REFERENCES
1. Zheng, C.; Yu, W. Effect of low-temperature on mechanical behavior for an AISI 304 austenitic stainless steel. Mater. Sci. Eng. A. 2018, 710, 359-65.
2. Wang, P.; Xu, Z.; Zhang, P.; et al. The highest fatigue strength for steels. Acta. Mater. 2025, 289, 120888.
3. Xu, Z.; Su, X.; Zhang, P.; et al. How high can the fatigue strength of metals be achieved? Natl. Sci. Rev. 2025, 12, nwaf332.
4. Wang, D.; Wang, Q.; Li, X.; Zhang, Z. Improving fatigue properties of 316L stainless steel welded joints by surface spinning strengthening. Acta. Metall. Sin. 2024, 37, 840-54.
5. Sgobba, S.; Dalin, J.; Langeslag, S. A. E.; et al. Qualification of structural stainless steel products for the ITER correction coil cases. Fusion. Eng. Des. 2017, 124, 980-4.
6. Xie, L.; Zhang, H.; Xin, J.; et al. Cryogenic spatiotemporal characteristics and microevolution of 316LN discontinuous plastic flow. Commun. Mater. 2025, 6, 159.
7. Xin, J.; Zhang, H.; Sun, W.; et al. Microstructure evolution of austenitic stainless steels under high-cycle-fatigue loading at deep cryogenic temperature. Scr. Mater. 2023, 226, 115223.
8. Li, J.; Zhou, Z.; Wang, S.; et al. Deformation mechanisms and enhanced mechanical properties of 304L stainless steel at liquid nitrogen temperature. Mater. Sci. Eng. A. 2020, 798, 140133.
9. Schneider, M.; Laplanche, G. Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy. Acta. Mater. 2021, 204, 116470.
10. Xiong, H.; Li, Y.; Xu, C.; Li, W.; Jia, X. Influences of dislocation configuration and texture optimization on obtaining exceptional cryogenic strength-ductility synergy in a dynamic-recovered heterogeneous high-manganese steel. Int. J. Plast. 2025, 185, 104225.
11. Byun, T.; Hashimoto, N.; Farrell, K. Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels. Acta. Mater. 2004, 52, 3889-99.
12. Obst, B.; Nyilas, A. Experimental evidence on the dislocation mechanism of serrated yielding in f.c.c. metals and alloys at low temperatures. Mater. Sci. Eng. A. 1991, 137, 141-50.
13. Skoczeń, B.; Bielski, J.; Tabin, J. Multiaxial constitutive model of discontinuous plastic flow at cryogenic temperatures. Int. J. Plast. 2014, 55, 198-218.
14. Madivala, M.; Schwedt, A.; Wong, S. L.; Roters, F.; Prahl, U.; Bleck, W. Temperature dependent strain hardening and fracture behavior of TWIP steel. Int. J. Plast. 2018, 104, 80-103.
15. Xin, J.; Zhang, H.; Lyu, B.; et al. Mechanical performance and deformation mechanisms of ultrastrong yield strength Fe-Cr-Ni-Mn-N austenitic stainless steel at 4.2 Kelvin. J. Mater. Sci. Technol. 2024, 189, 191-202.
16. Cui, C.; Weng, Z.; Gu, K.; Zhang, M.; Wang, J.; Zhang, Y. The strengthening role of post-welded cryogenic treatment on the performance and microstructure of 304 austenitic stainless steel weldments. J. Mater. Res. Technol. 2024, 29, 5576-84.
17. Ma, Y.; Naeem, M.; Zhu, L.; et al. Microscopic insights of the extraordinary work-hardening due to phase transformation. Acta. Mater. 2024, 270, 119822.
18. Li, X.; Ding, W.; Cao, J.; Ye, L.; Chen, J. In situ TEM observation on martensitic transformation during tensile deformation of SUS304 metastable austenitic stainless steel. Acta. Metall. Sin. 2015, 28, 302-6.
19. Liu, J.; Luo, X.; Huang, B.; et al. Nano-twinning and martensitic transformation behaviors in 316L austenitic stainless steel during large tensile deformation. Acta. Metall. Sin. 2022, 36, 758-70.
20. Zhao, Y.; Peng, K.; Wen, W.; et al. Coupled effects of TRIP and TWIP in metastable austenitic stainless steel via optimization of stacking fault energy. Mater. Charact. 2025, 220, 114656.
21. Shao, C.; Zhang, P.; Zhu, Y.; Zhang, Z.; Pang, J.; Zhang, Z. Improvement of low-cycle fatigue resistance in TWIP steel by regulating the grain size and distribution. Acta. Mater. 2017, 134, 128-42.
22. Liu, C.; Dong, W.; Sun, J.; Lu, S. Effect of precipitation behavior and deformation twinning evolution on the mechanical properties of 16Cr-25.5Ni-4.2Mo superaustenitic stainless steel weld metals. Acta. Metall. Sin. 2024, 38, 338-52.
23. Zhang, H.; Huang, C.; Huang, R.; Li, L. Influence of pre-strain on cryogenic tensile properties of 316LN austenitic stainless steel. Cryogenics 2020, 106, 103058.
24. Sakurai, T.; Umezawa, O. Fracture toughness and martensitic transformation in type 316LN austenitic stainless steel extra-thick plates at 4.2 K. Mater. Sci. Eng. A. 2023, 862, 144122.
25. Wu, S.; Xin, J.; Xie, W.; et al. Mechanical properties and microstructure evolution of cryogenic pre-strained 316LN stainless steel. Cryogenics 2022, 121, 103388.
26. Liu, X.; Feng, H.; Wang, J.; et al. Mechanical property comparisons between CrCoNi medium-entropy alloy and 316 stainless steels. J. Mater. Sci. Technol. 2022, 108, 256-69.
27. Li, X.; Wei, Z.; Wang, X.; et al. Effect of cryogenic temperatures on the mechanical behavior and deformation mechanism of AISI 316H stainless steel. J. Mater. Res. Technol. 2023, 22, 3375-86.
28. Huang, M.; Wang, L.; Wang, C.; et al. Optimizing crack initiation energy in austenitic steel via controlled martensitic transformation. J. Mater. Sci. Technol. 2024, 198, 231-42.
29. Mao, W.; Gao, S.; Gong, W.; et al. Martensitic transformation-governed Lüders deformation enables large ductility and late-stage strain hardening in ultrafine-grained austenitic stainless steel at low temperatures. Acta. Mater. 2024, 278, 120233.
30. Li, S.; Withers, P. J.; Kabra, S.; Yan, K. The behaviour and deformation mechanisms for 316L stainless steel deformed at cryogenic temperatures. Mater. Sci. Eng. A. 2023, 880, 145279.
31. Son, K.; Jeon, S.; Paul, B. K.; Na, Y.; Lee, K.; Kim, Y. Extremely low temperature mechanical behavior of in-situ oxide containing 304L stainless steel fabricated by laser powder bed fusion. J. Mater. Sci. Technol. 2025, 234, 319-34.
32. Singh, C.; Lee, T.; Lee, K. H.; et al. Exceptional fatigue-resistant austenitic stainless steel for cryogenic applications. Appl. Mater. Today. 2024, 38, 102195.
33. Fu, Y.; Liu, Q.; Lv, Y.; et al. Microstructural and chemical dependences of fracture toughness in stainless steel welds at 4.2 K. Eng. Fract. Mech. 2024, 305, 110207.
34. Xin, J.; Fang, C.; Huang, C.; et al. Analysis of the fracture mechanism at cryogenic temperatures of thick 316LN laser welded joints. Fusion. Eng. Des. 2019, 148, 111277.
35. Mohanty, S.; Mukherjee, M.; Mandal, C.; et al. Understanding the microstructural evolution and tensile characteristics of low nickel austenitic stainless-steel welds fabricated by diode LASER. Int. J. Press. Vessel. Pip. 2023, 206, 105087.
36. Choudhury, B.; Singh, V.; Selvarajan, L.; Goel, S.; Chandrasekaran, M. Synergic investigation of microstructure, precipitation, and micro-segregation on inconel 825 weldments: a comparative study between GTAW and EBW. Mater. Chem. Phys. 2024, 318, 129249.
37. Qu, Z.; Zhang, Z.; Liu, R.; et al. High fatigue resistance in a titanium alloy via near-void-free 3D printing. Nature 2024, 626, 999-1004.
38. Gao, S.; Li, Z.; Van Petegem, S.; et al. Additive manufacturing of alloys with programmable microstructure and properties. Nat. Commun. 2023, 14, 6752.
39. Zhou, Y.; Shen, C.; Shi, H.; et al. Accurate determination of active slip systems using a novel lattice rotation analysis: quasi-in-situ EBSD/ECCI study on the homogeneous/heterogeneous deformation of polycrystalline zirconium. Materialia 2024, 36, 102176.
40. An, D.; Zaefferer, S. Formation mechanism of dislocation patterns under low cycle fatigue of a high-manganese austenitic TRIP steel with dominating planar slip mode. Int. J. Plast. 2019, 121, 244-60.
41. Wang, X.; He, P.; Zhou, Q.; et al. Effects of laser welding on the microstructure evolution and corrosion resistance of a novel nitrogen-containing austenitic stainless steel QN2109. J. Mater. Res. Technol. 2023, 24, 303-17.
42. Zhang, Z.; Li, Z.; He, Y.; Song, G.; Liu, L. The effect of low-power laser on micro-forming of 316 stainless steel additive manufacturing part. J. Manuf. Process. 2021, 68, 583-601.
43. Wang, Y. M.; Voisin, T.; Mckeown, J. T.; et al. Additively manufactured hierarchical stainless steels with high strength and ductility. Nat. Mater. 2017, 17, 63-71.
44. Gao, L.; Chen, Y.; Zhang, X.; Agnew, S. R.; Chuang, A. C.; Sun, T. Evolution of dislocations during the rapid solidification in additive manufacturing. Nat. Commun. 2025, 16, 4696.
45. Bertsch, K.; Meric De Bellefon, G.; Kuehl, B.; Thoma, D. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L. Acta. Mater. 2020, 199, 19-33.
46. Singh, B. P.; Sahoo, J. R.; Mishra, S. Elucidating the role of combined latent hardening due to slip-slip and slip-twin interaction for modeling the evolution of crystallographic texture in high nitrogen steels. Int. J. Plast. 2025, 185, 104215.
47. Shao, C.; Zhang, P.; Liu, R.; et al. A remarkable improvement of low-cycle fatigue resistance of high-Mn austenitic TWIP alloys with similar tensile properties: importance of slip mode. Acta. Mater. 2016, 118, 196-212.
48. Shen, S.; Xie, P.; Wu, C.; Luo, J.; Ye, H.; Chen, J. Cross-slip of extended dislocations and secondary deformation twinning in a high-Mn TWIP steel. Int. J. Plast. 2024, 175, 103922.
49. Vivekanandan, V.; Anglin, B.; El-azab, A. A data driven approach for cross-slip modelling in continuum dislocation dynamics. Int. J. Plast. 2023, 164, 103597.
50. Zhang, J.; Cao, G.; Gu, Z.; Wang, Z.; Jin, Y.; Liu, J. The modified Swift constitutive model of 304L stainless steel at the cryogenic temperature based on the Olson-Cohen model. Eng. Fract. Mech. 2024, 307, 110336.
51. Zou, Y.; Gao, Q.; Ding, H.; Zhang, Y.; Tang, Z. Investigations on austenite stability and martensitic transformation kinetics of a medium Mn steel under different strain states. Int. J. Plast. 2023, 171, 103788.
52. Lu, S.; Wang, Q.; Yao, T.; et al. Simultaneous improvement of strength and plasticity: nano-twin construction for a novel high-nitrogen TWIP steel. Int. J. Plast. 2024, 183, 104144.
53. Ishtiaq, M.; Kim, Y.; Tiwari, S.; et al. Serration-induced plasticity in phase transformative stainless steel 316L upon ultracold deformation at 4.2 K. Mater. Sci. Eng. A. 2025, 921, 147591.
54. Xie, L.; Zhang, H.; Wu, S.; et al. Development of two-dimensional temperature field solution method based on the stress-strain response of 316LN stainless steel at cryogenic temperatures. Cryogenics 2023, 133, 103713.
55. De Cooman, B. C.; Estrin, Y.; Kim, S. K. Twinning-induced plasticity (TWIP) steels. Acta. Mater. 2018, 142, 283-362.
56. Hong, C.; Lu, Y.; Zheng, H.; Li, Z.; Guo, G. Uniaxial tensile behaviors and Hall-Petch relationship of polycrystalline 316LN stainless steel via molecular dynamics simulation. Comput. Mater. Sci. 2024, 244, 113195.
57. Gordon, J.; Lim, R.; Wilkin, M.; Pagan, D.; Lebensohn, R.; Rollett, A. Evaluating the grain-scale deformation behavior of a single-phase FCC high entropy alloy using synchrotron high energy diffraction microscopy. Acta. Mater. 2021, 215, 117120.
58. Wang, X.; Tian, J.; Li, S.; He, P.; Fang, N.; Wen, G. Weldability of high nitrogen steels: a review. Rev. Adv. Mater. Sci. 2023, 62, 20220325.
59. Liu, R.; Tian, Y.; Zhang, Z.; Zhang, P.; An, X.; Zhang, Z. Exploring the fatigue strength improvement of Cu-Al alloys. Acta. Mater. 2018, 144, 613-26.
60. Li, P.; Li, S.; Wang, Z.; Zhang, Z. Unified factor controlling the dislocation evolution of fatigued face-centered cubic crystals. Acta. Mater. 2017, 129, 98-111.
61. Shih, M.; Miao, J.; Mills, M.; Ghazisaeidi, M. Stacking fault energy in concentrated alloys. Nat. Commun. 2021, 12, 3590.
