REFERENCES
1. Song, W.; Ye, Q.; Chen, Z.; Ge, J.; Xie, L.; Ge, Z. Advances in stretchable organic photovoltaics: flexible transparent electrodes and deformable active layer design. Adv. Mater. 2024, 36, e2311170.
2. Ren, J.; Wang, J.; Qiao, J.; et al. Manipulating aggregation kinetics toward efficient all-printed organic solar cells. Adv. Mater. 2025, 37, e2418353.
3. Brabec, C. J.; Distler, A.; Du, X.; et al. Material strategies to accelerate OPV technology toward a GW technology. Adv. Energy. Mater. 2020, 10, 2001864.
4. Li, C.; Song, J.; Lai, H.; et al. Non-fullerene acceptors with high crystallinity and photoluminescence quantum yield enable > 20% efficiency organic solar cells. Nat. Mater. 2025, 24, 433-43.
5. Zhu, L.; Zhang, M.; Zhou, G.; et al. Achieving 20.8% organic solar cells via additive-assisted layer-by-layer fabrication with bulk p-i-n structure and improved optical management. Joule 2024, 8, 3153-68.
6. Cheng, B.; Xia, X.; Cheng, S.; et al. Precise control over crystallization kinetics by combining nucleating agents and plasticizers for 20.1% efficiency organic solar cells. Adv. Mater. 2025, 37, e2500357.
7. Li, Q.; Sun, Y.; Yang, C.; et al. Optimizing the component ratio of PEDOT:PSS by water rinse for high efficiency organic solar cells over 16.7. Sci. Bull. 2020, 65, 747-52.
8. Yang, Q.; Yu, S.; Fu, P.; et al. Boosting performance of non‐fullerene organic solar cells by 2D g‐C3N4 doped PEDOT:PSS. Adv. Funct. Mater. 2020, 30, 1910205.
9. Yang, X.; Sun, R.; Wang, Y.; et al. Ternary all-polymer solar cells with efficiency up to 18.14% employing a two-step sequential deposition. Adv. Mater. 2023, 35, e2209350.
10. Jørgensen, M.; Norrman, K.; Krebs, F. C. Stability/degradation of polymer solar cells. Sol. Energy. Mater. Sol. Cells. 2008, 92, 686-714.
11. Lin, Y.; Firdaus, Y.; Isikgor, F. H.; et al. Self-assembled monolayer enables hole transport layer-free organic solar cells with 18% efficiency and improved operational stability. ACS. Energy. Lett. 2020, 5, 2935-44.
12. Guan, S.; Li, Y.; Xu, C.; et al. Self-assembled interlayer enables high-performance organic photovoltaics with power conversion efficiency exceeding 20. Adv. Mater. 2024, 36, e2400342.
13. Fan, B.; Gao, H.; Li, Y.; et al. Integration of polyoxometalate clusters with self-assembled monolayer for efficient and robust organic solar cells. Joule 2024, 8, 1443-56.
14. Xie, J.; Lin, W.; Zheng, K.; Liang, Z. N-doping donor-dilute semitransparent organic solar cells to weaken donor: acceptor miscibility and consolidate donor-phase continuity. Adv. Sci. 2024, 11, e2404135.
15. Chen, Z.; Ge, J.; Song, W.; et al. 20.2% efficiency organic photovoltaics employing a π-extension quinoxaline-based acceptor with ordered arrangement. Adv. Mater. 2024, 36, e2406690.
16. Azeez, A.; Huang, Y.; Stanly, L.; Kan, Z.; Karuthedath, S. Advances in self-assembled monolayer-engineered organic solar cells. EES. Sol. 2025, 1, 248-66.
17. Chen, Q.; Sun, K.; Franco, L. R.; et al. Effects of alkyl spacer length in carbazole-based self-assembled monolayer materials on molecular conformation and organic solar cell performance. Adv. Sci. 2025, 12, e2410277.
18. Lee, M. J.; Park, J.; Kim, T. H.; Saeed, M. A.; Lee, G. M.; Shim, J. W. Tailoring hole-selective contacts via self-assembled monolayers for advancing indoor organic photovoltaic and capacitor devices. Chem. Eng. J. 2024, 481, 148481.
19. Li, M.; Li, Z.; Fu, H.; et al. Molecularly engineered self-assembled monolayers as effective hole-selective layers for organic solar cells. ACS. Appl. Energy. Mater. 2024, 7, 1306-12.
20. Lin, Y.; Zhang, Y.; Zhang, J.; et al. 18.9% efficient organic solar cells based on n‐doped bulk-heterojunction and halogen-substituted self-assembled monolayers as hole extracting interlayers. Adv. Energy. Mater. 2022, 12, 2202503.
21. Geng, R.; Gao, S.; Liu, J.; et al. Tunning interfacial interaction strategy by asymmetric configuration to construct self-assembly materials for efficient organic solar cells. Chem. Eng. J. 2024, 483, 149035.
22. Chen, Q.; Wu, J.; Gumbo, M.; et al. Organic solar cells with 20.12% efficiency enabled by monosubstituted carbazole-based self-assembled monolayers. ACS. Energy. Lett. 2025, 10, 5584-95.
23. Du, Y.; Zhao, Q.; Yuan, Q.; et al. Boosting the dipole effect of self-assembled monolayers via an asymmetric sulfur functionalization strategy. ACS. Appl. Energy. Mater. 2025, 8, 12294-302.
24. Liu, L.; Yu, F.; Hu, D.; et al. Breaking the symmetry of interfacial molecules with push-pull substituents enables 19.67% efficiency organic solar cells featuring enhanced charge extraction. Energy. Environ. Sci. 2025, 18, 1722-31.
25. Guo, C.; Du, H. Q.; Wang, Y. C.; et al. Bifacially reinforced self-assembled monolayer interfaces for minimized recombination loss and enhanced stability in perovskite/silicon tandem solar cells. Adv. Mater. 2025, 37, e2504520.
26. Yu, X.; Ding, P.; Yang, D.; et al. Self-assembled molecules with asymmetric backbone for highly stable binary organic solar cells with 19.7% efficiency. Angew. Chem. Int. Ed. 2024, 63, e202401518.
27. Wang, W.; Liu, X.; Wang, J.; et al. Versatile self-assembled molecule enables high‐efficiency wide‐bandgap perovskite solar cells and organic solar cells. Adv. Energy. Mater. 2023, 13, 2300694.
28. Sun, X.; Zhang, C.; Yao, Y.; et al. 19.35% efficient binary bulk-heterojunction organic photovoltaic enabled by optimizing bromine-substituted self-assembled carbazole based molecules. Adv. Funct. Mater. 2024, 34, 2406060.
29. Fei, C.; Kuvayskaya, A.; Huskie, T.; et al. Phosphonic acid group positions dependent face-on and edge-on configurations in carbazole-based SAMs and impacts on perovskite solar cell performance. ACS. Energy. Lett. 2025, 10, 5192-8.
30. Kong, Y.; Wang, W.; Guo, X.; et al. Decoding the role of molecular orientation in conjugated self-assembled monolayers for high-performance binary organic photovoltaics approaching 20% efficiency. Adv. Mater. 2025, 37, e2501117.
31. Lenaers, S.; Lammar, S.; Krishna, A.; et al. Pyrene‐based self-assembled monolayer with improved surface coverage and energy level alignment for perovskite solar cells. Adv. Funct. Mater. 2024, 36, 2411922.
32. Sun, X.; Wang, F.; Yang, G.; et al. From 20% single-junction organic photovoltaics to 26% perovskite/organic tandem solar cells: self-assembled hole transport molecules matter. Energy. Environ. Sci. 2025, 18, 2536-45.
33. Tan, Q.; Wang, H.; Tang, S.; et al. Asymmetric dimethyl‐indenocarbazole phosphonic acid molecules with expanded π‐conjugation for inverted perovskite solar cells. Adv. Funct. Mater. 2025, 35, 2501147.
34. Bin, H.; Datta, K.; Wang, J.; et al. Finetuning hole-extracting monolayers for efficient organic solar cells. ACS. Appl. Mater. Interfaces. 2022, 14, 16497-504.
35. Duan, W.; Chen, K.; Pi, B.; et al. A spatial structure regulation strategy modulated the solubility and compactness of novel face-on oriented bisphosphonate-anchored SAMs for efficient inverted perovskite solar cells. Energy. Environ. Sci. 2025, 18, 7231-44.
36. Shafe, A. A.; Raza, S.; Henry, R.; Liu, J.; O’connor, B. T. Improving adhesion in organic photovoltaic cells with self-assembled monolayers. ACS. Energy. Lett. 2025, 10, 1865-73.
37. Zhang, N.; Jiang, W.; An, Y.; et al. Enhancing UV stability and charge extraction in organic solar cells with phenyl-linked aromatic self-assembled monolayer. Adv. Funct. Mater. 2025, 35, 2423178.
38. Jiang, H.; Liang, Q.; Guo, H.; et al. All roads lead to rome: isomers with divergent cathode modification mechanisms toward ohmic contact. J. Am. Chem. Soc. 2024, 146, 30262-71.
39. Lange, I.; Reiter, S.; Pätzel, M.; et al. Tuning the work function of polar zinc oxide surfaces using modified phosphonic acid self-assembled monolayers. Adv. Funct. Mater. 2014, 24, 7014-24.
40. Singh, N.; Mohapatra, A.; Chu, C.; Tao, Y. Modulation of work function of ITO by self-assembled monolayer and its effect on device characteristics of inverted perovskite solar cells. Org. Electron. 2021, 98, 106297.
41. Liu, H.; Gao, X.; Xin, Y.; et al. Central fluorination strategy of biphosphonic acid molecule for self-assembled monolayer enables efficient organic solar cells. Sci. China. Mater. 2025, 68, 1408-14.
42. Wu, J.; Li, G.; Fang, J.; et al. Random terpolymer based on thiophene-thiazolothiazole unit enabling efficient non-fullerene organic solar cells. Nat. Commun. 2020, 11, 4612.
43. Wu, J.; Sun, F.; Hua, F.; et al. Balance processing and molecular packing via structural disordering in a random terpolymer for over 19% efficiency non-halogenated solvent organic solar cells. Adv. Energy. Mater. 2025, 15, 2500024.
