REFERENCES
1. Bostanabad, R.; Zhang, Y.; Li, X.; et al. Computational microstructure characterization and reconstruction: review of the state-of-the-art techniques. Prog. Mater. Sci. 2018, 95, 1-41.
2. Cai, J.; Han, M.; Yan, X.; et al. A process-synergistic active learning framework for high-strength Al-Si alloys design. NPJ. Comput. Mater. 2025, 11, 1721.
3. Jiang, L.; Zhang, Z.; Hu, H.; He, X.; Fu, H.; Xie, J. A rapid and effective method for alloy materials design via sample data transfer machine learning. NPJ. Comput. Mater. 2023, 9, 979.
4. Zhang, H.; Fu, H.; Zhu, S.; Yong, W.; Xie, J. Machine learning assisted composition effective design for precipitation strengthened copper alloys. Acta. Mater. 2021, 215, 117118.
5. Gao, T.; Gao, J.; Yang, S.; Zhang, L. Data-driven design of novel lightweight refractory high-entropy alloys with superb hardness and corrosion resistance. NPJ. Comput. Mater. 2024, 10, 1457.
6. Giles, S. A.; Sengupta, D.; Broderick, S. R.; Rajan, K. Machine-learning-based intelligent framework for discovering refractory high-entropy alloys with improved high-temperature yield strength. NPJ. Comput. Mater. 2022, 8, 926.
7. Jia, B.; Wan, Q.; Yan, L.; et al. Tribological properties and machine learning prediction of FeCoCrNiAlN high entropy coatings. Surf. Coat. Technol. 2024, 477, 130341.
8. Zou, H.; Tian, Y.; Zhang, L.; et al. Integrating machine learning and CALPHAD method for exploring low-modulus near-β-Ti alloys. Rare. Met. 2024, 43, 309-23.
9. Liu, Z.; Wang, T.; Jin, L.; et al. Towards high stiffness and ductility - The Mg-Al-Y alloy design through machine learning. J. Mater. Sci. Technol. 2025, 221, 194-203.
10. Yang, W.; Wang, Y.; Huang, X.; Liu, S.; Wang, P.; Du, Y. Effects of Cu content and Sintering temperature on microstructure and mechanical properties of SiCp/Al-Cu-Mg composites through experimental study, CALPHAD-type simulation and machine learning. J. Mater. Res. Technol. 2024, 33, 2216-25.
11. Qiu, R.; Aboulfadl, H.; Bäcke, O.; Stiens, D.; Andrén, H.; Halvarsson, M. Atom probe tomography investigation of 3D nanoscale compositional variations in CVD TiAlN nanolamella coatings. Surf. Coat. Technol. 2021, 426, 127741.
12. Knutsson, A.; Ullbrand, J.; Rogström, L.; et al. Microstructure evolution during the isostructural decomposition of TiAlN - A combined in-situ small angle X-ray scattering and phase field study. J. Appl. Phys. 2013, 113, 213518.
13. Tai, P.; Pang, L.; Shen, T.; et al. Microstructure evolution and nanohardness of nanostructured TiAlN coating under N+ ion irradiation. Surf. Coat. Technol. 2022, 441, 128494.
14. Salama, H.; Shchyglo, O.; Steinbach, I. The interplay between the martensitic transformation rate and the rate of plastic relaxation during martensitic transformation in low-carbon steel, a phase-field study. NPJ. Comput. Mater. 2025, 11, 1499.
15. Gong, P.; Sun, L.; Wynne, B. P.; Palmiere, E. J.; Rainforth, W. M. The effect of thermomechanical controlled processing on recrystallisation and subsequent deformation-induced ferrite transformation textures in microalloyed steels. J. Mater. Sci. 2018, 53, 6922-38.
16. Zou, Y.; Xu, Y.; Hu, Z.; et al. Austenite stability and its effect on the toughness of a high strength ultra-low carbon medium manganese steel plate. Mater. Sci. Eng. A. 2016, 675, 153-63.
17. Li, Z.; Wang, T.; Chu, D.; Liu, Z.; Cui, Y. A coupled crystal-plasticity and phase-field model for understanding fracture behaviors of single crystal tungsten. Int. J. Plast. 2022, 157, 103375.
18. Zhao, P.; Song, En. Low. T.; Wang, Y.; Niezgoda, S. R. An integrated full-field model of concurrent plastic deformation and microstructure evolution: application to 3D simulation of dynamic recrystallization in polycrystalline copper. Int. J. Plast. 2016, 80, 38-55.
19. Roy, A. M.; Ganesan, S.; Acar, P.; Arróyave, R.; Sundararaghavan, V. Combining crystal plasticity and phase field model for predicting texture evolution and the influence of nuclei clustering on recrystallization path kinetics in Ti-alloys. Acta. Mater. 2024, 266, 119645.
20. Cai, T.; Xu, Y.; Zhang, Z.; Zhang, S.; Huang, H. H.; Hu, C. C. The application of phase-field method in magnetoelastic functional materials. Microstructures 2025, 5, 2025059.
21. Xu, Y.; Cai, T.; Hu, C.; et al. Magnetic-field driven domain wall evolution in rhombohedral magnetostrictive single crystals: a phase-field simulation. Microstructures 2025, 5, 2024052.
22. Zhao, Y. Understanding and design of metallic alloys guided by phase-field simulations. NPJ. Comput. Mater. 2023, 9, 1038.
23. Wang, Y.; Zhang, Y.; Liu, X.; et al. Simulation of microstructure evolution in Mg alloys by phase-field methods: a review. Crystals 2022, 12, 1305.
24. Yang, C.; Xu, Q.; Liu, B. Phase-field-lattice Boltzmann simulation of dendrite growth under natural convection in multicomponent superalloy solidification. Rare. Met. 2020, 39, 147-55.
25. Yang, C.; Xu, Q.; Su, X.; Liu, B. Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy. Acta. Mater. 2019, 175, 286-96.
26. Oommen, V.; Shukla, K.; Goswami, S.; Dingreville, R.; Karniadakis, G. E. Learning two-phase microstructure evolution using neural operators and autoencoder architectures. NPJ. Comput. Mater. 2022, 8, 876.
27. Ma, B.; Ban, X.; Huang, H.; Chen, Y.; Liu, W.; Zhi, Y. Deep learning-based image segmentation for Al-La alloy microscopic images. Symmetry 2018, 10, 107.
28. Kim, Y.; Park, H. K.; Jung, J.; et al. Exploration of optimal microstructure and mechanical properties in continuous microstructure space using a variational autoencoder. Mater. Des. 2021, 202, 109544.
29. Chowdhury, A.; Kautz, E.; Yener, B.; Lewis, D. Image driven machine learning methods for microstructure recognition. Comput. Mater. Sci. 2016, 123, 176-87.
30. Cang, R.; Li, H.; Yao, H.; Jiao, Y.; Ren, Y. Improving direct physical properties prediction of heterogeneous materials from imaging data via convolutional neural network and a morphology-aware generative model. Comput. Mater. Sci. 2018, 150, 212-21.
31. Long, X.; Lu, C.; Shen, Z.; Su, Y. Identification of Mechanical Properties of Thin-Film Elastoplastic Materials by Machine Learning. Acta. Mech. Solida. Sin. 2023, 36, 13-21.
32. Zhu, L.; Luo, Q.; Chen, Q.; et al. Prediction of ultimate tensile strength of Al-Si alloys based on multimodal fusion learning. Mater. Genome. Eng. Adv. 2024, 2, e26.
33. Kondo, R.; Yamakawa, S.; Masuoka, Y.; Tajima, S.; Asahi, R. Microstructure recognition using convolutional neural networks for prediction of ionic conductivity in ceramics. Acta. Mater. 2017, 141, 29-38.
34. Chen, L.; Paulitsch, J.; Du, Y.; Mayrhofer, P. H. Thermal stability and oxidation resistance of Ti-Al-N coatings. Surf. Coat. Technol. 2012, 206, 2954-60.
35. Biava, G.; de, Araujo. Fernandes. Siqueira. I. B.; Vaz, R. F.; et al. Evaluation of high temperature corrosion resistance of CrN, AlCrN, and TiAlN arc evaporation PVD coatings deposited on Waspaloy. Surf. Coat. Technol. 2022, 438, 128398.
36. Rachbauer, R.; Massl, S.; Stergar, E.; et al. Decomposition pathways in age hardening of Ti-Al-N films. J. Appl. Phys. 2011, 110, 023515.
37. Liu, Z.; Ågren, J.; Suehiro, M. Thermodynamics of interfacial segregation in solute drag. Mater. Sci. Eng. A. 1998, 247, 222-8.
38. Zhang, T.; Zhong, J.; Zhang, L. Pareto optimal driven automation framework for quantitative microstructure simulation towards spinodal decomposition. MRS. Commun. 2023, 13, 877-84.
39. Chavee, L.; Serag, E.; da Silva Pires, M.; Lucas, S.; Haye, E. A mechanistic approach of oxidation resistance, structural and mechanical behaviour of TiAlN coatings. Appl. Surf. Sci. 2022, 586, 152851.
40. Chen, L.; Du, Y.; Wang, A. J.; Wang, S. Q.; Zhou, S. Z. Effect of Al content on microstructure and mechanical properties of Ti-Al-Si-N nanocomposite coatings. Int. J. Reract. Met. Hard. Mater. 2009, 27, 718-21.
41. Sun, X.; Chen, L.; Zhou, J. Structure, mechanical and thermal properties of TiAlBN/TiAlN multilayers. Surf. Coat. Technol. 2022, 441, 128512.
42. Peng, Y. H.; Chen, L.; Xu, Y. X.; Hu, C.; Du, Y. Interface enhanced mechanical and thermal properties of TiSiN/TiAlN multilayers. J. Alloys. Compd. 2021, 861, 158571.
43. Chen, L.; Du, Y.; Wang, S. Q.; Wang, A. J.; Xu, H. Mechanical properties and microstructural evolution of TiN coatings alloyed with Al and Si. Mater. Sci. Eng. A. 2009, 502, 139-43.
44. Chen, Y.; Roa, J.; Yu, C.; et al. Enhanced thermal stability and fracture toughness of TiAlN coatings by Cr, Nb and V-alloying. Surf. Coat. Technol. 2018, 342, 85-93.
45. Zou, H. K.; Chen, L.; Chang, K. K.; Pei, F.; Du, Y. Enhanced hardness and age-hardening of TiAlN coatings through Ru-addition. Scr. Mater. 2019, 162, 382-6.
46. Zhang, J.; Hu, C.; Du, J. W.; Chen, L.; Kong, Y. Evolution of microstructure, mechanical and thermal properties with varied oxygen contents in TiAlON coatings. Int. J. Refract. Met. Hard. Mater. 2023, 111, 106074.
47. Mendez, A.; Monclus, M.; Santiago, J.; et al. Effect of Al content on the hardness and thermal stability study of AlTiN and AlTiBN coatings deposited by HiPIMS. Surf. Coat. Technol. 2021, 422, 127513.
48. Chaar, A.; Rogström, L.; Johansson-jöesaar, M.; et al. Microstructural influence of the thermal behavior of arc deposited TiAlN coatings with high aluminum content. J. Alloys. Compd. 2021, 854, 157205.
49. Forsén, R.; Johansson, M.; Odén, M.; Ghafoor, N. Decomposition and phase transformation in TiCrAlN thin coatings. J. Vac. Sci. Technol. Vac. Surf. Films. 2012, 30, 061506.
