REFERENCES
1. Kim, H. S.; Lee, C. R.; Im, J. H.; et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2012, 2, 591.
2. National Laboratory of the Rockies. Best research-cell efficiency chart. https://www.nlr.gov/pv/cell-efficiency (accessed 2026-09-15).
3. Wu, J.; Yu, S.; Luo, Z.; et al. Approaching 26% efficiency in inverted FAPbI3 perovskite solar cells enabled by tailored fluoropyridine derivative additives. Adv. Funct. Mater. 2026, 36, e26679.
4. Zheng, Z.; Wang, S.; Hu, Y.; Rong, Y.; Mei, A.; Han, H. Development of formamidinium lead iodide-based perovskite solar cells: efficiency and stability. Chem. Sci. 2022, 13, 2167-83.
5. Baltakesmez, A. FAPbI3 perovskite thin film having α/δ phase junction and its light harvesting performance in solar cell. J. Mater. Sci. Mater. Electron. 2020, 31, 17773-83.
6. Kim, H.; Park, N. Soft lattice and phase stability of α-FAPbI3. Adv. Energy. Mater. 2025, 15, 2400089.
7. Kim, H. S.; Lee, J. W.; Hagfeldt, A.; Grätzel, M.; Park, N. G. Molecular-level understandings and device strategies for FAPbI3-based perovskite solar cells. Chem. Soc. Rev. 2025, 54, 11061-88.
8. Zheng, X.; Wu, C.; Jha, S. K.; Li, Z.; Zhu, K.; Priya, S. Improved phase stability of formamidinium lead triiodide perovskite by strain relaxation. ACS. Energy. Lett. 2016, 1, 1014-20.
9. Chen, S.; Solanki, A.; Pan, J.; Sum, T. C. Compositional and morphological changes in water-induced early-stage degradation in lead halide perovskites. Coatings 2019, 9, 535.
10. Yun, J. S.; Kim, J.; Young, T.; et al. Humidity-induced degradation via grain boundaries of HC(NH2)2PbI3 planar perovskite solar cells. Adv. Funct. Mater. 2018, 28, 1705363.
11. Hidalgo, J.; Kaiser, W.; An, Y.; et al. Synergistic role of water and oxygen leads to degradation in formamidinium-based halide perovskites. J. Am. Chem. Soc. 2023, 145, 24549-57.
12. Lee, S.; Lee, D.; Choi, S.; et al. Accelerated degradation of FAPbI3 perovskite by excess charge carriers and humidity. Solar. RRL. 2024, 8, 2300958.
13. Khan, D.; Muhammad, I.; Qu, G.; et al. Unraveling the reasons behind SnO2/perovskite defects and their cure through multifunctional Ti3C2TX. Adv. Funct. Mater. 2024, 34, 2316169.
14. Li, N.; Pratap, S.; Körstgens, V.; et al. Mapping structure heterogeneities and visualizing moisture degradation of perovskite films with nano-focus WAXS. Nat. Commun. 2022, 13, 6701.
15. Park, S. Y.; Zhu, K. Advances in SnO2 for efficient and stable n-i-p perovskite solar cells. Adv. Mater. 2022, 34, e2110438.
16. Chen, P.; Chen, X.; Du, Y.; et al. Flexible alicyclic ammonium induced bifacial defect passivation for efficient and operationally stable perovskite solar cells. Small 2025, 21, e06782.
17. Santarossa, G.; Hahn, K.; Baiker, A. Free energy and electronic properties of water adsorption on the SnO2(110) surface. Langmuir 2013, 29, 5487-99.
18. Zhang, J.; Xie, C.; Li, G.; et al. Effect of cation replacement on the phase stability of formamidinium lead iodide perovskite. J. Chem. Phys. 2019, 151, 134104.
19. Lee, J. H.; Lee, S.; Kim, T.; et al. Interfacial α-FAPbI3 phase stabilization by reducing oxygen vacancies in SnO2-x. Joule 2023, 7, 380-97.
20. Liang, Y.; Li, F.; Cui, X.; et al. Toward stabilization of formamidinium lead iodide perovskites by defect control and composition engineering. Nat. Commun. 2024, 15, 1707.
21. An, Y.; Hidalgo, J.; Perini, C. A. R.; et al. Structural stability of formamidinium- and cesium-based halide perovskites. ACS. Energy. Lett. 2021, 6, 1942-69.
22. Lee, J.; Kim, D.; Kim, H.; Seo, S.; Cho, S. M.; Park, N. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell. Adv. Energy. Mater. 2015, 5, 1501310.
23. Chen, T.; Xie, J.; Wen, B.; et al. Inhibition of defect-induced α-to-δ phase transition for efficient and stable formamidinium perovskite solar cells. Nat. Commun. 2023, 14, 6125.
24. Liu, X.; Zhang, Y.; Shi, L.; et al. Exploring inorganic binary alkaline halide to passivate defects in low-temperature-processed planar-structure hybrid perovskite solar cells. Adv. Energy. Mater. 2018, 8, 1800138.
25. Ji, X.; Bi, L.; Fu, Q.; et al. Target therapy for buried interface enables stable perovskite solar cells with 25.05% efficiency. Adv. Mater. 2023, 35, e2303665.
26. Jung, E. H.; Chen, B.; Bertens, K.; et al. Bifunctional surface engineering on SnO2 reduces energy loss in perovskite solar cells. ACS. Energy. Lett. 2020, 5, 2796-801.
27. Zhu, P.; Gu, S.; Luo, X.; et al. Simultaneous contact and grain-boundary passivation in planar perovskite solar cells using SnO2‐KCl composite electron transport layer. Adv. Energy. Mater. 2020, 10, 1903083.
28. Adam, I. M.; Soe, K. T.; Ruengsrisang, W.; et al. SnO2/perovskite interface engineering with mixed-halide potassium salts: a pathway to efficient and stable perovskite solar cells through a combined experimental-density functional theory approach. ACS. Appl. Mater. Interfaces. 2025, 17, 31000-12.
29. Tang, X.; Chen, M.; Jiang, L.; Li, M.; Tang, G.; Liu, H. Improvements in efficiency and stability of perovskite solar cells using a cesium chloride additive. ACS. Appl. Mater. Interfaces. 2022, 14, 26866-72.
30. Yang, I. S.; Park, N. Dual additive for simultaneous improvement of photovoltaic performance and stability of perovskite solar cell. Adv. Funct. Mater. 2021, 31, 2100396.
31. Škorjanc, V.; Miaskiewicz, A.; Roß, M.; et al. Seed layers for wide-band gap coevaporated perovskite solar cells: CsCl regulates band gap and reduces process variability. ACS. Energy. Lett. 2024, 9, 5639-46.
32. Li, W.; Li, J.; Niu, G.; Wang, L. Effect of cesium chloride modification on the film morphology and UV-induced stability of planar perovskite solar cells. J. Mater. Chem. A. 2016, 4, 11688-95.
33. Lee, D. K.; Fykouras, K.; Kodalle, T.; et al. Strain engineering: reduction of microstrain at the perovskite surface via alkali metal chloride treatment enhances stability. ACS. Energy. Lett. 2025, 10, 1039-49.
34. Jo, N.; Hong, Y.; Yang, S.; Kim, H. Effect of UV-ozone treatment for KCl interlayer in perovskite solar cells. Bulletin. Korean. Chem. Soc. 2024, 45, 570-5.
35. Chen, B.; Rudd, P. N.; Yang, S.; Yuan, Y.; Huang, J. Imperfections and their passivation in halide perovskite solar cells. Chem. Soc. Rev. 2019, 48, 3842-67.
36. Saidaminov, M. I.; Kim, J.; Jain, A.; et al. Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air. Nat. Energy. 2018, 3, 648-54.
37. Choi, H. S.; Kim, Y. N.; Hong, S.; et al. Oriented crystal growth during perovskite surface reconstruction. ACS. Appl. Mater. Interfaces. 2022, 14, 51149-56.
38. Cho, C.; Feldmann, S.; Yeom, K. M.; et al. Efficient vertical charge transport in polycrystalline halide perovskites revealed by four-dimensional tracking of charge carriers. Nat. Mater. 2022, 21, 1388-95.
39. Liu, S.; Peng, H.; Yang, Y.; et al. KCl induces a “slow-release effect” on PbI2 to strengthen the crystallization of perovskite and the reverse-bias stability of carbon-electrode-based solar cells. J. Mater. Chem. C. 2025, 13, 16159-71.
40. Hou, M.; Wang, Y.; Han, M.; et al. Potassium chloride templated α-FAPbI3 perovskite crystal growth for efficient planar perovskite solar cells. Organic. Electronics. 2022, 106, 106527.
41. Rehman, W.; Mcmeekin, D. P.; Patel, J. B.; et al. Photovoltaic mixed-cation lead mixed-halide perovskites: links between crystallinity, photo-stability and electronic properties. Energy. Environ. Sci. 2017, 10, 361-9.
42. Gao, L.; Zhang, F.; Chen, X.; et al. Enhanced charge transport by incorporating formamidinium and cesium cations into two-dimensional perovskite solar cells. Angew. Chem. Int. Ed. 2019, 58, 11737-41.
43. Yang, B.; Bogachuk, D.; Suo, J.; et al. Strain effects on halide perovskite solar cells. Chem. Soc. Rev. 2022, 51, 7509-30.
44. Gallant, B. M.; Holzhey, P.; Smith, J. A.; et al. A green solvent enables precursor phase engineering of stable formamidinium lead triiodide perovskite solar cells. Nat. Commun. 2024, 15, 10110.
45. Khenkin, M. V.; Katz, E. A.; Abate, A.; et al. Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures. Nat. Energy. 2020, 5, 35-49.
46. Jasti, N. P.; Shter, G. E.; Feldman, Y.; et al. The saga of water and halide perovskites: evidence of water in methylammonium lead Tri-iodide. Adv. Funct. Mater. 2022, 32, 2204283.
47. Ouyang, Y.; Shi, L.; Li, Q.; Wang, J. Role of water and defects in photo-oxidative degradation of methylammonium lead iodide perovskite. Small. Methods. 2019, 3, 1900154.
48. Zhang, M.; Zhao, T.; Fang, S.; Chen, G. Enhancement of the ultraviolet stability of perovskite solar by the interface modified with cesium chloride. Adv. Photon. Res. 2026, 7, e202500156.
49. Yang, L.; Xie, J.; Su, Z.; et al. CsCl seed layer engineering for buried-interface modification enabling >20% efficiency in single-source vapor-deposited perovskite solar cells. J. Mater. Chem. A. 2026, 14, 13462-70.
50. Liu, Y.; He, L.; Chen, X.; Zhang, C.; Cheng, J.; Li, J. Comparative study of cesium halide (CsX, X = I, Cl, Br) modifications on defect passivation in tin-based perovskite solar cells. J. Appl. Phys. 2024, 136, 023107.
51. Li, Z.; Yang, M.; Park, J.; Wei, S.; Berry, J. J.; Zhu, K. Stabilizing perovskite structures by tuning tolerance factor: formation of formamidinium and cesium lead iodide solid-state alloys. Chem. Mater. 2016, 28, 284-92.
52. Yi, C.; Luo, J.; Meloni, S.; et al. Entropic stabilization of mixed A-cation ABX3 metal halide perovskites for high performance perovskite solar cells. Energy. Environ. Sci. 2016, 9, 656-62.
53. Svane, K. L.; Forse, A. C.; Grey, C. P.; et al. How strong is the hydrogen bond in hybrid perovskites? J. Phys. Chem. Lett. 2017, 8, 6154-9.
54. Arjun Suresh, P.; Parvathy, B.; John, G. S.; Johnson, A. M.; Sajeev, U.; Arun Kumar, K. Temperature dependence study of FAPbI3 thin films annealed under controlled humidity and light conditions. Results. Surf. Interfaces. 2025, 21, 100682.
55. Kim, J.; Jo, W. Engineering of buried interfaces in perovskites: advancing sustainable photovoltaics. Nano. Converg. 2024, 11, 57.
56. Huang, L.; Wang, K.; Jin, R.; et al. Reshaped buried interface by comprehensive passivation for highly efficient perovskite photovoltaics. Chem. Eng. J. 2024, 488, 150815.
57. Salim, K. M. M.; Masi, S.; Gualdrón-Reyes, A. F.; et al. Boosting long-term stability of pure formamidinium perovskite solar cells by ambient air additive assisted fabrication. ACS. Energy. Lett. 2021, 6, 3511-21.
58. Rakheja, B.; Hultqvist, A.; Varma, R. M.; et al. Interfacial chemistry between formamidinium lead trihalide perovskites and atomic-layer-deposited tin oxide. ACS. Appl. Energy. Mater. 2025, 8, 8467-78.
59. Tumen-Ulzii, G.; Qin, C.; Klotz, D.; et al. Detrimental effect of unreacted PbI2 on the long-term stability of perovskite solar cells. Adv. Mater. 2020, 32, e1905035.
60. Luo, S.; Cao, S.; Zheng, T.; et al. Melamine holding PbI2 with three “arms”: an effective chelation strategy to control the lead iodide to perovskite conversion for inverted perovskite solar cells. Energy. Environ. Sci. 2025, 18, 2436-51.
61. Zhang, H.; Mao, Z.; Ma, Y.; et al. Deciphering thermal degradation pathways of metal halide perovskite thin films under ambient conditions. J. Colloid. Interface. Sci. 2025, 700, 138341.
62. Wu, W. Q.; Rudd, P. N.; Ni, Z.; et al. Reducing surface halide deficiency for efficient and stable iodide-based perovskite solar cells. J. Am. Chem. Soc. 2020, 142, 3989-96.
63. Joo Yang, S.; Jin, H.; Cha, J.; et al. Elucidating degradation mechanisms of mixed cation formamidinium-based perovskite solar cells under device operation conditions. Appl. Surf. Sci. 2023, 612, 155805.
64. Huang, P. C.; Yang, T. J.; Lin, C. J.; Wang, M. Y.; Lin, W. C. Unraveling the heat- and UV-induced degradation of mixed halide perovskite thin films via surface analysis techniques. Langmuir 2024, 40, 11873-87.
65. Ho, K.; Wei, M.; Sargent, E. H.; Walker, G. C. Grain transformation and degradation mechanism of formamidinium and cesium lead iodide perovskite under humidity and light. ACS. Energy. Lett. 2021, 6, 934-40.
66. Bu, T.; Ono, L. K.; Li, J.; et al. Modulating crystal growth of formamidinium-caesium perovskites for over 200 cm2 photovoltaic sub-modules. Nat. Energy. 2022, 7, 528-36.
67. Zhang, Y.; Yang, T.; Lee, S.; Liu, S.; Zhao, K.; Park, N. Stabilizing α-phase FAPbI3 perovskite induced by an ordered solvated quasi-crystalline PbI2. ACS. Energy. Lett. 2024, 9, 159-67.
68. Kwoka, M.; Ottaviano, L.; Passacantando, M.; Santucci, S.; Czempik, G.; Szuber, J. XPS study of the surface chemistry of L-CVD SnO2 thin films after oxidation. Thin. Solid. Films. 2005, 490, 36-42.
69. Batzill, M.; Diebold, U. The surface and materials science of tin oxide. Prog. Surf. Sci. 2005, 79, 47-154.
70. Huang, W.; Manser, J. S.; Kamat, P. V.; Ptasinska, S. Evolution of chemical composition, morphology, and photovoltaic efficiency of CH3NH3PbI3 perovskite under ambient conditions. Chem. Mater. 2016, 28, 303-11.
71. Wang, C.; Amornkitbamrung, U.; Xu, Y.; et al. Buried interface engineering in metal-halide perovskite/NiO heterostructures through direct observation of interfacial reactions. ACS. Energy. Lett. 2026, 11, 4580-9.
72. Hartmann, C.; Sadoughi, G.; Félix, R.; et al. Spatially resolved insight into the chemical and electronic structure of solution-processed perovskites-why to (Not) worry about pinholes. Adv. Mater. Inter. 2018, 5, 1701420.
73. Holland, M.; Ruth, A.; Mielczarek, K.; Dhas, V. V.; Berry, J. J.; Irwin, M. D. Metal halide perovskites demonstrate radiation hardness and defect healing in vacuum. ACS. Appl. Mater. Interfaces. 2022, 14, 9352-62.
74. Yang, C.; Chen, C.; Bian, T.; et al. Anisotropic δ-to-α phase transition in formamidinium lead iodide thin films. ACS. Nano. 2025, 19, 9225-31.
75. Fu, F.; Pisoni, S.; Jeangros, Q.; et al. I2 vapor-induced degradation of formamidinium lead iodide based perovskite solar cells under heat-light soaking conditions. Energy. Environ. Sci. 2019, 12, 3074-88.
76. Hultqvist, A.; Jacobsson, T. J.; Svanström, S.; et al. SnOx atomic layer deposition on bare perovskite-an investigation of initial growth dynamics, interface chemistry, and solar cell performance. ACS. Appl. Energy. Mater. 2021, 4, 510-22.
77. Le, D.; Wei, T. In-depth investigation of methylamine gas post-treatment for MAPbI3 films and its potential for upscaling perovskite solar cells. EES. Sol. 2026, 2, 183-97.
78. Rocks, C.; Svrcek, V.; Maguire, P.; Mariotti, D. Understanding surface chemistry during MAPbI3 spray deposition and its effect on photovoltaic performance. J. Mater. Chem. C. 2017, 5, 902-16.
79. Bilal, M.; Hameed, M.; Igbari, F.; et al. Insights into degradation pathways of perovskite thin films under outdoor and indoor conditions: a comparative analysis. Adv. Opt. Mater. 2026, 14, e03613.
80. Harvey, S. P.; Zhang, F.; Palmstrom, A.; Luther, J. M.; Zhu, K.; Berry, J. J. Mitigating measurement artifacts in TOF-SIMS analysis of perovskite solar cells. ACS. Appl. Mater. Interfaces. 2019, 11, 30911-8.
81. Sander, P.; Kaiser, U.; Jede, R.; Lipinsky, D.; Ganschow, O.; Benninghoven, A. Secondary ion and sputtered neutral formation from oxygen loaded Si(100). J. Vac. Sci. Technol. A. 1985, 3, 1946-54.
82. Reuter, W.; Wittmaack, K. An AES-SIMS study of silicon oxidation induced by ion or electron bombardment. Appl. Surf. Sci. 1980, 5, 221-42.
83. Minns, J. L.; Zajdel, P.; Chernyshov, D.; van Beek, W.; Green, M. A. Structure and interstitial iodide migration in hybrid perovskite methylammonium lead iodide. Nat. Commun. 2017, 8, 15152.
84. Aristidou, N.; Eames, C.; Sanchez-Molina, I.; et al. Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells. Nat. Commun. 2017, 8, 15218.
