REFERENCES
1. George, E.; Curtin, W.; Tasan, C. High entropy alloys: a focused review of mechanical properties and deformation mechanisms. Acta. Mater. 2020, 188, 435-74.
2. Li, W.; Xie, D.; Li, D.; Zhang, Y.; Gao, Y.; Liaw, P. K. Mechanical behavior of high-entropy alloys. Prog. Mater. Sci. 2021, 118, 100777.
3. Cantor, B.; Chang, I.; Knight, P.; Vincent, A. Microstructural development in equiatomic multicomponent alloys. Mat. Sci. Eng. A-Struct. 2004, 375-377, 213-8.
4. Otto, F.; Dlouhý, A.; Somsen, C.; Bei, H.; Eggeler, G.; George, E. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy. Acta. Mater. 2013, 61, 5743-55.
5. Gludovatz, B.; Hohenwarter, A.; Catoor, D.; Chang, E. H.; George, E. P.; Ritchie, R. O. A fracture-resistant high-entropy alloy for cryogenic applications. Science 2014, 345, 1153-8.
6. Liu, W.; Wu, Y.; He, J.; Nieh, T.; Lu, Z. Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy. Scr. Mater. 2013, 68, 526-9.
7. Sun, S.; Tian, Y.; Lin, H.; et al. Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure. Mater. Design. 2017, 133, 122-7.
8. Watanabe, H.; Murata, T.; Ikeo, N.; Mukai, T.; Han, K.; Tsuchiya, K. Effect of initial microstructure on grain refinement under hot compression in CrMnFeCoNi high-entropy alloy with Al addition. Materialia 2021, 18, 101172.
9. Li, X.; Liu, R.; Hou, J.; Zhang, Z.; Zhang, Z. Trade-off model for strength-ductility relationship of metallic materials. Acta. Mater. 2025, 289, 120942.
10. Ma, E. Instabilities and ductility of nanocrystalline and ultrafine-grained metals. Scr. Mater. 2003, 49, 663-8.
11. Dong, X.; Gao, B.; Xiao, L.; et al. Heterostructured metallic structural materials: research methods, properties, and future perspectives. Adv. Funct. Mater. 2024, 34, 2410521.
12. Fang, T. H.; Li, W. L.; Tao, N. R.; Lu, K. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper. Science 2011, 331, 1587-90.
13. Wang, Y.; Chen, M.; Zhou, F.; Ma, E. High tensile ductility in a nanostructured metal. Nature 2002, 419, 912-5.
15. Park, K.; Nishiyama, M.; Nakada, N.; Tsuchiyama, T.; Takaki, S. Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel. Mat. Sci. Eng. A-Struct. 2014, 604, 135-41.
16. Lee, K.; Song, Y.; Kim, S.; et al. Genetic design of new aluminum alloys to overcome strength-ductility trade-off dilemma. J. Alloys. Compd. 2023, 947, 169546.
17. Yang, Y.; Hu, J.; Liu, X.; et al. Post treatment of an additively manufactured composite consisting of 304L stainless steel and CoCrFeMnNi high-entropy alloy. Mat. Sci. Eng. A-Struct. 2022, 831, 142104.
18. Shokry, A.; Ståhle, P.; Orlov, D. On the optimisation of phase fractions in harmonic structure materials. J. Mater. Sci. 2024, 59, 6115-33.
19. Ameyama, K.; Cazes, F.; Couque, H.; et al. Harmonic structure, a promising microstructure design. Mater,. Res. Lett. 2022, 10, 440-71.
20. Orlov, D.; Kulagin, R.; Beygelzimer, Y. Strain partitioning and back-stress evaluation in harmonic-structure materials. Mater. Lett. 2020, 275, 128126.
21. Sathiyamoorthi, P.; Kim, H. S. High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties. Prog. Mater. Sci. 2022, 123, 100709.
22. Shi, L.; Zhang, Z.; Chen, X. Fatigue crack growth behavior in CoCrFeMnNi high entropy alloy with harmonic structure topology. Int. J. Fatigue. 2023, 172, 107656.
23. Tokizane, M.; Isonishi, K. Production of uniformly-sized spherical powder by plasma rotating electrode process and its applications to some intermetallics powders. J. Jpn. Soc. Powder. Powder. Metallurgy. 1992, 39, 1137-44.
24. Zhu, Y.; Wu, X. Perspective on hetero-deformation induced (HDI) hardening and back stress. Mater. Res. Lett. 2019, 7, 393-8.
