REFERENCES
1. Liu, Y.; Ma, S.; Rosebrock, M.; et al. Tungsten nanoparticles accelerate polysulfides conversion: a viable route toward stable room‐temperature sodium-sulfur batteries. Adv. Sci. 2022, 9, 2105544.
2. Yu, J.; Kim, D. K.; Oh, H. G.; Park, S. K.; Yoo, Y. N, P co‐doped 3D porous carbon with self‐assembled morphological control via template‐free method for potassium‐ion battery anodes. Rare. Met. 2024, 43, 4243-52.
3. M Subramaniyam, C.; Kuhn, A.; González, E. G.; Guerrero-pérez, O.; Rodríguez-castellón, E.; García-alvarado, F. Cost effective synthesis of 3-dimensional V4O9: a promising high-capacity lithium cathode. Catal. Today. 2024, 429, 114507.
4. Senguttuvan, P.; Lee, E.; Key, B.; Johnson, C. S. Synthesis, structural and electrochemical properties of V4O9 cathode for lithium batteries. Front. Chem. 2023, 11, 1161053.
5. Mishra, Y.; Chattaraj, A.; Aljabali, A. A.; El-tanani, M.; Tambuwala, M. M.; Mishra, V. Graphene oxide-lithium-ion batteries: inauguration of an era in energy storage technology. Clean. Energy. 2024, 8, 194-205.
6. Kong, J.; Su, Z.; Dong, C.; Chen, Q.; Pan, G. Overview of coals as carbon anode materials for sodium-ion batteries. Clean. Energy. 2024, 8, 197-218.
7. Yao, G.; Li, Z.; Zhang, Y.; et al. Highly flexible carbon film implanted with single‐atomic Zn-N2 moiety for long‐life sodium‐sulfur batteries. Adv. Funct. Mater. 2023, 34, 2214353.
8. Fan, Y.; Su, D.; Zheng, Y.; et al. Anionic MOF‐derived Ni/Ni1‐xO heterojunctions with electrochemically induced vacancy reconstruction: enabling high‐rate and stable room‐temperature Na-S batteries. Adv. Energy. Mater. 2025, 16, e04080.
9. Xiao, T.; Fang, Z.; Ran, N.; et al. Amorphous/crystalline interwoven multipods with high Co/Ni activity for wide-temperature-range sodium-sulfur batteries. Nat. Commun. 2026, 17, 2333.
10. He, J.; Bhargav, A.; Shin, W.; Manthiram, A. Stable dendrite-free sodium-sulfur batteries enabled by a localized high-concentration electrolyte. J. Am. Chem. Soc. 2021, 143, 20241-8.
11. Zhou, J.; Yang, Y.; Zhang, Y.; et al. Sulfur in amorphous silica for an advanced room‐temperature sodium-sulfur battery. Angew. Chem. Int. Ed. 2021, 60, 10129-36.
12. Pu, X.; Zheng, Y.; Qi, A.; et al. Understanding and illustrating the irreversible self‐discharge in rechargeable batteries by the Evans Diagram. Carbon. Neutraliz. 2024, 3, 94-107.
13. Ye, X.; Ruan, J.; Pang, Y.; et al. Enabling a stable room-temperature sodium-sulfur battery cathode by building heterostructures in multichannel carbon fibers. ACS. Nano. 2021, 15, 5639-48.
14. Chen, S.; Liang, L.; Li, Y.; et al. Brain capillary‐inspired self‐assembled covalent organic framework membrane for sodium-sulfur battery separator. Adv. Energy. Mater. 2023, 13, 2204334.
15. Wu, Y.; Huang, J.; Zhang, Z.; et al. Recent advances in functionalized separators for shuttle-free and dendrite-free lithium/sodium-sulfur batteries. Energy. Mater. 2025, 5, 500027.
16. Xiong, Z.; Chen, S.; Guo, J.; et al. In situ observation of Na2S growth: a step toward high‐energy and safer room temperature sodium sulfur batteries. Adv. Mater. 2025, 38, e05966.
17. Wang, Y. X.; Zhang, B.; Lai, W.; et al. Room‐temperature sodium‐sulfur batteries: a comprehensive review on research progress and cell chemistry. Adv. Energy. Mater. 2017, 7, 1602829.
18. Zhou, F.; Wu, Q.; Meng, J.; Xu, J.; Cao, F. Rare-earth-based strategies for lithium-sulfur batteries: enhancing multi-electron conversion reaction kinetics. Energy. Z. 2025, 1.
19. Devi, R.; Kumar, V.; Kumar, S.; et al. Recent advancement in biomass-derived activated carbon for waste water treatment, energy storage, and gas purification: a review. J. Mater. Sci. 2023, 58, 12119-42.
20. Global demand for activated carbon to exceed two million metric tons in 2018. https://www.watertechonline.com/home/article/15545270/global-demand-for-activated-carbon-to-exceed-two-million-metric-tons-in-2018. (accessed 2026-05-18).
21. Li, C.; Zhao, X.; Pang, T.; Hu, N.; Zheng, T. Multiphysics simulation and optimization of microwave-assisted regeneration of spent activated carbon for enhanced energy efficiency. Environ. Res. 2025, 285, 122292.
22. Chen, X.; Tian, Z.; Yang, Q.; et al. Cost‐effective H2O2‐regeneration of powdered activated carbon by isolated Fe sites. Adv. Sci. 2022, 10, 2204079.
23. Ayaz, M.; Shah, S. S.; Younas, M.; et al. Green synthesis of activated carbon from biomass waste of date palm seeds: a sustainable solution for energy storage and environmental impact. J. Energy. Storage. 2025, 110, 115291.
24. Liu, Z.; Liu, L.; Fu, Y.; et al. In situ regeneration of phenol-saturated activated carbon fiber via an electro-permanganate process. J. Water. Process. Eng. 2025, 72, 107654.
25. Sousa, É.; Rocha, L.; Jaria, G.; et al. Optimizing microwave-assisted production of waste-based activated carbons for the removal of antibiotics from water. Sci. Total. Environ. 2021, 752, 141662.
26. Wang, P.; Sun, S.; Rui, X.; et al. Polar Electrocatalysts for preventing polysulfide migration and accelerating redox kinetics in room‐temperature sodium-sulfur batteries. Small. Methods. 2023, 7, 2201728.
27. Jin, F.; Wang, B.; Wang, J.; et al. Boosting electrochemical kinetics of S cathodes for room temperature Na/S batteries. Matter 2021, 4, 1768-800.
28. Eng, A. Y. S.; Kumar, V.; Zhang, Y.; et al. Room‐temperature sodium-sulfur batteries and beyond: realizing practical high energy systems through anode, cathode, and electrolyte engineering. Adv. Energy. Mater. 2021, 11, 2003493.
29. Mei, T.; Li, X.; Lin, X.; Bai, L.; Xu, M.; Qi, Y. Cobalt catalytic regulation engineering in room‐temperature sodium-sulfur batteries: facilitating rapid polysulfides conversion and delicate Na2S nucleation. Adv. Funct. Mater. 2024, 35, 2418126.
30. Ceylan Cengiz, E.; Erdol, Z.; Sakar, B.; et al. Investigation of the effect of using Al2O3-nafion barrier on room-temperature Na-S batteries. J. Phys. Chem. C. 2017, 121, 15120-6.
31. Kresse, G.; Hafner, J. Ab initiomolecular dynamics for liquid metals. Phys. Rev. B. 1993, 47, 558-61.
32. Kresse, G.; Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comp. Mater. Sci. 1996, 6, 15-50.
33. Kresse, G.; Furthmüller, J. Efficient iterative schemes forab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B. 1996, 54, 11169-86.
34. Kresse, G.; Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B. 1999, 59, 1758-75.
35. Perdew, J. P.; Burke, K.; Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 1996, 77, 3865-8.
36. Grimme, S.; Antony, J.; Ehrlich, S.; Krieg, H. A consistent and accurateab initioparametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. J. Chem. Phys. 2010, 132, 154104.
37. Xiao, F.; Yang, X.; Wang, H.; et al. Covalent encapsulation of sulfur in a MOF‐derived S, N‐doped porous carbon host realized via the vapor‐infiltration method results in enhanced sodium-sulfur battery performance. Adv. Energy. Mater. 2020, 10, 2000931.
38. He, S.; Yang, J.; Liu, S.; et al. Asymmetric N-coordinated iron single-atom catalysts supported on graphitic carbon for polysulfide conversion in lithium-sulfur batteries. Chem. Eng. J. 2023, 454, 140202.
39. Zhang, M.; Mu, J.; Li, Y.; et al. Propelling polysulfide redox by Fe3C-FeN heterostructure@nitrogen-doped carbon framework towards high-efficiency Li-S batteries. J. Energy. Chem. 2023, 78, 105-14.
40. Jing, W.; Tan, Q.; Duan, Y.; et al. Defect‐rich single atom catalyst enhanced polysulfide conversion kinetics to upgrade performance of Li-S batteries. Small 2022, 19, 2204880.
41. Saroha, R.; Lee, J. S.; Cho, S. W.; Cho, C.; Park, J.; Cho, J. S. Polysulfide barrier comprising bismuth selenide nanocrystals well anchored within N-doped carbon microspheres for stable Li-S batteries. Energy. Mater. 2025, 5, 500089.
42. Lin, C.; Zhang, J.; Lim, Y. V.; et al. 3D hierarchical architectures of CoSe2 nanoparticles embedded in rice‐derived hard carbon for advanced sodium storage. Carbon. Neutraliz. 2022, 1, 224-32.
43. Xiao, F.; Wang, H.; Xu, J.; et al. Generating short‐chain sulfur suitable for efficient sodium-sulfur batteries via atomic copper sites on a N,O‐codoped carbon composite. Adv. Energy. Mater. 2021, 11, 2100989.
44. Zheng, F.; Zhang, Y.; Ding, G.; et al. Pentagon defects accelerating polysulfides conversion enabled high‐performance sodium-sulfur batteries. Adv. Funct. Mater. 2023, 34, 2310598.
45. Zhang, B.; Sheng, T.; Liu, Y.; et al. Atomic cobalt as an efficient electrocatalyst in sulfur cathodes for superior room-temperature sodium-sulfur batteries. Nat. Commun. 2018, 9, 4082.
46. Yan, Z.; Xiao, J.; Lai, W.; et al. Nickel sulfide nanocrystals on nitrogen-doped porous carbon nanotubes with high-efficiency electrocatalysis for room-temperature sodium-sulfur batteries. Nat. Commun. 2019, 10, 4793.
47. Yang, W.; Yang, W.; Zou, R.; et al. Cellulose nanofiber‐derived carbon aerogel for advanced room‐temperature sodium-sulfur batteries. Carbon. Energy. 2022, 5, e203.
48. Zhang, Y.; Guo, X.; Yang, Q.; et al. Chemical and spatial dual-confinement engineering for stable Na-S batteries with approximately 100% capacity retention. Proc. Natl. Acad. Sci. U.S.A. 2023, 120, e2314408120.
49. Du, W.; Xu, Q.; Zhan, R.; Zhang, Y.; Luo, Y.; Xu, M. Synthesis of hollow porous carbon microspheres and their application to room-temperature Na-S batteries. Mater. Lett. 2018, 221, 66-9.
50. Ma, Q.; Du, G.; Guo, B.; et al. Carbon-wrapped cobalt nanoparticles on graphene aerogel for solid-state room-temperature sodium-sulfur batteries. Chem. Eng. J. 2020, 388, 124210.
51. Guo, B.; Du, W.; Yang, T.; et al. Nickel hollow spheres concatenated by nitrogen‐doped carbon fibers for enhancing electrochemical kinetics of sodium-sulfur batteries. Adv. Sci. 2019, 7, 1902617.
52. Ye, C.; Jin, H.; Shan, J.; et al. A Mo5N6 electrocatalyst for efficient Na2S electrodeposition in room-temperature sodium-sulfur batteries. Nat. Commun. 2021, 12, 7195.
53. Hu, P.; Xiao, F.; Wu, Y.; et al. Covalent encapsulation of sulfur in a graphene/N-doped carbon host for enhanced sodium-sulfur batteries. Chem. Eng. J. 2022, 443, 136257.
54. Tang, W.; Zhong, W.; Wu, Y.; et al. Vanadium carbide nanoparticles incorporation in carbon nanofibers for room-temperature sodium sulfur batteries: confining, trapping, and catalyzing. Chem. Eng. J. 2020, 395, 124978.
55. Ye, C.; Jiao, Y.; Chao, D.; et al. Electron‐state confinement of polysulfides for highly stable sodium-sulfur batteries. Adv. Mater. 2020, 32, 1907557.
56. Du, W.; Wu, Y.; Yang, T.; et al. Rational construction of rGO/VO2 nanoflowers as sulfur multifunctional hosts for room temperature Na-S batteries. Chem. Eng. J. 2020, 379, 122359.
57. Lu, Q.; Wang, X.; Cao, J.; et al. Freestanding carbon fiber cloth/sulfur composites for flexible room-temperature sodium-sulfur batteries. Energy. Storage. Mater. 2017, 8, 77-84.
58. Yang, Q.; Yang, T.; Gao, W.; et al. An MXene-based aerogel with cobalt nanoparticles as an efficient sulfur host for room-temperature Na-S batteries. Inorg. Chem. Front. 2020, 7, 4396-403.
