REFERENCES
1. Setiawan, D.; Lee, H.; Pyun, J.; et al. Magnesium alloys as alternative anode materials for rechargeable magnesium-ion batteries: review on the alloying phase and reaction mechanisms. J. Magnes. Alloys. 2024, 12, 3476-90.
2. Zhang, J.; Liu, M.; Qi, J.; et al. Advanced Mg-based materials for energy storage: fundamental, progresses, challenges and perspectives. Prog. Mater. Sci. 2025, 148, 101381.
3. Yang, H.; Xie, W.; Song, J.; et al. Current progress of research on heat-resistant Mg alloys: a review. Int. J. Miner. Metall. Mater. 2024, 31, 1406-25.
4. Ovri, H.; Markmann, J.; Barthel, J.; Kruth, M.; Dieringa, H.; Lilleodden, E. T. Mechanistic origin of the enhanced strength and ductility in Mg-rare earth alloys. Acta. Mater. 2023, 244, 118550.
5. Wei, J.; Wang, Q.; Cai, H.; Ebrahimi, M.; Lei, C. Microstructure and impact behavior of Mg-4Al-5RE-xGd cast magnesium alloys. J. Magnes. Alloys. 2024, 12, 1799-814.
6. Wang, K.; Wang, X.; Dang, C.; et al. Achieving ultrahigh strength in pre-ageing-extruded Mg-Gd-Y-Zn-Mn alloys via ageing treatment. J. Mater. Res. Technol. 2023, 25, 7169-79.
7. Huang, Y.; Wan, Y.; Liu, C.; Jiang, S.; Gao, Y.; Chen, Z. Effect of forging temperature on the microstructure, subsequent aging precipitation behavior, and mechanical properties of Mg-Gd-Y-Zr-Ag alloy. J. Mater. Sci. Technol. 2024, 181, 41-57.
8. Hua, Z.; Li, M.; Wang, C.; et al. Pre-strain mediated fast natural aging in a dilute Mg-Zn-Ca-Sn-Mn alloy. Scr. Mater. 2021, 200, 113924.
9. Bian, M.; Sasaki, T.; Nakata, T.; et al. Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting. Acta. Mater. 2018, 158, 278-88.
10. Li, Z. H.; Sasaki, T. T.; Bian, M. Z.; et al. Role of Zn on the room temperature formability and strength in Mg–Al–Ca–Mn sheet alloys. J. Alloys. Compd. 2020, 847, 156347.
11. Zhai, H.; Wang, L.; Wang, Q.; et al. Achieving high strength near 400 MPa in an ultra-fine grained Mg–Bi–Ca ternary alloy via low-temperature extrusion. J. Mater. Res. Technol. 2023, 26, 3973-91.
12. Wang, H.; Zhang, D.; Qiu, C.; Zhang, W.; Chen, D. Achieving superior strength-ductility synergy in a heterostructured magnesium alloy via low-temperature extrusion and low-temperature annealing. JMater. Sci. Technol. 2023, 163, 32-44.
13. Liu, X.; Qiao, X.; Pei, R.; Chi, Y.; Yuan, L.; Zheng, M. Role of extrusion rate on the microstructure and tensile properties evolution of ultrahigh-strength low-alloy Mg-1.0Al-1.0Ca-0.4Mn (wt.%) alloy. J. Magnes. Alloys. 2023, 11, 553-61.
14. Zhang, J.; Peng, P.; Yang, Q.; Luo, A. A. Bimodal grain structure formation and strengthening mechanisms in Mg-Mn-Al-Ca extrusion alloys. J. Magnes. Alloys. 2023, 11, 4407-19.
15. Huo, P. D.; Li, F.; Xu, H. Y.; Niu, W. T.; Gao, R. H. Achieving large-scale gradient structure in the AZ31 magnesium alloys for extraordinary strength-ductility synergy by hard plate rolling. J. Alloys. Compd. 2023, 944, 169176.
16. Thanabal, N.; Silambarasan, R.; Seenuvasaperumal, P.; Basha, D. A.; Elayaperumal, A. Microstructure and mechanical behavior of AXM Mg alloy systems - a review. J. Magnes. Alloys. 2024, 12, 2624-46.
17. Lee, J.; Kim, M.; Lee, Y. Design of high strength medium-Mn steel using machine learning. Mater. Sci. Eng. A. 2022, 843, 143148.
18. Li, X.; Zheng, M.; Pan, H.; Mao, C.; Ding, W. An integrated design of novel RAFM steels with targeted microstructures and tensile properties using machine learning and CALPHAD. J. Mater. Inf. 2024, 4, 27.
19. Yuan, Y.; Sui, Y.; Li, P.; Quan, M.; Zhou, H.; Jiang, A. Multi-model integration accelerates Al-Zn-Mg-Cu alloy screening. J. Mater. Inf. 2024, 4, 23.
20. Qin, X.; Zhai, H.; Wang, L.; Xia, S.; Jiang, B.; Wang, Q. A novel multimodal feature fusion convolutional neural network to predict the mechanical properties of magnesium alloys. Mater. Lett. 2024, 370, 136863.
21. Hairani, H.; Widiyaningtyas, T.; Dwi, P. D. Addressing class imbalance of health data: a systematic literature review on modified synthetic minority oversampling technique (SMOTE) strategies. JOIV. Int. J. Inform. Vis. 2024, 8, 1310.
22. Low, A. K.; Vissol-gaudin, E.; Lim, Y.; Hippalgaonkar, K. Mapping pareto fronts for efficient multi-objective materials discovery. J. Mater. Inf. 2023, 3, 11.
23. Wang, Q.; Qin, X.; Xia, S.; et al. Interpretable machine learning excavates a low-alloyed magnesium alloy with strength-ductility synergy based on data augmentation and reconstruction. J. Magnes. Alloys.2025, In Press.
24. Habeb, A. A. A. A.; Taresh, M. M.; Li, J.; Gao, Z.; Zhu, N. Enhancing medical image classification with an advanced feature selection algorithm: a novel approach to improving the cuckoo search algorithm by incorporating caputo fractional order. Diagnostics 2024, 14, 1191.
25. Zhang, W.; Li, P.; Wang, L.; et al. Prediction of the yield strength of as-cast alloys using the random forest algorithm. Mater. Today. Commun. 2024, 38, 108520.
26. Jiang, L.; Wang, C.; Fu, H.; Shen, J.; Zhang, Z.; Xie, J. Discovery of aluminum alloys with ultra-strength and high-toughness via a property-oriented design strategy. J. Mater. Sci. Technol. 2022, 98, 33-43.
27. Xu, S.; Oh-ishi, K.; Kamado, S.; Takahashi, H.; Homma, T. Effects of different cooling rates during two casting processes on the microstructures and mechanical properties of extruded Mg–Al–Ca–Mn alloy. Mater. Sci. Eng. A. 2012, 542, 71-8.
28. Zeng, Z. R.; Zhu, Y. M.; Nie, J. F.; Xu, S. W.; Davies, C. H. J.; Birbilis, N. Effects of calcium on strength and microstructural evolution of extruded alloys based on Mg-3Al-1Zn-0.3Mn. Metall. Mater. Trans. A. 2019, 50, 4344-63.
29. Song, L.; Lu, Y.; Zhang, Y.; Li, X.; Cong, M.; Xu, W. The effect of Ca addition on microstructure and mechanical properties of extruded AZ31 alloys. Vacuum 2019, 168, 108822.
30. Li, Z.; Zhang, X.; Zheng, M.; et al. Effect of Ca/Al ratio on microstructure and mechanical properties of Mg-Al-Ca-Mn alloys. Mater. Sci. Eng. A. 2017, 682, 423-32.
31. Jiang, Z.; Jiang, B.; Yang, H.; Yang, Q.; Dai, J.; Pan, F. Influence of the Al2Ca phase on microstructure and mechanical properties of Mg–Al–Ca alloys. J. Alloys. Compd. 2015, 647, 357-63.
32. Yang, A.; Nie, K.; Deng, K.; Li, Y. Improved tensile properties of low-temperature and low-speed extruded Mg–χAl–(4.8−χ)Ca–0.6Mn alloys. J. Mater. Res. Technol. 2020, 9, 11717-30.
33. Zhang, Z.; Xia, S.; Chen, X.; et al. Achieving ultra-high extrusion speed and strength-ductility synergy in a BAZ531 magnesium alloy via differential-thermal extrusion. Mater. Sci. Eng. A. 2025, 923, 147687.
34. Xiao, Z.; Xu, S.; Huang, W.; et al. Unexpected effects on creep resistance of an extruded Mg-Bi alloy by Zn and Ca co-addition: experimental studies and first-principles calculations. J. Mater. Sci. Technol. 2024, 201, 166-86.
35. Peng, P.; He, X.; She, J.; et al. Novel low-cost magnesium alloys with high yield strength and plasticity. Mater. Sci. Eng. A. 2019, 766, 138332.
36. Jiang, C.; Lu, B.; Pan, H.; et al. Effect of Al addition on microstructure and mechanical property of Mg-Mn-Ca-Ce based alloy. J. Alloys. Compd. 2024, 1005, 175975.
37. Zhang, W.; Shen, Z.; Pan, H.; et al. Enhancing strength and irradiation tolerance of Mg alloy via co-addition of Mn and Ca elements. J. Mater. Sci. Technol. 2025, 216, 38-51.
38. Zhu, Y.; Ameyama, K.; Anderson, P. M.; et al. Heterostructured materials: superior properties from hetero-zone interaction. Mater. Res. Lett. 2021, 9, 1-31.
39. Chen, X.; Zhang, J.; Wang, M.; et al. Research progress of heterogeneous structure magnesium alloys: a review. J. Magnes. Alloys. 2024, 12, 2147-81.
40. Liu, C.; Chen, X.; Chen, J.; Atrens, A.; Pan, F. The effects of Ca and Mn on the microstructure, texture and mechanical properties of Mg-4 Zn alloy. J. Magnes. Alloys. 2021, 9, 1084-97.
41. Pan, H.; Kang, R.; Li, J.; et al. Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy. Acta. Mater. 2020, 186, 278-90.
42. Nie, J. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys. Scr. Mater. 2003, 48, 1009-15.
43. Lan, Y.; Jia, M. Multiple strengthening mechanisms of grain/twin boundaries, dislocations and nanoprecipitates in Mg alloys induced by laser shock processing. Mater. Today. Commun. 2024, 38, 107645.
44. Fu, W.; Dang, P.; Guo, S.; et al. Heterogeneous fiberous structured Mg-Zn-Zr alloy with superior strength-ductility synergy. J. Mater. Sci. Technol. 2023, 134, 67-80.
45. Xu, J.; Guan, B.; Xin, Y.; et al. The mechanism for Li-addition induced homogeneous deformation in Mg-4.5wt.% Li alloy. Inter. J. Plast. 2023, 170, 103763.
46. Wu, Z.; Ahmad, R.; Yin, B.; Sandlöbes, S.; Curtin, W. A. Mechanistic origin and prediction of enhanced ductility in magnesium alloys. Science 2018, 359, 447-52.
47. Zhu, G.; Wang, L.; Zhou, H.; et al. Improving ductility of a Mg alloy via non-basal <a> slip induced by Ca addition. Int. J. Plast. 2019, 120, 164-79.
48. Gu, G.; Ke, X.; Hu, F.; et al. Fine-grained Mg–1Mn–0.5Al–0.5Ca–0.5Zn alloy with high strength and good ductility fabricated by conventional extrusion. Trans. Nonferrous. Met. Soc. China. 2022, 32, 483-92.
