fig20

Figure 20. CT-driven design and experimental verification of additive manufactured Ti-modified Al-Cu-Mg alloys: (A) T vs. (fs)1/2 curves of Al-Cu-Mg-xTi alloys with Ti contents ranging from 0 to 2 wt%; (B) calculated Qtrue values in Ti/Al-Cu-Mg alloys for constrained L→α-Al solidification with Ti contents ranging from 0 to 2 wt%; EBSD orientation maps from side view of SLM-fabricated (C) Al-Cu-Mg and (D) Ti-modified Al-Cu-Mg alloys. Figure reproduced from Ref.[186] with permission from Elsevier.