REFERENCES
1. Herzog, D.; Seyda, V.; Wycisk, E.; Emmelmann, C. Additive manufacturing of metals. Acta Mater. 2016, 117, 371-92.
2. Elambasseril, J.; Song, T.; Mendis, S.; et al. Effect of powder characteristics on layer density, defects, and tensile properties of Ti-6Al-4V via laser powder bed fusion: establishing benchmark parameters for quality. Prog. Addit. Manuf. 2025, 10, 7449-70.
3. Wang, Y. M.; Voisin, T.; McKeown, J. T.; et al. Additively manufactured hierarchical stainless steels with high strength and ductility. Nat. Mater. 2018, 17, 63-71.
4. Liu, L.; Ding, Q.; Zhong, Y.; et al. Dislocation network in additive manufactured steel breaks strength-ductility trade-off. Mater. Today 2018, 21, 354-61.
5. Tan, Q.; Chang, H.; Liang, G.; et al. High performance plain carbon steels obtained through 3D-printing. Nat. Commun. 2024, 15, 10077.
6. Ren, J.; Zhang, Y.; Zhao, D.; et al. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing. Nature 2022, 608, 62-8.
7. Zhu, T.; Chen, W. Mechanical behaviour of additively manufactured metals. Nat. Mater. 2026, 25, 373-85.
8. Qian, M.; Xu, W.; Brandt, M.; Tang, H. Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties. MRS Bull. 2016, 41, 775-84.
9. Medvedev, A.; Brudler, S.; Piegert, S.; et al. A novel metric for design of microstructure and mechanical properties in PBF-LB/M Ti6Al4V alloy. J. Mater. Process. Technol. 2025, 344, 119031.
10. Xu, W.; Brandt, M.; Sun, S.; et al. Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition. Acta Mater. 2015, 85, 74-84.
11. Xu, W.; Lui, E.; Pateras, A.; Qian, M.; Brandt, M. In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance. Acta Mater. 2017, 125, 390-400.
12. Zhang, J.; Liu, Y.; Bayat, M.; et al. Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement. Scr. Mater. 2021, 191, 155-60.
13. Liu, Y.; Zhang, J.; Tan, Q.; Yin, Y.; Li, M.; Zhang, M. Mechanical performance of simple cubic architected titanium alloys fabricated via selective laser melting. Opt. Laser Technol. 2021, 134, 106649.
14. Zhang, J.; Liu, Y.; Sha, G.; et al. Designing against phase and property heterogeneities in additively manufactured titanium alloys. Nat. Commun. 2022, 13, 4660.
15. Pan, D.; Li, S.; Liu, L.; et al. Enhanced strength and ductility of nano-TiBw-reinforced titanium matrix composites fabricated by electron beam powder bed fusion using Ti6Al4V-TiBw composite powder. Addit. Manuf. 2022, 50, 102519.
16. Kumar, S.; Vijayan, S. R.; Nandwana, P.; Poplawsky, J. D.; Yan, C.; Babu, S. S. Role of thermo-mechanical gyrations on the α/β interface stability in a Ti6Al4V AM alloy. Scr. Mater. 2021, 204, 114134.
17. Shao, Z.; Wu, B.; Li, P.; Ma, W.; Tan, H.; Li, H. Mechanism of corrosion protection in reinforced Ti-6Al-4V alloy by wire arc additive manufacturing using magnetic arc oscillation. Mater. Charact. 2023, 199, 112844.
18. Wu, B.; Shao, Z.; Shao, D.; et al. Enhanced corrosion performance in Ti-6Al-4V alloy produced via wire-arc directed energy deposition with magnetic arc oscillation. Addit. Manuf. 2023, 66, 103465.
19. Huang, D.; Dong, Y.; Chen, H.; Zhou, Y.; Zhang, M.; Yan, M. Effects of processing parameters on a β-solidifying TiAl alloy fabricated by laser-based additive manufacturing. Microstructures 2022, 2, 2022019.
20. Yang, J.; Yu, H.; Yin, J.; Gao, M.; Wang, Z.; Zeng, X. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting. Mater. Des. 2016, 108, 308-18.
21. Chen, M.; Simonelli, M.; Van, Petegem. S.; et al. A quantitative study of thermal cycling along the build direction of Ti-6Al-4V produced by laser powder bed fusion. Mater. Des. 2023, 225, 111458.
22. Nishiyama, Z. 1 - Introduction to martensite and martensitic transformation. Martensitic Transformation. Elsevier; 1978. pp. 1-13.
23. Porter, D. A.; Easterling, K. E.; Sherif, M. Y. Phase transformations in metals and alloys, 4th ed. Boca Raton: CRC Press; 2021.
24. Qu, S.; Ding, J.; Fu, J.; Fu, M.; Zhang, B.; Song, X. High-precision laser powder bed fusion processing of pure copper. Addit. Manuf. 2021, 48, 102417.
25. Liu, Y.; Ren, J.; Guan, S.; et al. Microstructure and mechanical behavior of additively manufactured CoCrFeMnNi high-entropy alloys: Laser directed energy deposition versus powder bed fusion. Acta Mater. 2023, 250, 118884.
26. Li, Y. F.; Chen, C.; Ranabhat, J.; Shen, Y. F. Formation mechanism and mechanical properties of surface nanocrystallized Ti-6Al-4V alloy processed by surface mechanical attrition treatment. Rare Metals 2017, 42, 1343-52.
27. Chao, Y.; Liu, Y.; Xu, Z.; et al. Improving superficial microstructure and properties of the laser-processed ultrathin kerf in Ti-6Al-4V alloy by water-jet guiding. J. Mater. Sci. Technol. 2023, 156, 32-53.
28. Lu, F.; Ma, Q.; Liu, E.; et al. Advancements in understanding the microstructure and properties of additive manufacturing Ti-6Al-4V alloy: a comprehensive review. J. Alloys Compd. 2025, 1027, 180543.
29. Randle, V.; Rohrer, G.; Hu, Y. Five-parameter grain boundary analysis of a titanium alloy before and after low-temperature annealing. Scr. Mater. 2008, 58, 183-6.
30. Burgers, W. On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium. Physica 1934, 1, 561-86.
31. Farabi, E.; Hodgson, P. D.; Rohrer, G. S.; Beladi, H. Five-parameter intervariant boundary characterization of martensite in commercially pure titanium. Acta Mater. 2018, 154, 147-60.
32. Guo, Y.; Britton, T.; Wilkinson, A. Slip band-grain boundary interactions in commercial-purity titanium. Acta Mater. 2014, 76, 1-12.
33. Wang, H.; Chao, Q.; Yang, L.; et al. Introducing transformation twins in titanium alloys: an evolution of α-variants during additive manufacturing. Mater. Res. Lett. 2020, 9, 119-26.
34. Agnew, S.; Capolungo, L.; Calhoun, C. Connections between the basal I1 “growth” fault and <c+a? Acta Mater. 2015, 82, 255-65.
35. Clausen, B.; Tomé, C.; Brown, D.; Agnew, S. Reorientation and stress relaxation due to twinning: modeling and experimental characterization for Mg. Acta Mater. 2008, 56, 2456-68.
36. Beyerlein, I.; Mccabe, R.; Tomé, C. Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: a multi-scale modeling study. J. Mech. Phys. Solids 2011, 59, 988-1003.
37. Li, Y.; Dai, L.; Cao, Y.; Zhao, Y.; Zhu, Y. Grain size effect on deformation twin thickness in a nanocrystalline metal with low stacking-fault energy. J. Mater. Res. 2019, 34, 2398-405.
38. Lloyd, J. T. A dislocation-based model for twin growth within and across grains. Proc. Math. Phys. Eng. Sci. 2018, 474, 20170709.
40. Li, K.; Liu, X.; Liu, Y.; et al. Strengthening layer with nano-twins in titanium alloy induced by laser surface re-melting: mechanism of high strength and ductility. Mater. Charact. 2023, 196, 112632.
41. Zhang, T.; Huang, Z.; Yang, T.; et al. In situ design of advanced titanium alloy with concentration modulations by additive manufacturing. Science 2021, 374, 478-82.
42. Vrancken, B.; Thijs, L.; Kruth, J.; Van, Humbeeck. J. Heat treatment of Ti6Al4V produced by Selective Laser Melting: microstructure and mechanical properties. J. Alloys Compd. 2012, 541, 177-85.
43. Lu, L.; Chen, X.; Huang, X.; Lu, K. Revealing the maximum strength in nanotwinned copper. Science 2009, 323, 607-10.
44. Lu, L.; Shen, Y.; Chen, X.; Qian, L.; Lu, K. Ultrahigh strength and high electrical conductivity in copper. Science 2004, 304, 422-6.
45. Lu, K.; Lu, L.; Suresh, S. Strengthening materials by engineering coherent internal boundaries at the nanoscale. Science 2009, 324, 349-52.
46. Wen, T.; Liu, A.; Wang, R.; et al. Modelling of dislocations, twins and crack-tips in HCP and BCC Ti. Int. J. Plast. 2023, 166, 103644.
47. Zhang, Z.; Sheng, H.; Wang, Z.; et al. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy. Nat. Commun. 2017, 8, 14390.
48. Wang, H.; Xu, D.; Yang, R. Atomic modelling of crack initiation on twin boundaries in α-titanium under external tensile loading along various orientations. Philos. Mag. Lett. 2014, 94, 779-85.
49. Zhao, S.; Zhang, R.; Yu, Q.; Ell, J.; Ritchie, R. O.; Minor, A. M. Cryoforged nanotwinned titanium with ultrahigh strength and ductility. Science 2021, 373, 1363-8.
50. Lin, X.; Han, W. Achieving strength-ductility synergy in zirconium via ultra-dense twin-twin networks. Acta Mater. 2024, 269, 119825.
51. Huang, S.; Zhao, Q.; Zhao, Y.; et al. Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys. J. Mater. Sci. Technol. 2021, 79, 147-64.
52. Vilaro, T.; Colin, C.; Bartout, J. D. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metall. Mater. Trans. A 2011, 42, 3190-9.
53. Su, J.; Ji, X.; Liu, J.; et al. Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy. J. Mater. Sci. Technol. 2022, 107, 136-48.
