REFERENCES

1. Wyatt, B. C.; Nemani, S. K.; Hilmas, G. E.; Opila, E. J.; Anasori, B. Ultra-high temperature ceramics for extreme environments. Nat. Rev. Mater. 2023, 9, 773-89.

2. Xiang, H.; Xing, Y.; Dai, F.; et al. High-entropy ceramics: present status, challenges, and a look forward. J. Adv. Ceram. 2021, 10, 385-441.

3. Shojaie-Bahaabad, M.; Bozorg, M.; Najafizadeh, M.; Cavaliere, P. Ultra high temperature ceramic coatings in thermal protection systems (TPS). Ceram. Int. 2024, 50, 9937-51.

4. Lun, H.; Zeng, Y.; Xiong, X.; et al. Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)C_x carbide solid solution powders in air. J. Adv. Ceram. 2021, 10, 741-57.

5. Harrington, T. J.; Gild, J.; Sarker, P.; et al. Phase stability and mechanical properties of novel high entropy transition metal carbides. Acta. Mater. 2019, 166, 271-80.

6. Wang, X. G.; Guo, W. M.; Kan, Y. M.; Zhang, G. J.; Wang, P. L. Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives. J. Eur. Ceram. Soc. 2011, 31, 1103-11.

7. Yang, Q.; Wang, X.; Bao, W.; et al. Influence of equiatomic Zr/(Ti,Nb) substitution on microstructure and ultra-high strength of (Ti,Zr,Nb)C medium-entropy ceramics at 1900 °C. J. Adv. Ceram. 2022, 11, 1457-65.

8. Huang, S.; Dai, F.; Xiang, X.; et al. Strengthening or softening: on the impact of off-stoichiometry on the mechanical properties of ZrC. Acta. Mater. 2025, 289, 120892.

9. Dai, F.; Sun, Y.; Ren, Y.; Xiang, H.; Zhou, Y. Segregation of solute atoms in ZrC grain boundaries and their effects on grain boundary strengths. J. Mater. Sci. Technol. 2022, 101, 234-41.

10. Hossain, M. D.; Borman, T.; Oses, C.; et al. Entropy landscaping of high-entropy carbides. Adv. Mater. 2021, 33, e2102904.

11. He, L.; Liu, L.; Peng, F.; et al. Host lattice and solid solution formation in an octal-cation (NbTaZrTiHfVWMo)C high entropy carbide ceramic. J. Eur. Ceram. Soc. 2023, 43, 5792-801.

12. Deadmore, D. L. Vaporization of tantalum carbide-hafnium carbide solid solutions. J. Am. Ceram. Soc. 2006, 48, 357-9.

13. Han, X.; Girman, V.; Sedlak, R.; et al. Improved creep resistance of high entropy transition metal carbides. J. Eur. Ceram. Soc. 2020, 40, 2709-15.

14. Ye, B.; Wen, T.; Huang, K.; Wang, C. Z.; Chu, Y. First‐principles study, fabrication, and characterization of (Hf_0.2Zr_0.2Ta_0.2Nb_0.2Ti_0.2)C high‐entropy ceramic. J. Am. Ceram. Soc. 2019, 102, 4344-52.

15. Zeng, Y.; Wang, D.; Xiong, X.; et al. Ablation-resistant carbide Zr_0.8Ti_0.2C_0.74B_0.26 for oxidizing environments up to 3,000 °C. Nat. Commun. 2017, 8, 15836.

16. Sheindlin, M.; Falyakhov, T.; Petukhov, S.; Valyano, G.; Vasin, A. Recent advances in the study of high-temperature behaviour of non-stoichiometric TaC_x, HfC_x and ZrC_x carbides in the domain of their congruent melting point. Adv. Appl. Ceram. 2018, 117, s48-55.

17. Liu, D.; Hou, Y.; Meng, J.; Zhang, A.; Han, J.; Zhang, J. The significant influence of carbon content on mechanical and thermal properties of (VNbTaMoW)_0.5C_x high entropy carbides. J. Eur. Ceram. Soc. 2022, 42, 5262-72.

18. Schmid, B.; Koutná, N.; Ntemou, E.; et al. Mechanical properties of VC/ZrC and VC/HfC superlattices. Acta. Mater. 2024, 270, 119852.

19. Wang, Z.; Yu, Z.; Zhang, L.; et al. Tailoring structural, mechanical, and electronic properties of (Ti_0.25Ta_0.25Zr_0.25Nb_0.25-La )C high-entropy carbide ceramics via rare-earth La incorporation: a comprehensive first-principles study. Ceram. Int. 2025, 51, 33721-30.

20. Chen, L.; Kong, Q.; Liu, Q.; et al. Covalent bonds enhancing and microstructure evolution induced by carbon content in multi-component (TiZrNbMo)C ceramics. J. Materiomics. 2025, 11, 101048.

21. Zhang, Y.; Liu, B.; Wang, J.; Wang, J. Theoretical investigations of the effects of ordered carbon vacancies in ZrC_1-x on phase stability and thermo-mechanical properties. Acta. Mater. 2016, 111, 232-41.

22. Zunger, A.; Wei, S.; Ferreira, L. G.; Bernard, J. E. Special quasirandom structures. Phys. Rev. Lett. 1990, 65, 353-6.

23. Kim, J. First-principles investigation of the elastic properties and phase stability of (Ti_1-xNi_x)C_1-y ternary metastable carbides. J. Alloys. Compd. 2021, 853, 157349.

24. Liu, S.; Qin, L.; Zhang, H.; et al. Design of superhard high-entropy diborides via high-throughput DFT and thermodynamics calculations. Ceram. Int. 2024, 50, 17977-87.

25. Liu, S.; Zhang, S.; Liu, S.; et al. Stability and mechanical properties of single-phase quinary high-entropy metal carbides: first-principles theory and thermodynamics. J. Eur. Ceram. Soc. 2022, 42, 3089-98.

26. Liu, Y.; Lu, Y.; Wang, W. Y.; et al. Effects of solutes on thermodynamic properties of (TMZrU)C (TM = Ta, Y) medium-entropy carbides: a first-principles study. J. Mater. Inf. 2023, 3, 17.

27. Meng, H.; Chu, Y. Surface energies in high‐entropy carbides with variable carbon stoichiometry. J. Am. Ceram. Soc. 2022, 105, 5835-42.

28. Ma, Y.; Wang, Q.; Jiang, B.; et al. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al₂(Ni,Co,Fe,Cr)₁₄ compositions. Acta. Mater. 2018, 147, 213-25.

29. Yuan, J.; Li, Z.; Yang, Y.; et al. Applications of machine learning method in high-performance materials design: a review. J. Mater. Inf. 2024, 4, 14.

30. Wang, W. Y.; Shang, S. L.; Wang, Y.; et al. Atomic and electronic basis for the serrations of refractory high-entropy alloys. NPJ. Comput. Mater. 2017, 3, 23.

31. Bie, X.; Hou, J.; Zhou, X.; Song, J. Sub-stoichiometry and vacancy structures in V/Nb carbide precipitates by cluster expansion and first-principles calculations. Acta. Mater. 2024, 269, 119806.

32. Hu, W.; Xiang, J.; Zhang, Y.; et al. Superstructural nanodomains of ordered carbon vacancies in nonstoichiometric ZrC_0.61. J. Mater. Res. 2012, 27, 1230-6.

33. Gusev, A. I. Phase equilibria, phases and compounds in the Ti-C system. Russ. Chem. Rev. 2002, 71, 439-63.

34. Gusev, A. I.; Rempel, A. A. Order-disorder phase transition channel in niobium carbide. Phys. Stat. Sol. 1986, 93, 71-80.

35. Xiang, J.; Hu, W.; Liu, S.; et al. Spark plasma sintering of the nonstoichiometric ultrafine-grained titanium carbides with nano superstructural domains of the ordered carbon vacancies. Mater. Chem. Phys. 2011, 130, 352-60.

36. Hong, Q.; Van, De. Walle. A. Prediction of the material with highest known melting point fromab initiomolecular dynamics calculations. Phys. Rev. B. 2015, 92, 020104.

37. Gusev, A. I.; Rempel, A. A. Superstructures of non-stoichiometric interstitial compounds and the distribution functions of interstitial atoms. Phys. Stat. Sol. 1993, 135, 15-58.

38. Zeng, Y.; Xiong, X.; Li, G.; Chen, Z.; Sun, W.; Wang, D. Microstructure and ablation behavior of carbon/carbon composites infiltrated with Zr-Ti. Carbon 2013, 54, 300-9.

39. Kresse, G.; Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 1996, 6, 15-50.

40. Kresse, G.; Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B. Condens. Matter. 1996, 54, 11169-86.

41. Kresse, G.; Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B. 1999, 59, 1758-75.

42. Perdew, J. P.; Burke, K.; Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 1996, 77, 3865-8.

43. Momma, K.; Izumi, F. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data. J. Appl. Crystallogr. 2011, 44, 1272-6.

44. Wang, V.; Xu, N.; Liu, J.; Tang, G.; Geng, W. VASPKIT: a user-friendly interface facilitating high-throughput computing and analysis using VASP code. Comput. Phys. Commun. 2021, 267, 108033.

45. Grimme, S.; Ehrlich, S.; Goerigk, L. Effect of the damping function in dispersion corrected density functional theory. J. Comput. Chem. 2011, 32, 1456-65.

46. Ma, D.; Grabowski, B.; Körmann, F.; Neugebauer, J.; Raabe, D. Ab initio thermodynamics of the CoCrFeMnNi high entropy alloy: importance of entropy contributions beyond the configurational one. Acta. Mater. 2015, 100, 90-7.

47. Togo, A.; Tanaka, I. First principles phonon calculations in materials science. Scr. Mater. 2015, 108, 1-5.

48. Togo, A.; Chaput, L.; Tanaka, I.; Hug, G. First-principles phonon calculations of thermal expansion in Ti₃SiC₂,Ti₃AlC₂, and Ti₃GeC₂. Phys. Rev. B. 2010, 81, 174301.

49. Olsson, P.; Blomqvist, J.; Bjerkén, C.; Massih, A. Ab initio thermodynamics investigation of titanium hydrides. Comput. Mater. Sci. 2015, 97, 263-75.

50. Ye, B.; Wen, T.; Nguyen, M. C.; Hao, L.; Wang, C.; Chu, Y. First-principles study, fabrication and characterization of (Zr_0.25Nb_0.25Ti_0.25V_0.25)C high-entropy ceramics. Acta. Mater. 2019, 170, 15-23.

51. Page Y, Saxe P. Symmetry-general least-squares extraction of elastic data for strained materials fromab initio calculations of stress. Phys. Rev. B. 2002, 65, 104104.

52. Wu, X.; Vanderbilt, D.; Hamann, D. R. Systematic treatment of displacements, strains, and electric fields in density-functional perturbation theory. Phys. Rev. B. 2005, 72, 035105.

53. Zakarian, D.; Khachatrian, A.; Firstov, S. Universal temperature dependence of Young’s modulus. Metal. Powder. Rep. 2019, 74, 204-6.

54. Réjasse, F.; Trolliard, G.; Léchelle, J.; et al. Study of the TiC_1-x - TiO₂ reactive interface. Acta. Mater. 2018, 146, 225-36.

55. Luo, Z.; Du, Y.; Mao, H.; Tang, S.; Peng, Y.; Liu, Z. Phase field simulation of the lamellar precipitation in the TiC-ZrC system. Ceram. Int. 2018, 44, 22041-4.

56. Lei, J.; Okimura, H.; Brittain, J. O. The electrical resistance of the group IV transition metal monocarbides and mononitrides in the temperature range 20-1000 °C. Mater. Sci. Eng. A. 1990, 123, 129-40.

57. Mahday, A. A.; Sherif, El-Eskandarany. M.; Ahmed, H.; Amer, A. Mechanically induced solid state carburization for fabrication of nanocrystalline ZrC refractory material powders. J. Alloys. Compd. 2000, 299, 244-53.

58. Sara, R. V. The system zirconium - carbon. J. Am. Ceram. Soc. 2006, 48, 243-7.

59. Zhou, Y.; Watts, J.; Li, C.; Fahrenholtz, W. G.; Hilmas, G. E. Vacancy ordering in zirconium carbide with different carbon contents. J. Eur. Ceram. Soc. 2023, 43, 5814-21.

60. Lun, H.; Yuan, J.; Zeng, Y.; Xiong, X.; Wang, Q.; Ye, Z. Mechanisms responsible for enhancing low‐temperature oxidation resistance of nonstoichiometric (Zr,Ti)C. J. Am. Ceram. Soc. 2022, 105, 5309-24.

61. Lu, W.; Xu, J.; Huang, S.; et al. The coupling of carbon non-stoichiometry and short-range order in governing mechanical properties of high-entropy ceramics. NPJ. Comput. Mater. 2025, 11, 64.

62. Kim, H.; Kim, M.; Kim, J.; Kim, J. Enhancing the hydrogen storage properties of (Ti, M)C_1-x materials (M = W, Mg, Ni, and Al) depends on the carbon vacancies: potential for the recycling of scraps. Int. J. Refract. Met. Hard. Mater. 2024, 118, 106475.

63. Baranov, V. M.; Knyazev, V. I.; Korostin, O. S. The temperature dependence of the elastic constants of nonstoichiometric zirconium carbides. Strength. Mater. 1973, 5, 1074-7.

64. Sangiovanni, D.; Tasnádi, F.; Harrington, T.; Odén, M.; Vecchio, K.; Abrikosov, I. Temperature-dependent elastic properties of binary and multicomponent high-entropy refractory carbides. Mater. Des. 2021, 204, 109634.

65. Evitts, L.; Middleburgh, S.; Kardoulaki, E.; Ipatova, I.; Rushton, M.; Lee, W. Influence of boron isotope ratio on the thermal conductivity of uranium diboride (UB₂) and zirconium diboride (ZrB₂). J. Nucl. Mater. 2020, 528, 151892.

66. Esters, M.; Oses, C.; Hicks, D.; et al. Settling the matter of the role of vibrations in the stability of high-entropy carbides. Nat. Commun. 2021, 12, 5747.

67. Markström, A.; Andersson, D.; Frisk, K. Combined ab-initio and experimental assessment of A_1-xB_xC mixed carbides. Calphad 2008, 32, 615-23.

68. Razumovskiy, V.; Ruban, A.; Odqvist, J.; Dilner, D.; Korzhavyi, P. Effect of carbon vacancies on thermodynamic properties of TiC-ZrC mixed carbides. Calphad 2014, 46, 87-91.