REFERENCES
1. Geng, X.; Wang, F.; Wu, H.; et al. Data‐driven and artificial intelligence accelerated steel material research and intelligent manufacturing technology. Mater. Genome. Eng. Adv. 2023, 1, e10.
2. Fang, W.; Huang, J.; Peng, T.; Long, Y.; Yin, F. Machine learning-based performance predictions for steels considering manufacturing process parameters: a review. J. Iron. Steel. Res. Int. 2024, 31, 1555-81.
3. Yu, X.; Tan, C. China’s pathway to carbon neutrality for the iron and steel industry. Glob. Environ. Change. 2022, 76, 102574.
4. Wang, H.; Qiu, J.; Ping, X.; et al. Roadmap, current situation, and prospects of low-carbon development technologies in Chinese steel industry. J. Iron. Steel. Res. Int. 2024, 31, 2879-92.
5. Kang, Z.; Liao, Q.; Zhang, Z.; Zhang, Y. Carbon neutrality orientates the reform of the steel industry. Nat. Mater. 2022, 21, 1094-8.
6. Gutiérrez Castañeda, E.; Ruiz Cigarrillo, D.; Torres Castillo, A.; et al. Intercritical continuous cooling transformation diagram for the manufacture of low-alloyed low-carbon multiphase steels. Mater. Lett. 2023, 331, 133528.
7. Geng, X.; Wang, H.; Xue, W.; et al. Modeling of CCT diagrams for tool steels using different machine learning techniques. Comput. Mater. Sci. 2020, 171, 109235.
8. Cao, Y.; Cao, G.; Cui, C.; Li, X.; Wu, S.; Liu, Z. Modeling continuous cooling transformations for HSLA steels with physical metallurgy guided hereditary machine learning. Metall. Mater. Trans. A. 2023, 54, 4891-904.
9. Xu, P.; Ji, X.; Li, M.; Lu, W. Small data machine learning in materials science. npj. Comput. Mater. 2023, 9, 1000.
10. Gao, Z.; Wu, S.; Zhou, X.; et al. Physical-informed machine learning of phase transformation and application to cooling path optimization. J. Iron. Steel. Res. Int. 2026, 33, 1822.
11. Huang, X.; Zhang, B.; Tian, Q.; et al. Machine learning study on time–temperature–transformation diagram of carbon and low-alloy steel. J. Iron. Steel. Res. Int. 2023, 30, 1032-41.
12. Cao, G.; He, Y.; Wang, H.; et al. Machine learning assisted adaptable rolling for high strength steel. J. Iron. Steel. Res. Int. 2026, 33, 1645.
13. Geng, X.; Wang, H.; Ullah, A.; et al. Prediction of continuous cooling transformation diagrams for Ni-Cr-Mo welding steels via machine learning approaches. JOM 2020, 72, 3926-34.
14. Minamoto, S.; Tsukamoto, S.; Kasuya, T.; Watanabe, M.; Demura, M. Prediction of continuous cooling transformation diagram for weld heat affected zone by machine learning. Sci. Technol. Adv. Mater. Methods. 2022, 2, 402-15.
15. Geng, X.; Mao, X.; Wu, H.; et al. A hybrid machine learning model for predicting continuous cooling transformation diagrams in welding heat-affected zone of low alloy steels. J. Mater. Sci. Technol. 2022, 107, 207-15.
16. Zhang, B.; Wang, B.; Xue, W.; Ullah, A.; Zhang, T.; Wang, H. Development of a machine learning model for prediction of continuous cooling transformation diagrams in welding heat-affected zone. J. Mater. Sci. 2023, 58, 4795-808.
17. Rahaman, M.; Mu, W.; Odqvist, J.; Hedström, P. Machine learning to predict the martensite start temperature in steels. Metall. Mater. Trans. A. 2019, 50, 2081-91.
18. Jeon, J.; Sung, Y.; Seo, N.; Jung, J.; Son, S. B.; Lee, S. Machine learning model and prediction mechanisms of bainite start temperature of low alloy steels. Mater. Trans. 2023, 64, 2214-8.
19. Jeon, J.; Seo, N.; Jung, J.; Son, S. B.; Lee, S. Analysis of prediction mechanisms and feature importance of martensite start temperature of alloy steel via explainable artificial intelligence. Mater. Trans. 2023, 64, 2196-201.
20. Zhang, Y.; Cheng, L.; Pan, A.; Hu, C.; Wu, K. Phase transformation temperature prediction in steels via machine learning. Materials 2024, 17, 1117.
21. Dobrzański, L. A.; Trzaska, J. Application of neural networks for the prediction of continuous cooling transformation diagrams. Comput. Mater. Sci. 2004, 30, 251-9.
22. Trzaska, J.; Dobrzański, L. Modelling of CCT diagrams for engineering and constructional steels. J. Mater. Process. Technol. 2007, 192-3, 504-10.
23. Trzaska, J. A new neural networks model for calculating the continuous cooling transformation diagrams. Arch. Metall. Mater. 2018, 63, 2009-15.
24. Chakraborty, S.; Chattopadhyay, P. P.; Ghosh, S. K.; Datta, S. Incorporation of prior knowledge in neural network model for continuous cooling of steel using genetic algorithm. Appl. Soft. Comput. 2017, 58, 297-306.
25. Chakraborty, S.; Das, P.; Kaveti, N. K.; Chattopadhyay, P. P.; Datta, S. MCDM towards knowledge incorporation in ANN models for phase transformation in continuous cooling of steel. Multidiscip. Model. Mater. Struct. 2019, 15, 170-86.
26. Ganguly, S.; Manna, S. Prediction of continuous cooling transformation diagrams in steels using light gradient boosting and rule-based optimization. Mater. Manuf. Process. 2023, 38, 2018-33.
27. Liang, W.; Li, J.; Li, J.; Xiong, X.; Chai, J. Hot deformation characteristics and microstructure evolution of industrial grade AISI M35 high-speed steel produced by ESR. J. Iron. Steel. Res. Int. 2025, 32, 2370-88.
28. Zhang, M.; Wang, C.; Ma, D.; et al. Influence of hot deformation on dynamic recrystallization behavior of a novel austenitic stainless steel. J. Iron. Steel. Res. Int. 2025, 32, 4335-49.
29. Li, X.; Zheng, M.; Pan, H.; Mao, C.; Ding, W. An integrated design of novel RAFM steels with targeted microstructures and tensile properties using machine learning and CALPHAD. J. Mater. Inf. 2024, 4, 27.
30. Song, L.; Wang, C.; Li, Y.; Wei, X. Predicting stacking fault energy in austenitic stainless steels via physical metallurgy-based machine learning approaches. J. Mater. Inf. 2025, 5, 2.
31. Hart-Rawung, T.; Buhl, J.; Bambach, M. A fast approach for optimization of hot stamping based on machine learning of phase transformation kinetics. Procedia. Manuf. 2020, 47, 707-12.
32. Hatta, N.; Kokado, J.; Kikuchi, S.; Takuda, H. Modelling on flow stress of plain carbon steel at elevated temperatures. Steel. Res. 1985, 56, 575-82.
33. Medina, S.; Hernandez, C. General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels. Acta. Mater. 1996, 44, 137-48.
34. Suwanpinij, P.; Rudnizki, J.; Prahl, U.; Bleck, W. Investigation of the effect of deformation on γ‐α phase transformation kinetics in hot-rolled dual phase steel by phase field approach. Steel. Res. Int. 2009, 80, 616-22.
35. Wang, S.; Li, J.; Zeng, L.; Zuo, X.; Chen, N.; Rong, Y. Machine learning for prediction of retained austenite fraction and optimization of processing in quenched and partitioned steels. J. Iron. Steel. Res. Int. 2024, 31, 2002-13.
36. Bassi, A.; Bodas, S. T.; Hasan, S. S.; Sidhu, G.; Srinivasan, S. Predictive modeling of hardness values and phase fraction percentages in micro-alloyed steel during heat treatment using AI. Metals 2024, 14, 49.
37. Li, F.; He, A.; Song, Y.; et al. Deep learning for predictive mechanical properties of hot-rolled strip in complex manufacturing systems. Int. J. Miner. Metall. Mater. 2023, 30, 1093-103.
38. Bräutigam–Matus, K.; Altamirano, G.; Salinas, A.; Flores, A.; Goodwin, F. Experimental determination of continuous cooling transformation (CCT) diagrams for dual-phase steels from the intercritical temperature range. Metals 2018, 8, 674.
39. Liu, C.; Su, H. Prediction of martensite start temperature of steel combined with expert experience and machine learning. Sci. Technol. Adv. Mater. 2024, 25, 2354655.
40. Xiao, F.; Liao, B.; Qiao, G.; Guan, S. Effect of hot deformation on phase transformation kinetics of 86CrMoV7 steel. Mater. Charact. 2006, 57, 306-13.
41. Nikravesh, M.; Naderi, M.; Akbari, G.; Bleck, W. Phase transformations in a simulated hot stamping process of the boron bearing steel. Mater. Design. 2015, 84, 18-24.
42. Kawulok, R.; Kawulok, P.; Schindler, I.; et al. Study of the effect of deformation on transformation diagrams of two low-alloy manganese-chromium steels. Arch. Metall. Mater. 2018, 63, 1735-41.
43. Zhang, R.; Boyd, J. Bainite transformation in deformed austenite. Metall. Mater. Trans. A. 2010, 41, 1448-59.
