REFERENCES
1. Tang, J.; Wu, Z.; Yao, X.; et al. From bio-inertness to osseointegration and antibacterial activity: A one-step micro-arc oxidation approach for multifunctional Ti implants fabricated by additive manufacturing. Mater. Des. 2022, 221, 110962.
2. Salehi, M.; Malekan, M.; Montazeri, A. Comprehensive study of sub-micron porous titanium-zirconium scaffolds fabricated by liquid metal dealloying. J. Alloys. Compd. 2025, 1010, 177137.
3. Long, M.; Rack, H. J. Titanium alloys in total joint replacement - a materials science perspective. Biomaterials 1998, 19, 1621-39.
4. Ungersboeck, A.; Geret, V.; Pohler, O.; Schuetz, M.; Wuest, W. Tissue reaction to bone plates made of pure titanium: a prospective, quantitative clinical study. J. Mater. Sci:. Mater. Med. 1995, 6, 223-9.
5. Wang, K. The use of titanium for medical applications in the USA. Mater. Sci. Eng:. A. 1996, 213, 134-7.
6. Rieu, J.; Pichat, A.; Rabbe, L.; Rambert, A.; Chabrol, C.; Robelet, M. Structural modifications induced by ion implantation in metals and polymers used for orthopaedic prostheses. Mater. Sci. Technol. 1992, 8, 589-93.
7. Wang, C.; Zheng, C.; Rang, J. Joint replacement materials and friction wear. J. Biomed. Eng. 1997, 14, 64-67. (in Chinese).
8. Levine, B. R.; Sporer, S.; Poggie, R. A.; Della, Valle. C. J.; Jacobs, J. J. Experimental and clinical performance of porous tantalum in orthopedic surgery. Biomaterials 2006, 27, 4671-81.
9. Bermúdez, M.; Carrión, F. J.; Martínez-nicolás, G.; López, R. Erosion-corrosion of stainless steels, titanium, tantalum and zirconium. Wear 2005, 258, 693-700.
10. Charoenpong, H.; Ritprajak, P. Effect of metal ions released from orthodontic mini-implants on osteoclastogenesis. Dent. Med. Probl. 2021, 58, 327-33.
11. Asri, R. I. M.; Harun, W. S. W.; Samykano, M.; et al. Corrosion and surface modification on biocompatible metals: A review. Mater. Sci. Eng. C. Mater. Biol. Appl. 2017, 77, 1261-74.
12. Matsuno, H.; Yokoyama, A.; Watari, F.; Uo, M.; Kawasaki, T. Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium. Biomaterials 2001, 22, 1253-62.
13. Zhou, L.; Yuan, T.; Li, R.; Tang, J.; Wang, G.; Guo, K. Selective laser melting of pure tantalum: Densification, microstructure and mechanical behaviors. Mater. Sci. Eng:. A. 2017, 707, 443-51.
14. Yang, Y.; Zhang, J.; Wei, W. Microstructure and mechanical properties of TiC/Ti6Al4V nanocomposites fabricated by gas-liquid reaction laser powder bed fusion. Mater. Sci. Eng:. A. 2023, 869, 144829.
15. Lei, P.; Qian, H.; Zhang, T.; et al. Porous tantalum structure integrated on Ti6Al4V base by laser powder bed fusion for enhanced bony-ingrowth implants: in vitro and in vivo validation. Bioact. Mater. 2022, 7, 3-13.
16. Lian, F.; Chen, L.; Wu, C.; Zhao, Z.; Tang, J.; Zhu, J. Selective laser melting additive manufactured tantalum: effect of microstructure and impurities on the strengthening-toughing mechanism. Materials. (Basel). 2023, 16, 3161.
17. Valentino, G. M.; Banerjee, A.; Lark, A.; Barr, C. M.; Myers, S. H.; Mccue, I. D. Influence of laser processing parameters on the density-ductility tradeoff in additively manufactured pure tantalum. Addit. Manuf. Lett. 2023, 4, 100117.
18. Song, C.; Deng, Z.; Zou, Z.; Liu, L.; Xu, K.; Yang, Y. Pure tantalum manufactured by laser powder bed fusion: influence of scanning speed on the evolution of microstructure and mechanical properties. Int. J. Refract. Met. Hard. Mater. 2022, 107, 105882.
19. Livescu, V.; Knapp, C. M.; Gray, G. T.; Martinez, R. M.; Morrow, B. M.; Ndefru, B. G. Additively manufactured tantalum microstructures. Materialia 2018, 1, 15-24.
20. Gao, H.; Yang, J.; Jin, X.; et al. Porous tantalum scaffolds: Fabrication, structure, properties, and orthopedic applications. Mater. Des. 2021, 210, 110095.
21. Wauthle, R.; van, der. Stok. J.; Amin, Yavari. S.; et al. Additively manufactured porous tantalum implants. Acta. Biomater. 2015, 14, 217-25.
22. Walker, J.; Middendorf, J. R.; Lesko, C. C.; Gockel, J. Multi-material laser powder bed fusion additive manufacturing in 3-dimensions. Manuf. Lett. 2022, 31, 74-7.
23. Lesko, C.; Walker, J.; Middendorf, J.; Gockel, J. Functionally graded titanium-tantalum in the horizontal direction using laser powder bed fusion additive manufacturing. JOM 2021, 73, 2878-84.
24. Traxel, K. D.; Bandyopadhyay, A. Modeling and experimental validation of additively manufactured tantalum-titanium bimetallic interfaces. Mater. Des. 2021, 207, 109793.
25. Huang, S.; Sing, S. L.; de, Looze. G.; Wilson, R.; Yeong, W. Y. Laser powder bed fusion of titanium-tantalum alloys: compositions and designs for biomedical applications. J. Mech. Behav. Biomed. Mater. 2020, 108, 103775.
26. Yan, J. J.; Zheng, D. L.; Li, H. X.; et al. Selective laser melting of H13: microstructure and residual stress. J. Mater. Sci. 2017, 52, 12476-85.
27. Shabalin, I. L. Tantalum. In Ultra-high temperature materials I: Carbon (graphene/graphite) and refractory metals, Springer,2014; pp. 387-450.
28. Balla, V. K.; Banerjee, S.; Bose, S.; Bandyopadhyay, A. Direct laser processing of a tantalum coating on titanium for bone replacement structures. Acta. Biomater. 2010, 6, 2329-34.
29. Ren, Y.; Lin, X.; Fu, X.; Tan, H.; Chen, J.; Huang, W. Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming. Acta. Materialia. 2017, 132, 82-95.
30. Tang, Y.; Liu, Y.; Peng, Y.; Xiong, W.; Long, J.; Tan, D. Dynamic restoration and texture evolution of pure tantalum during warm deformation. Int. J. Refract. Met. Hard. Mater. 2023, 115, 106279.
31. Yan, M.; Yu, P. An overview of densification, Microstructure and mechanical property of additively manufactured Ti-6Al-4V - comparison among selective laser melting, electron beam melting, laser metal deposition and selective laser sintering, and with conventional powder. In: Lakshmanan A, editor. Sintering. Techniques. of. Materials,. , 2015.
32. Pant, P.; Proper, S.; Luzin, V.; et al. Mapping of residual stresses in as-built Inconel 718 fabricated by laser powder bed fusion: A neutron diffraction study of build orientation influence on residual stresses. Addit. Manuf. 2020, 36, 101501.
33. Nycz, A.; Lee, Y.; Noakes, M.; et al. Effective residual stress prediction validated with neutron diffraction method for metal large-scale additive manufacturing. Mater. Des. 2021, 205, 109751.
34. Heeling, T.; Cloots, M.; Wegener, K. Melt pool simulation for the evaluation of process parameters in selective laser melting. Addit. Manuf. 2017, 14, 116-25.
35. Menon, N.; Basak, A. Prediction of melt pool geometry by fusing experimental and simulation data. Int. J. Mech. Sci. 2024, 263, 108786.
36. Chen, C.; Xia, X.; Yang, S.; et al. Effect of the thickness of Ti intermediate layer on the microstructure and mechanical properties of the W/Ta multilayer composites. J. Alloys. Compd. 2021, 867, 158910.
37. Standardization Administration of China. GB/T 8546-2017: Titanium clad stainless steel plate, Beijing: Standards Press of China; 2017.
38. Zhou, Y. L.; Niinomi, M.; Akahori, T. Effects of Ta content on young’s modulus and tensile properties of binary Ti-Ta alloys for biomedical applications. Mater. Sci. Eng:. A. 2004, 371, 283-90.
39. Sing, S. L.; Yeong, W. Y.; Wiria, F. E. Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties. J. Alloys. Compd. 2016, 660, 461-70.
40. Song, M. L. Effect of laser selective melting process and subsequent heat treatment on the microstructure and properties of Ti-6Al-4V alloy, Shandong University, Master Degree Thesis, Shandong University, Jinan, Shandong, 2021.
41. Schmidt, A. A.; Schmidt, T.; Grabherr, O.; Bartel, D. Transient wear simulation based on three-dimensional finite element analysis for a dry running tilted shaft-bushing bearing. Wear 2018, 408-9, 171-9.
42. Lin, K.; Qiao, J.; Gu, D.; et al. Active screen plasma nitriding of laser powder bed fusion processed 316L stainless steel for the application of fuel cell bipolar plates. Virtual. Phys. Prototyp. 2023, 18, e2225490.
43. Shuai, C.; He, C.; Feng, P.; et al. Biodegradation mechanisms of selective laser-melted Mg- x Al-Zn alloy: grain size and intermetallic phase. Virtual. Phys. Prototyp. 2018, 13, 59-69.
44. Gui, N.; Xu, W.; Myers, D. E.; Shukla, R.; Tang, H. P.; Qian, M. The effect of ordered and partially ordered surface topography on bone cell responses: a review. Biomater. Sci. 2018, 6, 250-64.
45. Burkov, A. A.; Nikolenko, S. V.; Krutikova, V. O.; Shelmenok, N. A. Electrospark Deposition of Ti-Ta coatings on Ti6Al4V titanium alloy: oxidation resistance and wear properties. Phys. Mesomech. 2024, 27, 618-26.
46. Zhao, D.; Han, C.; Li, Y.; et al. Improvement on mechanical properties and corrosion resistance of titanium-tantalum alloys in-situ fabricated via selective laser melting. J. Alloys. Compd. 2019, 804, 288-98.
47. Becker, T.; Cannon, R.; Ritchie, R. An approximate method for residual stress calculation in functionally graded materials. Mech. Mater. 2000, 32, 85-97.
48. National Center for Biotechnology Information, 2024. Atomic Radius in the Periodic Table of Elements. Available from: https://pubchem.ncbi.nlm.nih.gov/periodic-table/atomic-radius (accessed 2025-6-5).
