.; et al. In-situ observation of solidification behaviors of Fe-Mn-Cr-Ni-Si alloy during TIG melt-run welding using synchrotron radiation X-ray. Mater. Charact. 2024, 214, 114093.
14. Wu, F.; Mullen, J.; Deng, Y.; et al. Probing dendrite growth under microgravity via machine learning-aided multi-scale characterisation. Acta. Mater. 2026, 302, 121659.
15. Shevchenko, N.; Budenkova, O.; Chichignoud, G.; Eckert, S. Formation of varying dendritic morphologies in a directionally solidifying Ga-In-Bi alloy. Acta. Mater. 2025, 288, 120818.
16. Neumann-heyme, H.; Shevchenko, N.; Grenzer, J.; Eckert, K.; Beckermann, C.; Eckert, S. In-situ measurements of dendrite tip shape selection in a metallic alloy. Phys. Rev. Mater. 2022, 6, 063401.
17. Ruvalcaba, D.; Mathiesen, R.; Eskin, D.; Arnberg, L.; Katgerman, L. In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy. Acta. Mater. 2007, 55, 4287-92.
18. Reinhart, G.; Grange, D.; Abou-Khalil, L.; et al. Impact of solute flow during directional solidification of a Ni-based alloy: in-situ and real-time X-radiography. Acta. Mater. 2020, 194, 68-79.
19. Xie, L.; Sun, H.; Wen, Y.; Hua, L.; Zhang, L. Electromagnetic treatment enhancing performance of metal materials: a review. Prog. Mater. Sci. 2025, 153, 101488.
20. Hu, Z.; Huang, C.; Xie, L.; Hua, L.; Yuan, Y.; Zhang, L. Machine learning assisted quality control in metal additive manufacturing: a review. Adv. Powder. Mater. 2025, 4, 100342.
21. Wang, B.; Tong, X.; Yu, P.; Tian, J.; Ouyang, H. An immersed boundary finite-volume method based on the wall shear stress model for incompressible Navier-Stokes equations. Ocean. Eng. 2026, 343, 123182.
22. Dobravec, T.; Mavrič, B.; Zahoor, R.; Šarler, B. A coupled domain-boundary type meshless method for phase-field modelling of dendritic solidification with the fluid flow. Int. J. Numer. Methods. Heat. Fluid. Flow. 2023, 33, 2963-81.
23. Xia, Q.; Lai, S.; Kim, J.; Li, Y. Phase field modeling of melting and solidification dynamics in metallic powders during the bed fusion process. Commun. Nonlinear. Sci. Numer. Simul. 2025, 146, 108762.
24. Shankar, B.; Shivakumara, I. Stability of natural convection in a vertical layer of Navier-Stokes-Voigt fluid. Int. Commun. Heat. Mass. Transfer. 2023, 144, 106783.
25. Zhang, X.; Kang, J.; Guo, Z.; Xiong, S.; Han, Q. Development of a Para-AMR algorithm for simulating dendrite growth under convection using a phase-field-lattice Boltzmann method. Comput. Phys. Commun. 2018, 223, 18-27.
26. Miller, W. The lattice Boltzmann method: a new tool for numerical simulation of the interaction of growth kinetics and melt flow. J. Cryst. Growth. 2001, 230, 263-9.
27. Miller, W.; Succi, S.; Mansutti, D. Lattice Boltzmann model for anisotropic liquid-solid phase transition. Phys. Rev. Lett. 2001, 86, 3578-81.
28. Rojas, R.; Takaki, T.; Ohno, M. A phase-field-lattice Boltzmann method for modeling motion and growth of a dendrite for binary alloy solidification in the presence of melt convection. J. Comput. Phys. 2015, 298, 29-40.
29. Yang, Q.; Zhang, A.; Jiang, B.; et al. Numerical investigation of eutectic growth dynamics under convection by 3D phase-field method. Comput. Math. Appl. 2022, 114, 83-94.
30. Sun, D.; Pan, S.; Han, Q.; Sun, B. Numerical simulation of dendritic growth in directional solidification of binary alloys using a lattice Boltzmann scheme. Int. J. Heat. Mass. Transfer. 2016, 103, 821-31.
31. Sun, D.; Zhu, M.; Wang, J.; Sun, B. Lattice Boltzmann modeling of bubble formation and dendritic growth in solidification of binary alloys. Int. J. Heat. Mass. Transfer. 2016, 94, 474-87.
32. Zhang, A.; Du, J.; Guo, Z.; Wang, Q.; Xiong, S. Evolution of specific interface area during solidification: a three-dimensional thermosolutal phase-field study. Comput. Phys. Commun. 2021, 267, 108042.
33. Zhang, A.; Meng, S.; Guo, Z.; Du, J.; Wang, Q.; Xiong, S. Dendritic growth under natural and forced convection in Al-Cu alloys: from equiaxed to columnar dendrites and from 2D to 3D phase-field simulations. Metall. Mater. Trans. B. 2019, 50, 1514-26.
34. Qiu, Y.; Wu, M.; Qin, X.; Xiong, S. Phase-field lattice-Boltzmann study on fully coupled thermal-solute-convection dendrite growth of Al-Cu alloy. China. Foundry. 2024, 21, 125-36.
35. Zhang, Y.; Zhou, J.; Yin, Y.; Ji, X.; Shen, X.; Guo, Z. Study on the solutal convection during dendrite growth of superalloy under directional solidification condition. J. Mater. Res. Technol. 2023, 23, 3916-27.
36. Yang, C.; Xu, Q. Y.; Liu, B. C. Phase‐field-lattice Boltzmann simulation of dendrite growth under natural convection in multicomponent superalloy solidification. Rare. Metals. 2019, 39, 147-55.
37. Lee, J.; Ohno, M.; Shibuta, Y.; Takaki, T. Uniquely selected primary dendrite arm spacing during competitive growth of columnar grains in Al-Cu alloy. J. Cryst. Growth. 2021, 558, 126014.
38. Takaki, T.; Sakane, S.; Ohno, M.; Shibuta, Y.; Aoki, T. Large-scale phase-field lattice Boltzmann study on the effects of natural convection on dendrite morphology formed during directional solidification of a binary alloy. Comput. Mater. Sci. 2020, 171, 109209.
39. Takaki, T.; Sakane, S.; Aoki, T. Natural convection on dendrite morphology: a high-performance phase-field Lattice Boltzmann Study. ISIJ. Int. 2023, 63, 83-90.
40. Ma, C.; Zhang, R.; Li, Z.; et al. Solidification shrinkage and shrinkage-induced melt convection and their relation with solute segregation in binary alloys. Comput. Mater. Sci. 2022, 215, 111815.
41. Yang, L.; Dong, Z.; Wang, L.; Provatas, N. Improved multi-order parameter and multi-component model of polycrystalline solidification. J. Mater. Sci. Technol. 2022, 101, 217-25.
42. Ma, D.; Wu, Q.; Bührig-Polaczek, A. Some new observations on freckle formation in directionally solidified superalloy components. Metall. Mater. Trans. B. 2011, 43, 344-53.
43. Ren, N.; Panwisawas, C.; Li, J.; Xia, M.; Dong, H.; Li, J. Solute enrichment induced dendritic fragmentation in directional solidification of nickel-based superalloys. Acta. Mater. 2021, 215, 117043.
44. Felicelli, S. D.; Poirier, D. R.; Heinrich, J. C. Modeling freckle formation in three dimensions during solidification of multicomponent alloys. Metall. Mater. Trans. B. 1998, 29, 847-55.
45. Felicelli, S. D.; Sung, P. K.; Poirier, D. R.; Heinrich, J. C. Transport properties and transport phenomena in casting nickel superalloys. Int. J. Thermophys. 2014, 19, 1657-69.
46. Sun, Q. Y.; Ren, Y.; Liu, D. Numerical investigations of freckles in directionally solidified nickel-based superalloy casting with abrupt contraction in cross section. Results. Phys. 2019, 12, 1547-58.
47. Matache, G.; Stefanescu, D. M.; Puscasu, C.; Alexandrescu, E. Dendritic segregation and arm spacing in directionally solidified CMSX-4 superalloy. Int. J. Cast. Metals. Res. 2016, 29, 303-16.
48. Schneider, M. C.; Gu, J. P.; Beckermann, C.; Boettinger, W. J.; Kattner, U. R. Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification. Metall. Mater. Trans. A. 1997, 28, 1517-31.
49. Sung, P. K.; Poirier, D. R.; Felicelli, S. D. Simulating the initiation of a channel during directional solidification of a superalloy. Metall. Mater. Trans. A. 2001, 32, 202-7.
50. Hobbs, R. A.; Tin, S.; Rae, C. M. F. A castability model based on elemental solid-liquid partitioning in advanced nickel-base single-crystal superalloys. Metall. Mater. Trans. A. 2005, 36, 2761-73.
51. Chen, S.; Doolen, G. D. Lattice Boltzmann method for fluid flows. Annu. Rev. Fluid. Mech. 1998, 30, 329-64.
52. Qian, Y. H.; D'humières, D.; Lallemand, P. Lattice BGK models for navier-stokes equation. Europhys. Lett. 1992, 17, 479-84.
53. Beckermann, C.; Diepers, H.; Steinbach, I.; Karma, A.; Tong, X. Modeling melt convection in phase-field simulations of solidification. J. Comput. Phys. 1999, 154, 468-96.
54. Medvedev, D.; Kassner, K. Lattice Boltzmann scheme for crystal growth in external flows. Phys. Rev. E. Stat. Nonlin. Soft. Matter. Phys. 2005, 72, 056703.
