REFERENCES
1. Zhong, K.; Sun, P.; Xu, H. Advances in defect engineering of metal oxides for photocatalytic CO2 reduction. Small 2025, 21, 2310677.
2. Kim, J. H.; Kim, J.; Ma, J.; et al. Spontaneous metal-chelation strategy for highly dense Ni single-atom catalysts with asymmetric coordination in CO2 electroreduction. Small 2025, 21, 2409481.
3. Ma, J.; Lee, W.; Kim, J. H.; et al. Leveraging the intermetal distance in dual-atom catalysts: revealing optimized synergistic interactions for CO2 electroreduction. ACS. Nano. 2025, 19, 18698-707.
4. Oni, A. M.; Mohsin, A. S.; Rahman, M. M.; Bhuian, M. B. H. A comprehensive evaluation of solar cell technologies, associated loss mechanisms, and efficiency enhancement strategies for photovoltaic cells. Energy. Rep. 2024, 11, 3345-66.
5. Jang, W. J.; Park, P. J.; Ma, J.; Kim, S. Y. Engineering perovskite solar cells for photovoltaic and photoelectrochemical systems: strategies for enhancing efficiency and stability. Chem. Commun. 2025, 61, 8137-56.
6. Sabatino M, Hendawi R, Garcia AS. Silicon solar cells: trends, manufacturing challenges, and AI perspectives. Crystals 2024, 14, 167.
7. Khokhar, M. Q.; Yousuf, H.; Jeong, S.; et al. A review on p-type tunnel oxide passivated contact (TOPCon) solar cell. Trans. Electr. Electron. Mater. 2023, 24, 169-77.
8. Rehman, Z. U.; Lin, Z. Inorganic M3ACl3 (M=Ca, Sr, Ba, A=N, P, As) perovskite-derivatives for next-generation solar cells and optoelectronics: in-depth analysis of stability, optoelectronic features, and temperature-dependent carrier mobilities. J. Mater. Chem. A. 2025, 13, 34469-92.
9. Wang, J.; Feng, Y.; He, Y. Advancements in recycling technologies for waste CIGS photovoltaic modules. Nano. Energy. 2024, 128, 109847.
10. Camargo, P. S. S.; Petroli, P. A.; de, Souza. R. A.; et al. CdTe photovoltaic technology: an overview of waste generation, recycling, and raw material demand. Curr. Opin. Green. Sustain. Chem. 2024, 47, 100904.
11. Shah, U. A.; Wang, A.; Irfan, Ullah. M.; et al. A deep dive into Cu2ZnSnS4 (CZTS) solar cells: a review of exploring roadblocks, breakthroughs, and shaping the future. Small 2024, 20, 2310584.
12. Mahboob, S.; Rizwana,
13. Hedibi, A.; Gueddim, A.; Bentria, B. Numerical modeling and optimization of ZnO: Al/iZnO/ZnMgO/CZTS photovoltaic solar cell. Trans. Electr. Electron. Mater. 2021, 22, 666-72.
14. Zyoud, S. H.; Zyoud, A. H.; Ahmed, N. M.; Abdelkader, A. F. Numerical modelling analysis for carrier concentration level optimization of CdTe heterojunction thin film-based solar cell with different non-toxic metal chalcogenide buffer layers replacements: using SCAPS-1D software. Crystals 2021, 11, 1454.
15. Yi, J.; Zhang, G.; Yu, H.; Yan, H. Advantages, challenges and molecular design of different material types used in organic solar cells. Nat. Rev. Mater. 2024, 9, 46-62.
16. Ding, P.; Yang, D.; Yang, S.; Ge, Z. Stability of organic solar cells: toward commercial applications. Chem. Soc. Rev. 2024, 53, 2350-87.
17. Lee, J. W.; Park, J. S.; Jeon, H.; et al. Recent progress and prospects of dimer and multimer acceptors for efficient and stable polymer solar cells. Chem. Soc. Rev. 2024, 53, 4674-706.
18. Sorrentino, R.; Kozma, E.; Luzzati, S.; Po, R. Interlayers for non-fullerene based polymer solar cells: distinctive features and challenges. Energy. Environ. Sci. 2021, 14, 180-223.
19. Kojima, A.; Teshima, K.; Shirai, Y.; Miyasaka, T. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 2009, 131, 6050-1.
20. Zhang, X.; Wu, S.; Zhang, H.; et al. Advances in inverted perovskite solar cells. Nat. Photonics. 2024, 18, 1243-53.
21. Wu, T.; Qin, Z.; Wang, Y.; et al. The main progress of perovskite solar cells in 2020-2021. Nano. Micro. Lett. 2021, 13, 152.
22. Kothandaraman, R. K.; Jiang, Y.; Feurer, T.; et al. Near-infrared-transparent perovskite solar cells and perovskite-based tandem photovoltaics. Small. Methods. 2020, 4, 2000395.
23. Wang, S.; Wang, A.; Hao, F. Toward stable lead halide perovskite solar cells: a knob on the A/X sites components. iScience 2022, 25, 103599.
24. Miah, M. H.; Khandaker, M. U.; Rahman, M. B.; et al. Band gap tuning of perovskite solar cells for enhancing the efficiency and stability: issues and prospects. RSC. Adv. 2024, 14, 15876-906.
25. Han, J.; Park, K.; Tan, S.; et al. Perovskite solar cells. Nat. Rev. Methods. Primers. 2025, 5, 3.
26. Green, M. A.; Dunlop, E. D.; Yoshita, M.; et al. Solar cell efficiency tables (version 64). Prog. Photovolt. Res. Appl. 2024, 32, 425-41.
27. Aydin, E.; Allen, T. G.; De, Bastiani. M.; et al. Pathways toward commercial perovskite/silicon tandem photovoltaics. Science 2024, 383, eadh3849.
28. Yang, G.; Deng, C.; Li, C.; et al. Towards efficient, scalable and stable perovskite/silicon tandem solar cells. Nat. Photonics. 2025, 19, 913-24.
29. Chao, L.; Niu, T.; Gao, W.; et al. Solvent engineering of the precursor solution toward large-area production of perovskite solar cells. Adv. Mater. 2021, 33, 2005410.
30. Yang, F.; Jang, D.; Dong, L.; et al. Upscaling solution-processed perovskite photovoltaics. Adv. Energy. Mater. 2021, 11, 2101973.
31. Wang, C.; Nie, R.; Dai, Y.; et al. Enhancing the inherent stability of perovskite solar cells through chalcogenide-halide combinations. Energy. Environ. Sci. 2024, 17, 1368-86.
32. Kore, B. P.; Jamshidi, M.; Gardner, J. M. The impact of moisture on the stability and degradation of perovskites in solar cells. Mater. Adv. 2024, 5, 2200-17.
33. Mesquita, I.; Andrade, L.; Mendes, A. Effect of relative humidity during the preparation of perovskite solar cells: performance and stability. Sol. Energy. 2020, 199, 474-83.
34. Huang, P. C.; Yang, T. J.; Lin, C. J.; et al. Unraveling the heat- and UV-induced degradation of mixed halide perovskite thin films via surface analysis techniques. Langmuir 2024, 40, 11873-87.
35. Song, J.; Liu, H.; Pu, W.; et al. Thermal instability originating from the interface between organic-inorganic hybrid perovskites and oxide electron transport layers. Energy. Environ. Sci. 2022, 15, 4836-49.
36. Tang, J.; Tian, W.; Zhao, C.; et al. Imaging the moisture-induced degradation process of 2D organolead halide perovskites. ACS. Omega. 2022, 7, 10365-71.
37. Ma, H.; Ahn, E.; Lee, D.; et al. Water-induced degradation mechanism of metal halide perovskite nanocrystals. Matter 2025, 8, 102083.
38. Zhou, P.; Liu, Q.; Zhang, Z. Coupled modeling of solvent evaporation and thin film evolution in spin coating. Appl. Therm. Eng. 2025, 279, 127662.
39. Sin, J.; Kim, H.; Kim, M.; et al. Anti-solvent treatment time approach to high efficiency perovskite solar cells with temperature of coating environmental. Sol. Energy. Mater. Sol. Cells. 2023, 250, 112054.
40. Wang, T.; Zhang, T.; Zhang, J.; et al. Additive-regulated one-step dynamic spin-coating for fabricating high-performance perovskite solar cells under high humidity conditions. J. Mater. Chem. C. 2024, 12, 913-21.
41. Al-Katrib, M.; Perrin, L.; Flandin, L.; Planes, E. Electrodeposition in perovskite solar cells: a critical review, new insights, and promising paths to future industrial applications. Adv. Mater. Technol. 2023, 8, 2300964.
42. Njema, G. G.; Kibet, J. K.; Ngari, S. M. A review of interface engineering characteristics for high performance perovskite solar cells. Measurement. Energy. 2024, 2, 100005.
43. Jang, W. J.; Kim, E. H.; Cho, J. H.; et al. Elucidating the role of alkali metal carbonates in impact on oxygen vacancies for efficient and stable perovskite solar cells. Adv. Sci. 2024, 11, 2406657.
44. Cao, Y.; Yan, N.; Wang, M.; et al. Designed additive to regulated crystallization for high performance perovskite solar cell. Angew. Chem. Int. Ed. 2024, 63, e202404401.
45. Azam, M.; Ke, Z.; Luo, J.; et al. Additive engineering enabled non-radiative defect passivation with improved moisture-resistance in efficient and stable perovskite solar cells. Chem. Eng. J. 2024, 483, 149424.
46. He, Z.; Peng, C.; Guo, R.; et al. High-efficiency and emission-tunable inorganic blue perovskite light-emitting diodes based on vacuum deposition. Small 2024, 20, 2305379.
47. Liu, L.; Yang, S. E.; Liu, P.; Chen, Y. High-quality and full-coverage CsPbBr3 thin films via electron beam evaporation with post-annealing treatment for all-inorganic perovskite solar cells. Sol. Energy. 2022, 232, 320-7.
48. Xu, Z.; Chin, S. H.; Park, B. I.; et al. Advancing perovskite solar cell commercialization: bridging materials, vacuum deposition, and AI-assisted automation. Next. Mater. 2024, 3, 100103.
49. Zhou, C.; Meng, W.; Kong, L.; et al. Vacuum processed metal halide perovskite light-emitting diodes. Adv. Funct. Mater. 2024, 34, 2307682.
50. Tong, G.; Zhang, J.; Bu, T.; et al. Holistic strategies lead to enhanced efficiency and stability of hybrid chemical vapor deposition based perovskite solar cells and modules. Adv. Energy. Mater. 2023, 13, 2300153.
51. Lee, J. H.; Kim, B. S.; Park, J.; et al. Opportunities and challenges for perovskite solar cells based on vacuum thermal evaporation. Adv. Mater. Technol. 2023, 8, 2200928.
52. Soto-Montero, T.; Kralj, S.; Azmi, R.; et al. Single-source pulsed laser-deposited perovskite solar cells with enhanced performance via bulk and 2D passivation. Joule 2024, 8, 3412-25.
53. Zhao, R.; Mao, P.; Lv, J.; et al. Atomic layer deposition processed interlayers in photovoltaics: applications, challenges and perspectives. J. Energy. Chem. 2025, 109, 702-25.
54. Asare, G. K.; Adu, J. S.; Shin, B.; et al. Perspective: atomic layer deposition strategies for surface passivation of metal-halide perovskite absorbers. Electron. Mater. Lett. 2025, 21, 331-6.
55. Zhang, J.; Li, Y.; Cao, K.; Chen, R. Advances in atomic layer deposition. Nanomanuf. Metrol. 2022, 5, 191-208.
56. Yasmeen, S.; Ryu, S. W.; Lee, S. H.; Lee, H. B. R. Atomic layer deposition beyond thin film deposition technology. Adv. Mater. Technol. 2023, 8, 2200876.
57. Tran, V. H. A.; Lims, S. C.; Anwar, N.; et al. Atomic layer deposition of metal and metal oxides: mechanisms, challenges, and future prospects. J. Alloys. Compd. 2025, 1041, 183864.
58. Park, H. H.; Fermin, D. J. Recent developments in atomic layer deposition of functional overlayers in perovskite solar cells. Nanomaterials 2023, 13, 3112.
59. Menon, V. S.; Krishnamoorthy, A. Hole selectivity of n-type molybdenum oxide carrier selective layer for commercial and emerging thin-film photovoltaics: a critical analysis of interface energetics and ensuant device physics. Energy. Technol. 2023, 11, 2300608.
60. Zhang, C.; Pei, K.; Sheng, T.; et al. Metal oxides engineering: toward sustainable superhydrophobic surfaces. Adv. Funct. Mater. 2025, 36, e12239.
61. Sambathkumar, C.; Nagavenkatesh, K.; Thangavel, R.; et al. Investigation and comparative studies on charge storage performance in nanostructured RuO2, NiO and Co3O4 nanoparticles for high dense energy storage. Electron. Mater. Lett. 2024, 20, 571-83.
62. Singh, R.; Ghosh, S.; Subbiah, A. S.; et al. ALD Al2O3 on hybrid perovskite solar cells: unveiling the growth mechanism and long-term stability. Sol. Energy. Mater. Sol. Cells. 2020, 205, 110289.
63. Liu, Y.; Sang, B.; Hossain, M. A.; et al. A novel passivating electron contact for high-performance silicon solar cells by ALD Al-doped TiO2. Sol. Energy. 2021, 228, 531-9.
64. Di, Mario. L.; Garcia, Romero. D.; Wang, H.; et al. Outstanding fill factor in inverted organic solar cells with SnO2 by atomic layer deposition. Adv. Mater. 2024, 36, 2301404.
65. Kim, H. M.; Kim, D. G.; Kim, Y. S.; et al. Atomic layer deposition for nanoscale oxide semiconductor thin film transistors: review and outlook. Int. J. Extreme. Manuf. 2023, 5, 012006.
66. Gurbandurdyyev, G.; Mistry, K.; Delumeau, L. V.; et al. Robust, conformal ZnO coatings on fabrics via atmospheric-pressure spatial atomic layer deposition with in-situ thickness control. ChemNanoMat 2023, 9, e202200498.
67. Li, B.; Härtel, M.; Al-Ashouri, A.; et al. Atomic-layer-deposition-free monolithic perovskite/silicon tandem solar cell reaching 29.91% power conversion on industrial PERX/TOPCon-like silicon bottom cells. ACS. Energy. Lett. 2024, 9, 4550-6.
68. Lee, S. U.; Kim, S. Y.; Lee, J. H.; et al. Artificial synapse based on a δ-FAPbI3/atomic-layer-deposited SnO2 bilayer memristor. Nano. Lett. 2024, 24, 4869-76.
69. Li, R.; Li, N.; Hou, J.; et al. Aquatic environment remediation by atomic layer deposition-based multi-functional materials: a review. J. Hazard. Mater. 2021, 402, 123513.
70. Richey, N. E.; de, Paula. C.; Bent, S. F. Understanding chemical and physical mechanisms in atomic layer deposition. J. Chem. Phys. 2020, 152, 040902.
71. Jan, A.; Tanis-Kanbur, M. B.; Rietveld, L. C.; Heijman, S. G. J. A review on atomically modified materials by atomic layer deposition for wastewater treatment. Open. Ceram. 2025, 22, 100780.
72. Yarbrough, J.; Shearer, A. B.; Bent, S. F. Next generation nanopatterning using small molecule inhibitors for area-selective atomic layer deposition. J. Vac. Sci. Technol. A. 2021, 39, 021002.
73. Paek, S.; Schouwink, P.; Athanasopoulou, E. N.; et al. From nano- to micrometer scale: the role of antisolvent treatment on high performance perovskite solar cells. Chem. Mater. 2017, 29, 3490-8.
74. Ma, Y.; Liu, C.; Zhang, M.; Mai, Y. Review on the effects of solvent physical properties on the performance of slot-die coated perovskite solar cells. Surf. Sci. Technol. 2024, 2, 25.
75. Taylor, A. D.; Sun, Q.; Goetz, K. P.; et al. A general approach to high-efficiency perovskite solar cells by any antisolvent. Nat. Commun. 2021, 12, 1878.
76. Nattoo, C. A.; Peña, T.; Nassiri, Nazif. K.; et al. Optoelectronic properties of atomic layer deposited and sputtered MoS2 films. ACS. Appl. Mater. Interfaces. 2025, 17, 47347-54.
77. Zhao, W.; Duan, Y. Advanced applications of atomic layer deposition in perovskite-based solar cells. Adv. Photonics. Res. 2021, 2, 2100011.
78. Armstrong, C.; Delumeau, L. V.; Muñoz-Rojas, D.; et al. Tuning the band gap and carrier concentration of titania films grown by spatial atomic layer deposition: a precursor comparison. Nanoscale. Adv. 2021, 3, 5908-18.
79. Dutta, T.; Yadav, N.; Wu, Y.; et al. Electronic properties of 2D materials and their junctions. Nano. Mater. Sci. 2024, 6, 1-23.
80. Nguyen, C. T.; Cho, E. H.; Gu, B.; et al. Gradient area-selective deposition for seamless gap-filling in 3D nanostructures through surface chemical reactivity control. Nat. Commun. 2022, 13, 7597.
81. Choi, D. W.; Maeng, W. J.; Park, J. S. The conducting tin oxide thin films deposited via atomic layer deposition using tetrakis-dimethylamino tin and peroxide for transparent flexible electronics. Appl. Surf. Sci. 2014, 313, 585-90.
82. Qiu, S.; Amaro, A.; Fabulyak, D.; et al. Impact of tetrakis(dimethylamido)tin(IV) degradation on atomic layer deposition of tin oxide films and perovskite solar cells. Small 2025, 21, 2404966.
83. Sheng, J.; Han, K. L.; Hong, T.; et al. Review of recent progresses on flexible oxide semiconductor thin film transistors based on atomic layer deposition processes. J. Semicond. 2018, 39, 011008.
84. Hong, T.; Kim, H. W.; Kim, Y. S.; et al. Plasma-enhanced atomic layer deposition assisted low-temperature synthetic routes to rationally designed metastable C-axis aligned hexagonal In-Zn-O. Chem. Mater. 2023, 35, 5168-76.
85. Lee, S.; Kim, M.; Mun, G.; et al. Effects of Al precursors on the characteristics of indium-aluminum oxide semiconductor grown by plasma-enhanced atomic layer deposition. ACS. Appl. Mater. Interfaces. 2021, 13, 40134-44.
86. Wang, C.; Zhao, D.; Grice, C. R.; et al. Low-temperature plasma-enhanced atomic layer deposition of tin oxide electron selective layers for highly efficient planar perovskite solar cells. J. Mater. Chem. A. 2016, 4, 12080-7.
87. Wang, H.; Zhao, Y.; Wang, Z.; et al. Hermetic seal for perovskite solar cells: an improved plasma enhanced atomic layer deposition encapsulation. Nano. Energy. 2020, 69, 104375.
88. Preischel, F.; Zanders, D.; Berning, T.; et al. Interplay of precursor and plasma for the deposition of HfO2 via PEALD: film growth and dielectric properties. Adv. Mater. Interfaces. 2023, 10, 2300244.
89. Xu, L.; Zhang, Z.; Yang, L.; Yang, J.; Wang, P.; Gao, G.; et al. Comparison of thermal, plasma-enhanced and layer by layer Ar plasma treatment atomic layer deposition of tin oxide thin films. J. Cryst. Growth. 2021, 572, 126264.
90. Oviroh, P. O.; Akbarzadeh, R.; Pan, D.; Coetzee, R. A. M.; Jen, T. C. New development of atomic layer deposition: processes, methods and applications. Sci. Technol. Adv. Mater. 2019, 20, 465-96.
91. Sønsteby, H. H.; Yanguas-Gil, A.; Elam, J. W. Consistency and reproducibility in atomic layer deposition. J. Vac. Sci. Technol. A. 2020, 38, 020804.
92. Poodt, P.; Cameron, D. C.; Dickey, E.; et al. Spatial atomic layer deposition: a route towards further industrialization of atomic layer deposition. J. Vac. Sci. Technol. A. 2012, 30, 010802.
93. Asgarimoghaddam, H.; Chen, Q.; Ye, F.; Shahin, A.; Song, B.; Musselman, K. P. Zinc aluminum oxide encapsulation layers for perovskite solar cells deposited using spatial atomic layer deposition. Small. Methods. 2024, 8, 2300995.
94. Yersak, A. S.; Sharma, K.; Wallas, J. M.; Dameron, A. A.; Li, X.; Yang, Y.; et al. Spatial atomic layer deposition for coating flexible porous Li-ion battery electrodes. J. Vac. Sci. Technol. A. 2018, 36, 01A123.
95. Muñoz-Rojas, D.; MacManus-Driscoll, J. Spatial atmospheric atomic layer deposition: a new laboratory and industrial tool for low-cost photovoltaics. Mater. Horiz. 2014, 1, 314-20.
96. Vale, J. P.; Sekkat, A.; Gheorghin, T.; et al. Can we rationally design and operate spatial atomic layer deposition systems for steering the growth regime of thin films? J. Phys. Chem. C. 2023, 127, 9425-36.
97. Jiang, X.; Shan, B.; Ma, G.; et al. Scalable deposition of SnO2 ETL via SALD for large-area inverted perovskite solar modules. Chem. Eng. J. 2025, 505, 159629.
98. Qian, J.; Xu, B.; Tian, W. A comprehensive theoretical study of halide perovskites ABX3. Org. Electron. 2016, 37, 61-73.
99. Li, C.; Lu, X.; Ding, W.; Feng, L.; Gao, Y.; Guo, Z. Formability of ABX3 (X = F, Cl, Br, I) halide perovskites. Acta. Cryst. B. Struct. Sci. 2008, 64, 702-7.
100. Sato, T.; Takagi, S.; Deledda, S.; Hauback, B. C.; Orimo, S. I. Extending the applicability of the Goldschmidt tolerance factor to arbitrary ionic compounds. Sci. Rep. 2016, 6, 23592.
101. Teo, S. H.; Ng, C. H.; Ng, Y. H.; Islam, A.; Hayase, S.; Taufiq-Yap, Y. H. Resolve deep-rooted challenges of halide perovskite for sustainable energy development and environmental remediation. Nano. Energy. 2022, 99, 107401.
102. Meloni, S.; Palermo, G.; Ashari-Astani, N.; Grätzel, M.; Rothlisberger, U. Valence and conduction band tuning in halide perovskites for solar cell applications. J. Mater. Chem. A. 2016, 4, 15997-6002.
103. Kusuma, F. J.; Widianto, E.; Wahyono,
104. Ko, P. K.; Ge, J.; Ding, P.; et al. The deepest blue: major advances and challenges in deep blue emitting quasi-2D and nanocrystalline perovskite LEDs. Adv. Mater. 2025, 37, 2407764.
105. Ji, L.; Zhang, X.; Zhang, T.; et al. Band alignment of Pb-Sn mixed triple cation perovskites for inverted solar cells with negligible hysteresis. J. Mater. Chem. A. 2019, 7, 9154-62.
106. Chen, L.; Yoo, J. W.; Hu, M.; Lee, S. U.; Seok, S. I. Intrinsic phase stability and inherent bandgap of formamidinium lead triiodide perovskite single crystals. Angew. Chem. Int. Ed. 2022, 61, e202212700.
107. Kaiser, W.; Hussain, K.; Singh, A.; et al. Defect formation and healing at grain boundaries in lead-halide perovskites. J. Mater. Chem. A. 2022, 10, 24854-65.
108. Guo, Z.; Wang, J.; Yin, W. J. Atomistic origin of lattice softness and its impact on structural and carrier dynamics in three dimensional perovskites. Energy. Environ. Sci. 2022, 15, 660-71.
109. Liu, Y.; Lv, W.; Feng, J.; et al. Emerging thermochromic perovskite materials: insights into fundamentals, recent advances and applications. Adv. Funct. Mater. 2024, 34, 2402234.
110. Wang, F.; Bai, S.; Tress, W.; Hagfeldt, A.; Gao, F. Defects engineering for high-performance perovskite solar cells. NPJ. Flex. Electron. 2018, 2, 22.
111. Baumann, F.; Raga, S. R.; Lira-Cantú, M. Monitoring the stability and degradation mechanisms of perovskite solar cells by in situ and operando characterization. APL. Energy. 2023, 1, 011501.
112. Wąsiak-Maciejak, A.; Przypis, Ł.; Żuraw, W.; et al. Compositional and interfacial engineering for improved light stability of flexible wide-bandgap perovskite solar cells. J. Mater. Chem. A. 2025, 13, 7335-46.
113. Wang, H.; Zhang, Z.; Wang, X.; Duan, L.; Luo, J. Phenyltrimethylammonium chloride additive for highly efficient and stable FAPbI3 perovskite solar cells. Nano. Energy. 2024, 123, 109423.
114. Heo, D. Y.; Jang, W. J.; Jeong, M. J.; Noh, J. H.; Kim, S. Y. Optimal solvents for interfacial solution engineering of perovskite solar cells. Sol. RRL. 2022, 6, 2200485.
115. Xu, C.; Hang, P.; Kan, C.; Guo, X.; Song, X.; Xu, C.; et al. Molecular ferroelectric self-assembled interlayer for efficient perovskite solar cells. Nat. Commun. 2025, 16, 835.
116. Li, S.; Li, X.; Dai, C.; He, W.; Shabdan, Y.; Guli, M. Research on the application of metal oxide buffer layers in perovskite solar cells. Chem. Eng. J. 2025, 521, 166935.
117. Park, H.; Jeong, S.; Kim, E.; Shin, S.; Shin, H. Hole-transporting vanadium-containing oxide (V2O5-x) interlayers enhance stability of α-FAPbI3-based perovskite solar cells (~23%). ACS. Appl. Mater. Interfaces. 2022, 14, 42007-17.
118. Dong, J.; Jia, J.; Shi, B.; Feng, X.; Wu, Y.; Lv, P.; et al. Cr2O3 interlayer at TiO2/perovskite interface propelling the efficiency improvement of perovskite solar cells. Surf. Interfaces. 2022, 29, 101761.
119. Li, H.; Gao, B.; Yang, L.; et al. Magnesium oxide buffer layer for over 32% efficiency four-terminal perovskite/silicon tandem solar cells. Adv. Energy. Mater. 2025, 15, 2501762.
120. Moumen, A.; Kumarage, G. C.; Comini, E. P-type metal oxide semiconductor thin films: synthesis and chemical sensor applications. Sensors 2022, 22, 1359.
121. Valadi, K.; Gharibi, S.; Taheri-Ledari, R.; Akin, S.; Maleki, A.; Shalan, A. E. Metal oxide electron transport materials for perovskite solar cells: a review. Environ. Chem. Lett. 2021, 19, 2185-207.
122. Zhou, G.; Luo, X.; Wang, Z.; et al. Recent progress on cross-linkable fullerene-based electron transport materials for perovskite solar cells. ChemSusChem 2025, 18, e202401629.
123. Kim, K.; Kim, M.; Lee, H.; Chung, D. W.; Kim, J. Multi-functional PEDOT:PSS as the efficient perovskite solar cells. Small 2024, 20, 2402341.
124. Arumugam, G. M.; Karunakaran, S. K.; Liu, C.; et al. Inorganic hole transport layers in inverted perovskite solar cells: a review. Nano. Select. 2021, 2, 1081-116.
125. Murugan, P.; Hu, T.; Hu, X.; Chen, Y. Advancements in organic small molecule hole-transporting materials for perovskite solar cells: past and future. J. Mater. Chem. A. 2022, 10, 5044-81.
126. Althumayri, M.; Das, R.; Banavath, R.; Beker, L.; Achim, A. M.; Ceylan, Koydemir. H. Recent advances in transparent electrodes and their multimodal sensing applications. Adv. Sci. 2024, 11, 2405099.
127. Wang, C.; Li, J.; Luo, C.; et al. SnO2-based resistive hydrogen gas sensor: a comprehensive review from performance to function optimization. Mater. Sci. Semicond. Process. 2025, 188, 109209.
128. Phogat, P.; Jha, R.; Singh, S. Harnessing ZnO morphologies in energy application and sustainable development. Phys. Scr. 2024, 99, 102004.
129. Chen, K. T.; Hsu, C. H.; Ren, F. B.; et al. Influence of annealing temperature of nickel oxide as hole transport layer applied for inverted perovskite solar cells. J. Vac. Sci. Technol. A. 2021, 39, 062401.
130. Patel, V. D.; Gupta, D. Solution-processed metal-oxide based hole transport layers for organic and perovskite solar cell: a review. Mater. Today. Commun. 2022, 31, 103664.
131. Wu, S.; Liu, M.; Jen, A. K. Y. Prospects and challenges for perovskite-organic tandem solar cells. Joule 2023, 7, 484-502.
132. Szabó, G.; Kamat, P. V. Spiro-OMeTAD: unique redox chemistry driving the hole transport. ACS. Energy. Lett. 2024, 10, 330-6.
133. Duan, Y.; Chen, Y.; Wu, Y.; Liu, Z.; Liu, S.; Peng, Q. A comprehensive review of organic hole-transporting materials for highly efficient and stable inverted perovskite solar cells. Adv. Funct. Mater. 2024, 34, 2315604.
134. Ouedraogo, N. A. N.; Odunmbaku, G. O.; Guo, B.; et al. Oxidation of spiro-OMeTAD in high-efficiency perovskite solar cells. ACS. Appl. Mater. Interfaces. 2022, 14, 34303-27.
135. Ahmad, N.; Yuan, J.; Zou, Y. One more step towards better stability of non-fullerene organic solar cells: advances, challenges, future perspectives, and the era of artificial intelligence. Energy. Environ. Sci. 2025, 18, 5093-158.
136. Kim, S.; Lee, S. H.; Jo, I. H.; Park, T. J.; Kim, J. H. Reduced leakage current in atomic-layer-deposited HfO2 thin films deposited at low temperature by in situ defect passivation. Appl. Surf. Sci. 2024, 645, 158790.
137. Yao, Q.; Song, H.; Zhang, M.; et al. Recent advances in semi-transparent perovskite solar cells: fabrication, structural engineering, applications, and future challenges. J. Mater. Chem. C. 2025, 13, 22059-103.
138. Chen, R.; Zhang, W.; Guan, X.; et al. Rear electrode materials for perovskite solar cells. Adv. Funct. Mater. 2022, 32, 2200651.
139. Brinkmann, K. O.; Gahlmann, T.; Riedl, T. Atomic layer deposition of functional layers in planar perovskite solar cells. Sol. RRL. 2020, 4, 1900332.
140. Kim, B. J.; Jang, J. H.; Kim, J.; Oh, K. S.; Choi, E. Y.; Park, N. Efficiency and stability enhancement of organic–inorganic perovskite solar cells through micropatterned Norland optical adhesive and polyethylene terephthalate encapsulation. Mater. Today. Commun. 2019, 20, 100537.
141. Wang, Y.; Ahmad, I.; Leung, T.; et al. Encapsulation and stability testing of perovskite solar cells for real life applications. ACS. Mater. Au. 2022, 2, 215-36.
142. Lv, Y.; Xu, P.; Ren, G.; et al. Low-temperature atomic layer deposition of metal oxide layers for perovskite solar cells with high efficiency and stability under harsh environmental conditions. ACS. Appl. Mater. Interfaces. 2018, 10, 23928-37.
143. Allen, O. J.; Kang, J.; Qian, S.; Hinsch, J. J.; Zhang, L.; Wang, Y. A theoretical review of passivation technologies in perovskite solar cells. Energy. Mater. 2024, 4, 400037.
144. Lin, L.; Jones, T. W.; Yang, T. C. J.; et al. Hydrogen bonding in perovskite solar cells. Matter 2024, 7, 38-58.
145. Walsh, A.; Yan, Y.; Huda, M. N.; Al-Jassim, M. M.; Wei, S. H. Band edge electronic structure of BiVO4: elucidating the role of the Bi s and V d orbitals. Chem. Mater. 2009, 21, 547-51.
146. Wang, Y.; Ba, Z.; Dong, S.; Xie, W.; Wu, Z.; Ran, C. Advancing SnO2 electron transport layer for efficient perovskite photovoltaics: a critical review. ACS. Appl. Mater. Interfaces. 2025, 17, 27651-70.
147. Bae, D.; Kwon, S.; Oh, J.; Kim, W. K.; Park, H. Investigation of Al2O3 diffusion barrier layer fabricated by atomic layer deposition for flexible Cu(In,Ga)Se2 solar cells. Renew. Energy. 2013, 55, 62-8.
148. Cochran, E. A.; Woods, K. N.; Johnson, D. W.; Page, C. J.; Boettcher, S. W. Unique chemistries of metal-nitrate precursors to form metal-oxide thin films from solution: materials for electronic and energy applications. J. Mater. Chem. A. 2019, 7, 24124-49.
149. Sharma, B.; Satapathi, S. Semi-transparent perovskite solar cells for building integrated photovoltaics application. Adv. Mater. Technol. 2025, 10, e00434.
150. Kim, J.; Kim, Y. S.; Choi, J. Y.; Lee, Y. H.; Kong, Y. M.; Kim, D. The electrical, optical, heating property and electromagnetic wave shield effect of TiO2/Ag/TiO2 thin films. Korean. J. Met. Mater. 2024, 62, 735-9.
151. Miglani, A.; Ogale, S. B.; Game, O. S. Architectural innovations in perovskite solar cells. Small 2025, 21, 2411355.
152. Girtan, M.; Negulescu, B. A review on oxide/metal/oxide thin films on flexible substrates as electrodes for organic and perovskite solar cells. Opt. Mater. X. 2022, 13, 100122.
153. Deschermeier, R.; Rehfeldt, S.; Klein, H. Method for characterization of solvents for physical absorption processes. Chem. Eng. Technol. 2017, 40, 28-38.
154. Yu, X.; Sun, X.; Zhu, Z.; Li, Z. A. Stabilization strategies of buried interface for efficient SAM-based inverted perovskite solar cells. Angew. Chem. Int. Ed. 2025, 64, e202419608.
155. Tang, H.; Shen, Z.; Shen, Y.; et al. Reinforcing self-assembly of hole transport molecules for stable inverted perovskite solar cells. Science 2024, 383, 1236-40.
156. Kan, Z.; Wang, Z.; Firdaus, Y.; Babics, M.; Alshareef, H. N.; Beaujuge, P. M. Atomic-layer-deposited AZO outperforms ITO in high-efficiency polymer solar cells. J. Mater. Chem. A. 2018, 6, 10176-83.
157. Kruszyńska, J.; Ostapko, J.; Ozkaya, V.; et al. Atomic layer engineering of aluminum-doped zinc oxide films for efficient and stable perovskite solar cells. Adv. Mater. Interfaces. 2022, 9, 2200575.
158. Chouhan, A. S.; Jasti, N. P.; Avasthi, S. The dual role of ozone-treated aluminum doped zinc oxide for CH3NH3PbI3 solar cells. Org. Electron. 2019, 66, 249-57.
159. Melo Monteiro Modesto AP, Merlo RB, Guzman DG, Barros TA, dos Santos TEA, Marques FC. Properties of AZO films grown by ALD applied as a TCO layer in perovskite solar cells. MRS. Adv. 2024, 9, 916-20.
160. Vijayaraghavan, S.; Wall, J.; Li, L.; Xing, G.; Zhang, Q.; Yan, F. Low-temperature processed highly efficient hole transport layer free carbon-based planar perovskite solar cells with SnO2 quantum dot electron transport layer. Mater. Today. Phys. 2020, 13, 100204.
161. Shekargoftar, M.; Pospisil, J.; Kratochvíl, M.; Vida, J.; Souček, P.; Homola, T. Low-temperature and rapid deposition of an SnO2 layer from a colloidal nanoparticle dispersion for use in planar perovskite solar cells. Energy. Technol. 2021, 9, 2001076.
162. Hsu, C. H.; Chen, K. T.; Lin, L. Y.; et al. Tantalum-doped TiO2 prepared by atomic layer deposition and its application in perovskite solar cells. Nanomaterials 2021, 11, 1504.
163. Chai, W.; Zhu, W.; Chen, D.; et al. Low-temperature preparation of titanium dioxide thin layer for highly efficient CsPbI3 perovskite solar cells. Mater. Today. Energy. 2023, 37, 101410.
164. Vincent, T.; Coutancier, D.; Dally, P.; et al. Fine tuning of Nb-incorporated TiO2 thin films by atomic layer deposition and application as efficient electron transport layer in perovskite solar cells. J. Vac. Sci. Technol. A. 2024, 42, 032802.
165. Kam, M.; Zhang, Q.; Zhang, D.; Fan, Z. Room-temperature sputtered SnO2 as robust electron transport layer for air-stable and efficient perovskite solar cells on rigid and flexible substrates. Sci. Rep. 2019, 9, 6963.
166. Muthukrishnan, A. P.; Lee, J.; Kim, J.; Kim, C. S.; Jo, S. Low-temperature solution-processed SnO2 electron transport layer modified by oxygen plasma for planar perovskite solar cells. RSC. Adv. 2022, 12, 4883-90.
167. Min, H.; Lee, D. Y.; Kim, J.; et al. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes. Nature 2021, 598, 444-50.
168. Seo, G.; Yoo, J. J.; Nam, S.; et al. Efficient and luminescent perovskite solar cells using defect-suppressed SnO2 via excess ligand strategy. Nat. Energy. 2025, 10, 774-84.
169. Uddin, A.; Yi, H. Progress and challenges of SnO2 electron transport layer for perovskite solar cells: a critical review. Sol. RRL. 2022, 6, 2100983.
170. Lee, J. H.; Lee, S.; Kim, T.; et al. Interfacial α-FAPbI3 phase stabilization by reducing oxygen vacancies in SnO2-x. Joule 2023, 7, 380-97.
171. Mattinen, M.; Gity, F.; Coleman, E.; et al. Atomic layer deposition of large-area polycrystalline transition metal dichalcogenides from 100 °C through control of plasma chemistry. Chem. Mater. 2022, 34, 7280-92.
172. Liu, J.; Li, S.; Liu, S.; et al. Oxygen vacancy management for high-temperature mesoporous SnO2 electron transport layers in printable perovskite solar cells. Angew. Chem. Int. Ed. 2022, 61, e202202012.
173. Martinez-Puente, M. A.; Tirado, J.; Jaramillo, F.; et al. Unintentional hydrogen incorporation into the SnO2 electron transport layer by ALD and its effect on the electronic band structure. ACS. Appl. Energy. Mater. 2021, 4, 10896-908.
174. Gong, J.; Song, M.; Kim, Y. K.; Kim, G. M. Unveiling and optimizing the role of ALD-SnO2 in perovskite solar cells. Adv. Ind. Eng. Chem. 2025, 1, 10.
175. Zhang, X.; Zhou, Y.; Chen, M.; et al. Novel bilayer SnO2 electron transport layers with atomic layer deposition for high-performance α-FAPbI3 perovskite solar cells. Small 2023, 19, 2303254.
176. Ge, Y.; Zheng, L.; Wang, H.; et al. Suppressing wide-angle light loss and non-radiative recombination for efficient perovskite solar cells. Nat. Photonics. 2025, 19, 170-7.
177. Chen, X.; Yuan, Z.; Fan, S.; et al. Enhanced light transmittance of electron transport layer through bilayer SnO2 for high-performance semitransparent perovskite solar cells. ChemSusChem 2025, 18, e202402582.
178. Gesesse, G. D.; Provost, M.; Yaiche, A.; et al. Innovative Nb-doped SnO2 electron transport layers prepared by atomic layer deposition for enhanced perovskite solar cells. ACS. Appl. Energy. Mater. 2025, 8, 5421-30.
179. Ko, D.; Joo, S. H.; Kim, S.; Kim, I. S.; Park, M. Low-temperature photocrystallization of atomic layer deposition-processed tin oxide for highly efficient and flexible perovskite solar cells. Small. Sci. 2025, 5, 2500196.
180. Lee, J. W.; Adu, J. S.; Agbenyeke, R. E.; et al. Ultrathin oxygen deficient SnOx films as electron extraction layers for perovskite solar modules. J. Mater. Chem. A. 2025, 13, 4100-6.
181. Cheng, Y.; Yang, Q. D.; Xiao, J.; et al. Decomposition of organometal halide perovskite films on zinc oxide nanoparticles. ACS. Appl. Mater. Interfaces. 2015, 7, 19986-93.
182. Tsarev, S.; Olthof, S.; Boldyreva, A. G.; Aldoshin, S. M.; Stevenson, K. J.; Troshin, P. A. Reactive modification of zinc oxide with methylammonium iodide boosts the operational stability of perovskite solar cells. Nano. Energy. 2021, 83, 105774.
183. Fournier, O.; Bapaume, C. D.; Messou, D.; et al. Chemical passivation with phosphonic acid derivatives of ZnO deposited by atomic layer deposition and its influence on the halide perovskite interface. ACS. Appl. Energy. Mater. 2021, 4, 5787-97.
184. Su, Z.; Xu, D.; Ma, Q.; et al. Atomic layer deposited ZnO-SnO2 electron transport bilayer for wide-bandgap perovskite solar cells. Sol. RRL. 2023, 7, 2201026.
185. Khan, F.; Ahmad, V.; Alshahrani, T.; Balobaid, A. S.; Alanazi, A. M. Influence of Al doping in zinc oxide electron transport layer for the degradation triple-cation-based organometal halide perovskite solar cells. Heliyon 2023, 9, e16069.
186. El-Shishtawy, R. M.; ElShishtawy, N. Perovskite solar cells: organic-based molecules for electron and hole transport materials with machine learning insights. Curr. Opin. Colloid. Interface. Sci. 2024, 74, 101848.
187. Rakheja, B.; Hultqvist, A.; Varma, R. M.; et al. Interfacial chemistry between formamidinium lead trihalide perovskites and atomic-layer-deposited tin oxide. ACS. Appl. Energy. Mater. 2025, 8, 8467-78.
188. Lu, H.; Gu, B.; Fang, S. In situ growth of an opal-like TiO2 electron transport layer by atomic layer deposition for perovskite solar cells. Sustain. Energy. Fuels. 2021, 5, 880-5.
189. Zimmermann, E.; Wong, K. K.; Seewald, T.; et al. Controlled crystallinity of TiO2 layers grown by atmospheric pressure spatial atomic layer deposition and their impact on perovskite solar cell efficiency. Int. J. Photoenergy. 2022, 2022, 1172871.
190. Erdenebileg, E.; Wang, H.; Li, J.; et al. Low-temperature atomic layer deposited electron transport layers for co-evaporated perovskite solar cells. Sol. RRL. 2022, 6, 2100842.
191. Shin, S.; Park, S.; Bae, Y. H.; Noh, J. S. Rational tuning of SnO2 electron transport layer grown by atomic layer deposition for performance improvement of perovskite solar cells. Sol. Energy. 2024, 277, 112754.
192. Fei, F.; Liao, Y.; Xu, Y.; et al. Stable inverted perovskite solar cells with efficiency over 23.0% via dual-layer SnO2 on perovskite. ACS. Appl. Mater. Interfaces. 2024, 16, 24760-70.
193. Farva, U.; Lee, H. W.; Kim, R. N.; Lee, D. G.; Kang, D. W.; Kim, J. Growth temperature influence on atomic-layer-deposited In2O3 thin films and their application in inorganic perovskite solar cells. Nanomaterials 2021, 11, 2047.
194. Afraj, S. N.; Velusamy, A.; Sharma, S.; et al. Recent progress in molecularly tailored organic hole transporting materials for highly efficient perovskite solar cells. J. Mater. Chem. C. 2025, 13, 15234-89.
195. Ouyang, D.; Huang, Z.; Choy, W. C. Solution-processed metal oxide nanocrystals as carrier transport layers in organic and perovskite solar cells. Adv. Funct. Mater. 2019, 29, 1804660.
196. Gawlińska-Nęcek, K.; Starowicz, Z.; Janusz-Skuza, M.; Jarzębska, A.; Panek, P. The copper oxide with alkali potassium dopant for heterojunction solar cells application. Electron. Mater. Lett. 2024, 20, 548-56.
197. Kumar, A.; Singh, S.; Yadav, A. Recent progress in inverted perovskite solar cells employing nickel oxide (NiOx) as a hole transport materials. Mater. Today. Proc. 2021, 46, 5827-32.
198. Gao, M.; Ou, Z.; Wang, C.; et al. Multifunctional buried molecule-bridge for high-performance inverted perovskite solar cells. Adv. Mater. 2026, 38, e14273.
199. Park, H.; Nandi, P.; In, Y.; Shin, H. Practical and thermal atomic layer deposition of NiO as hole-transporting layers for inverted perovskite solar cells. Sol. RRL. 2024, 8, 2300858.
200. Phung, N.; Verheijen, M.; Todinova, A.; et al. Enhanced self-assembled monolayer surface coverage by ALD NiO in pin perovskite solar cells. ACS. Appl. Mater. Interfaces. 2021, 14, 2166-76.
201. Jia, X.; Chang, Z.; Wang, K.; et al. Hydroxyl-functionalized ultrathin NiOx interlayer for minimized energy loss and enhanced interface stability in perovskite photovoltaics. J. Mater. Chem. A. 2025, 13, 29983-93.
202. He, J.; Li, G.; Huang, G.; et al. Improved anchoring of self-assembled monolayer on hydroxylated NiOx film surface for efficient and stable inverted perovskite solar cells. Adv. Funct. Mater. 2025, 35, 2413104.
203. Xu, Y.; Wang, C.; Amornkitbamrung, U.; et al. Molecular bridge on buried interface for energy level alignment in inverted perovskite solar cell with efficiency over 25%. ACS. Energy. Lett. 2025, 10, 3407-14.
204. Pellegrino, A. L.; Lo, Presti. F.; Smecca, E.; et al. A low temperature growth of Cu2O thin films as hole transporting material for perovskite solar cells. Materials 2022, 15, 7790.
205. Weiß, A.; Goldmann, J.; Kettunen, S.; et al. Conversion of ALD CuO thin films into transparent conductive p-type CuI thin films. Adv. Mater. Interfaces. 2023, 10, 2201860.
206. Sun, Q.; Sadhu, A.; Lie, S.; Wong, L. H. Critical review of Cu-based hole transport materials for perovskite solar cells: from theoretical insights to experimental validation. Adv. Mater. 2024, 36, 2402412.
207. Farva, U.; Kim, J. Temperature optimization of NiO hole transport layer prepared by atomic layer deposition. Vacuum 2023, 207, 111674.
208. Phung, N.; Zhang, D.; van, Helvoirt. C.; et al. Atomic layer deposition of NiO applied in a monolithic perovskite/PERC tandem cell. Sol. Energy. Mater. Sol. Cells. 2023, 261, 112498.
209. Xu, Y.; Park, H.; Amornkitbamrung, U.; et al. Synergistic passivation of pyridinium tetrafluoroborate (PyBF4) in inverted (CsPbI3)0.05((FAPbI3)1-x(MAPbBr3)x)0.95 solar cells with atomic layer deposited NiO layers. Sol. RRL. 2025, 9, 2400765.
210. Zhu, Z.; Yuan, S.; Mao, K.; et al. Low-temperature atomic layer deposition of hole transport layers for enhanced performance and scalability in textured perovskite/silicon tandem solar cells. Adv. Energy. Mater. 2024, 14, 2402365.
211. Cho, A. N.; Park, N. G. Impact of interfacial layers in perovskite solar cells. ChemSusChem 2017, 10, 3687-704.
212. Shen, Y.; Deng, K.; Li, L. Spiro-OMeTAD-based hole transport layer engineering toward stable perovskite solar cells. Small. Methods. 2022, 6, 2200757.
213. Xiang, W.; Liu, S.; Tress, W. Interfaces and interfacial layers in inorganic perovskite solar cells. Angew. Chem. Int. Ed. 2021, 60, 26644-57.
214. Xu, R.; Wang, C.; Zhang, Z.; et al. Buried interface engineering: a key to unlocking the potential of self-assembled monolayer (SAM)-based inverted perovskite solar cells. Small 2025, 21, e2503114.
215. Lee, J. W.; Kim, H. S.; Park, N. G. Lewis acid-base adduct approach for high efficiency perovskite solar cells. Acc. Chem. Res. 2016, 49, 311-9.
216. Tong, H.; Li, F. F.; Du, M.; et al. Interface engineering, charge carrier dynamics, and solar-driven applications of halide perovskite/2D material heterostructured photocatalysts. ACS. Appl. Mater. Interfaces. 2025, 17, 23431-65.
217. Jiang, K.; Ma, Z.; Lan, J.; Chen, D.; Li, W.; Fan, J. Screening of functional small molecules via modified machine learning strategy toward efficient all-inorganic perovskite solar cells. ACS. Appl. Mater. Interfaces. 2024, 16, 31833-42.
218. Chavan, R. D.; Parikh, N.; Tavakoli, M. M.; et al. Mesoscopic TiO2/Nb2O5 electron transfer layer for efficient and stable perovskite solar cells. Adv. Mater. Interfaces. 2021, 8, 2100177.
219. Zhao, R.; Zhang, K.; Zhu, J.; et al. Surface passivation of organometal halide perovskites by atomic layer deposition: an investigation of the mechanism of efficient inverted planar solar cells. Nanoscale. Adv. 2021, 3, 2305-15.
220. Yang, Y.; Cheng, S.; Zhu, X.; et al. Inverted perovskite solar cells with over 2,000 h operational stability at 85 °C using fixed charge passivation. Nat. Energy. 2024, 9, 37-46.
221. Xing, Z.; Fan, B.; Meng, X.; et al. Repairing humidity-induced interfacial degradation in quasi-2D perovskite solar cells printed in ambient air. Energy. Environ. Sci. 2024, 17, 3660-9.
222. Choi, D.; Shin, D.; Li, C.; et al. Carboxyl-functionalized perovskite enables ALD growth of a compact and uniform ion migration barrier. Joule 2025, 9, 101801.
223. Ghosh, S.; Pariari, D.; Behera, T.; et al. Buried interface passivation of perovskite solar cells by atomic layer deposition of Al2O3. ACS. Energy. Lett. 2023, 8, 2058-65.
224. Li, J.; Xing, Z.; Li, D.; et al. Suppressed ion migration in FA-rich perovskite photovoltaics through enhanced nucleation of encapsulation interface. Small 2024, 20, 2305732.
225. Zhang, L.; Lu, W.; Ding, F.; Jin, R.; Wang, Q. Ultrathin ALD-SnO2 interlayer for performance enhancement of inverted perovskite solar cells. Mater. Today. Commun. 2025, 46, 112921.
226. Yadav, R. K.; Manjunath, V.; Kim, Y. T.; et al. Optimized rear-interface passivation of SnS thin-film solar cells using a controlled germanium oxide interlayer for enhanced photovoltaic performance. Small 2025, 21, e07626.
227. Du, L.; Li, C.; Jiang, Y.; et al. Indium oxide buffer layer for perovskite/Si 4-terminal tandem solar cells with efficiency exceeding 30%. J. Energy. Chem. 2025, 102, 189-96.
228. Seo, S.; Shin, S.; Kim, E.; Jeong, S.; Park, N. G.; Shin, H. Amorphous TiO2 coatings stabilize perovskite solar cells. ACS. Energy. Lett. 2021, 6, 3332-41.
229. Choi, E.; Lee, J. W.; Anaya, M.; et al. Synergetic effect of aluminum oxide and organic halide salts on two-dimensional perovskite layer formation and stability enhancement of perovskite solar cells. Adv. Energy. Mater. 2023, 13, 2301717.
230. Zheng, Z.; Xue, Z.; Zhao, K.; et al. Unveiling and overcoming instabilities in perovskite solar cells induced by atomic-layer-deposition tin oxide. Sol. RRL. 2024, 8, 2301076.
231. Yu, B.; Tang, F.; Yang, Y.; et al. Impermeable atomic layer deposition for sputtering buffer layer in efficient semi-transparent and tandem solar cells via activating unreactive substrate. Adv. Mater. 2023, 35, 2202447.
232. Johnson, S. A.; White, K. P.; Tong, J.; et al. Improving the barrier properties of tin oxide in metal halide perovskite solar cells using ozone to enhance nucleation. Joule 2023, 7, 2873-93.
233. Amornkitbamrung, U.; Xu, Y.; Gibson, A.; et al. Mechanically robust and yet electrically conductive C60-SnO2 electron transporting bilayer in stable perovskite solar cells. Langmuir 2025, 41, 21500-8.
234. Gupta, S.; Laxmi, L.; Chityala, V. G.; et al. Optimization of atomic layer deposition process of tin oxide thin films for near-infrared-transparent halide perovskite solar cells. ACS. Appl. Energy. Mater. 2025, 8, 10183-91.
235. Lukas, T.; Seo, S.; Holzhey, P.; et al. Charge extraction multilayers enable positive-intrinsic-negative perovskite solar cells with carbon electrodes. ACS. Energy. Lett. 2025, 10, 2736-42.
236. Zhang, L.; Fang, M.; Fu, L. S.; et al. Ultrathin HfAlO ferroelectrics enhancing electron transport and perovskite solar cell performance. J. Mater. Res. 2021, 36, 1855-65.
237. Yang, Y.; Zhang, Y.; Li, R.; et al. Low-temperature atomic layer deposition of double-layer water vapor barrier for high humidity stable perovskite solar cells. Adv. Opt. Mater. 2023, 11, 2300148.
238. Guli, M.; Zhang, Y.; Li, R.; He, W.; Lan, C.; Zhou, Y. An impressive open-circuit voltage of 1.223 V and high humidity stability of perovskite solar cells with MgO buffer layer deposited by low-temperature atomic layer deposition. Small 2024, 20, 2404199.
239. Witteck, R.; Nguyen, Minh. D.; Paul, G.; et al. Reducing thermal degradation of perovskite solar cells during vacuum lamination by internal diffusion barriers. ACS. Appl. Energy. Mater. 2024, 7, 10750-7.
240. Zardetto, V.; Williams, B. L.; Perrotta, A.; et al. Atomic layer deposition for perovskite solar cells: research status, opportunities and challenges. Sustain. Energy. Fuels. 2017, 1, 30-55.
241. Haghighi, M.; Ghazyani, N.; Mahmoodpour, S.; et al. Low-temperature processing methods for tin oxide as electron transporting layer in scalable perovskite solar cells. Sol. RRL. 2023, 7, 2201080.
242. Kuang, Y.; Zardetto, V.; van, Gils. R.; et al. Low-temperature plasma-assisted atomic-layer-deposited SnO2 as an electron transport layer in planar perovskite solar cells. ACS. Appl. Mater. Interfaces. 2018, 10, 30367-78.
243. Yu, B.; Zhang, J.; Yang, Y.; Yu, D.; Mai, Y.; Chen, X. Influences of deposition conditions on atomic layer deposition films for enhanced performance in perovskite solar cells. Energy. Mater. 2024, 4, 400045.
244. Zhang, Y.; Ding, Y.; Christofides, P. D. Multiscale computational fluid dynamics modeling and reactor design of plasma-enhanced atomic layer deposition. Comput. Chem. Eng. 2020, 142, 107066.
245. Koushik, D.; Hazendonk, L.; Zardetto, V.; et al. Chemical analysis of the interface between hybrid organic-inorganic perovskite and atomic layer deposited Al2O3. ACS. Appl. Mater. Interfaces. 2019, 11, 5526-35.
246. Kunene T, Kwanda Tartibu L, Ukoba K, Jen TC. Review of atomic layer deposition process, application and modeling tools. Mater. Today. Proc. 2022, 62, S95-109.
247. Mallik, N.; Hajhemati, J.; Dufoulon, V.; et al. Interfacial reactions between atomic layer deposited NiOx hole transport layers and metal halide perovskites in nip perovskite solar cells. EES. Solar. 2025, 1, 1004-16.
248. Apergi, S.; Brocks, G.; Tao, S.; Olthof, S. Probing the reactivity of ZnO with perovskite precursors. ACS. Appl. Mater. Interfaces. 2024, 16, 14984-94.
249. Yang, Y.; Wang, S.; Ji, W.; et al. TiCl4 precursor affecting the performance of HTM-free carbon-based perovskite solar cell. Nanotechnology 2023, 35, 07LT01.
250. Hiller, D.; Munnik, F.; López-Vidrier, J.; et al. Comparison of three titanium precursors for atomic-layer-deposited TiO2 for passivating contacts on silicon. J. Vac. Sci. Technol. A. 2024, 42, 032406.
251. Vazquez-Arce, J. L.; Suta, T.; Fodor, B.; et al. Optical properties of TiO2 grown by atomic layer deposition using various oxidizing agents: the ellipsometry analysis of absorption properties. Adv. Mater. Interfaces. 2024, 11, 2400269.
252. Lee, J. E.; Motti, S. G.; Oliver, R. D. J.; et al. Unraveling loss mechanisms arising from energy-level misalignment between metal halide perovskites and hole transport layers. Adv. Funct. Mater. 2024, 34, 2401052.
253. Agresti, A.; Di, Giacomo. F.; Pescetelli, S.; Di, Carlo. A. Scalable deposition techniques for large-area perovskite photovoltaic technology: a multi-perspective review. Nano. Energy. 2024, 122, 109317.
254. Chen, M.; Nijboer, M.; Kovalgin, A.; Nijmeijer, A.; Roozeboom, F.; Luiten-Olieman, M. Atmospheric-pressure atomic layer deposition: recent applications and new emerging applications in high-porosity/3D materials. Dalton. Trans. 2023, 52, 10254-77.
255. Lisker, M.; Kalishettyhalli, Mahadevaiah. M.; Dorai, Swamy. Reddy. K. Plasma-enhanced atomic layer deposition of silicon nitride for front-end-of-line applications. J. Vac. Sci. Technol. A. 2023, 41, 042406.
256. Riazimehr, S.; Esteki, A.; Otto, M.; et al. Plasma-enhanced atomic layer deposition of Al2O3 on graphene via an in situ-deposited interlayer. Mater. Sci. Semicond. Process. 2025, 199, 109829.
257. Hoye, R. L.; Muñoz-Rojas, D.; Sun, Z.; et al. Spatial atomic layer deposition for energy and electronic devices. PRX. Energy. 2025, 4, 017002.
258. Musselman, K. P.; Uzoma, C. F.; Miller, M. S. Nanomanufacturing: high-throughput, cost-effective deposition of atomic scale thin films via atmospheric pressure spatial atomic layer deposition. Chem. Mater. 2016, 28, 8443-52.
