REFERENCES
1. Barsoum, M. W.; Radovic, M. Elastic and mechanical properties of the MAX phases. Annu. Rev. Mater. Res. 2011, 41, 195-227.
2. Sun, Z. M. Progress in research and development on MAX phases: a family of layered ternary compounds. Int. Mater. Rev. 2011, 56, 143-66.
3. Barsoum, M. W. The Mn+1AXn phases: a new class of solids. Prog. Solid. State. Chem. 2000, 28, 201-81.
4. Alam, M. S.; Chowdhury, M. A.; Khandaker, T.; et al. Advancements in MAX phase materials: structure, properties, and novel applications. RSC. Adv. 2024, 14, 26995-7041.
5. Bao, Y.; Wang, X.; Zhang, H.; Zhou, Y. Thermal shock behavior of Ti3AlC2 from between 200 °C and 1,300 °C. J. Eur. Ceram. Soc. 2005, 25, 3367-74.
6. Barsoum, M. W.; Zhen, T.; Kalidindi, S. R.; Radovic, M.; Murugaiah, A. Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa. Nat. Mater. 2003, 2, 107-11.
7. Zhen, T.; Barsoum, M.; Kalidindi, S. Effects of temperature, strain rate and grain size on the compressive properties of Ti3SiC2. Acta. Materialia. 2005, 53, 4163-71.
8. Guitton, A.; Joulain, A.; Thilly, L.; Tromas, C. Dislocation analysis of Ti2AlN deformed at room temperature under confining pressure. Philos. Mag. 2012, 92, 4536-46.
9. Jones, N.; Humphrey, C.; Connor, L.; et al. On the relevance of kinking to reversible hysteresis in MAX phases. Acta. Materialia. 2014, 69, 149-61.
10. Tromas, C.; Villechaise, P.; Gauthier-brunet, V.; Dubois, S. Slip line analysis around nanoindentation imprints in Ti3SnC2: a new insight into plasticity of MAX-phase materials. Philos. Mag. 2011, 91, 1265-75.
11. Guitton, A.; Joulain, A.; Thilly, L.; Tromas, C. Evidence of dislocation cross-slip in MAX phase deformed at high temperature. Sci. Rep. 2014, 4, 6358.
12. Zhang, H.; Wang, X.; Wan, P.; Zhan, X.; Zhou, Y.; Mitchell, T. Insights into high-temperature uniaxial compression deformation behavior of Ti3AlC2. J. Am. Ceram. Soc. 2015, 98, 3332-7.
13. Manoun, B.; Saxena, S. K.; Barsoum, M. W. High pressure study of Ti4AlN3 to 55 GPa. Appl. Phys. Lett. 2005, 86, 101906.
14. Zhang, H.; Wu, X.; Nickel, K. G.; Chen, J.; Presser, V. High-pressure powder X-ray diffraction experiments and ab initio calculation of Ti3AlC2. J. Appl. Phys. 2009, 106, 013519.
15. Manoun, B.; Saxena, S. K.; El-raghy, T.; Barsoum, M. W. High-pressure X-ray diffraction study of Ta4AlC3. Appl. Phys. Lett. 2006, 88, 201902.
16. Manoun, B.; Saxena, S. K.; Hug, G.; Ganguly, A.; Hoffman, E. N.; Barsoum, M. W. Synthesis and compressibility of Ti3(Al,Sn0.2)C2 and Ti3Al(C0.5,N0.5)2. J. Appl. Phys. 2007, 101, 113523.
17. Onodera, A.; Hirano, H.; Yuasa, T.; Gao, N. F.; Miyamoto, Y. Static compression of Ti3SiC2 to 61 GPa. Appl. Phys. Lett. 1999, 74, 3782-4.
18. Li, Y.; Ye, M.; Tang, R.; et al. Pressure-induced isostructural phase transition in Ti3AlC2: experimental and theoretical investigation. Phys. Chem. Chem. Phys. 2020, 22, 13136-42.
19. Zhao, Y.; Deng, S.; Liu, H.; Zhang, J.; Guo, Z.; Hou, H. First-principle investigation of pressure and temperature influence on structural, mechanical and thermodynamic properties of Ti3AC2 (A = Al and Si). Comput. Mater. Sci. 2018, 154, 365-70.
20. He, X.; Bai, Y.; Zhu, C.; Sun, Y.; Li, M.; Barsoum, M. General trends in the structural, electronic and elastic properties of the M3AlC2 phases (M = transition metal): a first-principle study. Comput. Mater. Sci. 2010, 49, 691-8.
21. Veronica, Gray.; Gordon, J. Kearley.; Oliver, Kirstein.; et al. Mn+1AXn phonon density of states: Ti3AlC2 and Ti3SiC2 simulation and experimentation results. JCCE 2015, 9, 253-61.
22. Gray, V.; Kisi, E. H.; Kirstein, O.; Stampfl, A. P. J. Elastic constants of polycrystalline Ti3AlC2 and Ti3SiC2 measured using coherent inelastic neutron scattering. J. Am. Ceram. Soc. 2017, 100, 705-12.
23. Merkel, S.; McNamara, A. K.; Kubo, A.; et al. Deformation of (Mg,Fe)SiO3 post-perovskite and D” anisotropy. Science 2007, 316, 1729-32.
24. Marquardt, H.; Miyagi, L. Slab stagnation in the shallow lower mantle linked to an increase in mantle viscosity. Nature. Geosci. 2015, 8, 311-4.
25. Miyagi, L.; Kanitpanyacharoen, W.; Kaercher, P.; Lee, K. K.; Wenk, H. R. Slip systems in MgSiO3 post-perovskite: implications for D” anisotropy. Science 2010, 329, 1639-41.
26. Yue, B.; Hong, F.; Merkel, S.; et al. Deformation behavior across the Zircon-Scheelite phase transition. Phys. Rev. Lett. 2016, 117, 135701.
27. Yue, B.; Dai, W.; Zhang, X.; et al. Deformation behavior of high-entropy oxide (Mg,Co,Ni,Cu,Zn)O under extreme compression. Scripta. Materialia. 2022, 219, 114879.
28. Yue, B.; Hong, F.; Hirao, N.; et al. A simple variant selection in stress-driven martensitic transformation. Proc. Natl. Acad. Sci. U. S. A. 2019, 116, 14905-9.
29. Zhou, J.; Peng, F.; Hong, F.; Yue, B. Dislocation-mediated ultrahigh mechanical properties in nano-TiN. Phys. Rev. Mater. 2024, 8, 036001.
30. Merkel, S.; Yagi, T. X-ray transparent gasket for diamond anvil cell high pressure experiments. Rev. Sci. Instrum. 2005, 76, 046109.
31. Lutterotti, L.; Vasin, R.; Wenk, H. Rietveld texture analysis from synchrotron diffraction images. I. Calibration and basic analysis. Powder. Diffr. 2014, 29, 76-84.
32. Wenk, H.; Lutterotti, L.; Kaercher, P.; Kanitpanyacharoen, W.; Miyagi, L.; Vasin, R. Rietveld texture analysis from synchrotron diffraction images. II. Complex multiphase materials and diamond anvil cell experiments. Powder. Diffr. 2014, 29, 220-32.
33. Lutterotti, L.; Scardi, P. Simultaneous structure and size-strain refinement by the Rietveld method. J. Appl. Crystallogr. 1990, 23, 246-52.
34. Matthies, S.; Vinel, G. W. On the reproduction of the orientation distribution function of texturized samples from reduced pole figures using the conception of a conditional ghost correction. Physica. Status. Solidi. (b). 1982, 112, K111-4.
35. Singh, A. K.; Balasingh, C.; Mao, H.; Hemley, R. J.; Shu, J. Analysis of lattice strains measured under nonhydrostatic pressure. J. Appl. Phys. 1998, 83, 7567-75.
36. Wang, J.; Zhou, Y. Polymorphism of Ti3SiC2 ceramic: first-principles investigations. Phys. Rev. B. 2004, 69, 144108.
37. Farber, L.; Levin, I.; Barsoum, M. W.; El-raghy, T.; Tzenov, T. High-resolution transmission electron microscopy of some Tin+1AXn compounds (n = 1, 2; A = Al or Si; X = C or N). J. Appl. Phys. 1999, 86, 2540-3.
38. Yu, R.; Zhan, Q.; He, L. L.; Zhou, Y. C.; Ye, H. Q. Polymorphism of Ti3SiC2. J. Mater. Res. 2002, 17, 948-50.
39. Wang, Z.; Zha, C. S.; Barsoum, M. W. Compressibility and pressure-induced phase transformation of Ti3GeC2. Appl. Phys. Lett. 2004, 85, 3453-5.
40. Zhou, Y. C.; Wang, X. H.; Sun, Z. M.; Chen, S. Q. Electronic and structural properties of the layered ternary carbide Ti3AlC2. J. Mater. Chem. , 11, 2335-9.
41. Wang, J. Y.; Zhou, Y. C. First-principles study of equilibrium properties and electronic structure of Ti3Si0.75Al0.25C2 solid solution. J. Phys:. Condens. Matter. 2003, 15, 5959-68.
42. Xie, M.; Mohammadi, R.; Turner, C. L.; Kaner, R. B.; Kavner, A.; Tolbert, S. H. Lattice stress states of superhard tungsten tetraboride from radial X-ray diffraction under nonhydrostatic compression. Phys. Rev. B. 2014, 90, 104104.
43. Li, J.; Hu, R.; Zhou, M.; Gao, Z.; Wu, Y.; Luo, X. High temperature micromechanical behavior of Ti2AlN particle reinforced TiAl based composites investigated by in-situ high-energy X-ray diffraction. Mater. Design. 2021, 212, 110225.
44. Barsoum, M.; Tucker, G. Deformation of layered solids: ripplocations not basal dislocations. Scripta. Materialia. 2017, 139, 166-72.
45. Gruber, J.; Plummer, G.; Tucker, G. J. Bending the rules: Strain accommodation in layered crystalline solids through nanoscale buckling over dislocations. J. Mech. Phys. Solids. 2024, 182, 105450.
46. Kanitpanyacharoen, W.; Merkel, S.; Miyagi, L.; et al. Significance of mechanical twinning in hexagonal metals at high pressure. Acta. Materialia. 2012, 60, 430-42.
47. Chung, H. Y.; Weinberger, M. B.; Levine, J. B.; et al. Synthesis of ultra-incompressible superhard rhenium diboride at ambient pressure. Science 2007, 316, 436-9.
48. Kooi, B.; Poppen, R.; Carvalho, N.; De, Hosson. J.; Barsoum, M. Ti3SiC2: A damage tolerant ceramic studied with nano-indentations and transmission electron microscopy. Acta. Materialia. 2003, 51, 2859-72.
49. Duffy, T. S.; Shen, G.; Heinz, D. L.; et al. Lattice strains in gold and rhenium under nonhydrostatic compression to 37 GPa. Phys. Rev. B. 1999, 60, 15063-73.
50. Xiong, L.; Liu, J.; Bai, L.; Li, X.; Lin, C.; Lin, J. Strength and structural phase transitions of gadolinium at high pressure from radial X-ray diffraction. J. Appl. Phys. 2014, 116, 243503.
51. Singh, A. K.; Mao, H.; Shu, J.; Hemley, R. J. Estimation of single-crystal elastic moduli from polycrystalline X-ray diffraction at high pressure: application to FeO and iron. Phys. Rev. Lett. 1998, 80, 2157-60.
52. He, D.; Duffy, T. S. X-ray diffraction study of the static strength of tungsten to 69 GPa. Phys. Rev. B. 2006, 73, 134106.
53. Shieh, S. R.; Duffy, T. S.; Li, B. Strength and elasticity of SiO2 across the stishovite-CaCl2-type structural phase boundary. Phys. Rev. Lett. 2002, 89, 255507.
54. Chen, H.; Peng, F.; Mao, H.; et al. Strength and elastic moduli of TiN from radial X-ray diffraction under nonhydrostatic compression up to 45 GPa. J. Appl. Phys. 2010, 107, 113503.
55. Vogler, T. J.; Reinhart, W. D.; Chhabildas, L. C. Dynamic behavior of boron carbide. J. Appl. Phys. 2004, 95, 4173-83.
56. Kiefer, B.; Shieh, S. R.; Duffy, T. S.; Sekine, T. Strength, elasticity, and equation of state of the nanocrystalline cubic silicon nitride γ-Si3N4 to 68 GPa. Phys. Rev. B. 2005, 72, 014102.
57. He, D.; Shieh, S. R.; Duffy, T. S. Strength and equation of state of boron suboxide from radial X-ray diffraction in a diamond cell under nonhydrostatic compression. Phys. Rev. B. 2004, 70, 184121.
58. Higashi, M.; Momono, S.; Kishida, K.; Okamoto, N. L.; Inui, H. Anisotropic plastic deformation of single crystals of the MAX phase compound Ti3SiC2 investigated by micropillar compression. Acta. Materialia. 2018, 161, 161-70.
59. Gruber, J.; Lang, A. C.; Griggs, J.; Taheri, M. L.; Tucker, G. J.; Barsoum, M. W. Evidence for bulk ripplocations in layered solids. Sci. Rep. 2016, 6, 33451.







