REFERENCES
1. Fan, Y.; Qin, Z.; Lu, L.; et al. An efficient and precise solution-vacuum hybrid batch fabrication of 2D/3D perovskite submodules. Nat. Commun. 2025, 16, 7019.
2. Li, Q.; Liu, H.; Hou, C.; et al. Harmonizing the bilateral bond strength of the interfacial molecule in perovskite solar cells. Nat. Energy. 2024, 9, 1506-16.
3. Xu, H.; Xiao, Y.; Elmestekawy, K. A.; et al. Metastable interphase induced pre-strain compensation enables efficient and stable perovskite solar cells. Energy. Environ. Sci. 2025, 18, 246-55.
4. Xu, R.; Wang, C.; Zhang, Z.; et al. Buried interface engineering: a key to unlocking the potential of self-assembled monolayer (SAM)-based inverted perovskite solar cells. Small 2025, 21, e2503114.
5. Bi, H.; Zuo, X.; Liu, B.; et al. Multifunctional organic ammonium salt-modified SnO2 nanoparticles toward efficient and stable planar perovskite solar cells. J. Mater. Chem. A. 2021, 9, 3940-51.
6. Wei, K.; Yang, L.; Deng, J.; Luo, Z.; Zhang, X.; Zhang, J. Facile exfoliation of the perovskite thin film for visualizing the buried interfaces in perovskite solar cells. ACS. Appl. Energy. Mater. 2022, 5, 7458-65.
7. Wang, L.; Xia, J.; Yan, Z.; et al. Robust interfacial modifier for efficient perovskite solar cells: reconstruction of energy alignment at buried interface by self-diffusion of dopants. Adv. Funct. Mater. 2022, 32, 2204725.
8. Wu, M.; Duan, Y.; Yang, L.; et al. Multifunctional small molecule as buried interface passivator for efficient planar perovskite solar cells. Adv. Funct. Mater. 2023, 33, 2300128.
9. Deng, C.; Wu, J.; Yang, Y.; et al. Modulating residual lead iodide via functionalized buried interface for efficient and stable perovskite solar cells. ACS. Energy. Lett. 2022, 8, 666-76.
10. Ge, Y.; Ye, F.; Xiao, M.; et al. Internal encapsulation for lead halide perovskite films for efficient and very stable solar cells. Adv. Energy. Mater. 2022, 12, 2200361.
11. Xiong, Q.; Wang, C.; Zhou, Q.; et al. Rear interface engineering to suppress migration of iodide ions for efficient perovskite solar cells with minimized hysteresis. Adv. Funct. Mater. 2021, 32, 2107823.
12. Li, H.; Xie, G.; Wang, X.; et al. Buried interface dielectric layer engineering for highly efficient and stable inverted perovskite solar cells and modules. Adv. Sci. 2023, 10, e2300586.
13. Chen, Y.; Zuo, X.; He, Y.; et al. Dual passivation of perovskite and SnO2 for high-efficiency MAPbI3 perovskite solar cells. Adv. Sci. 2021, 8, 2001466.
14. Xia, H.; Li, X.; Zhou, J.; et al. Interfacial chemical bridge constructed by zwitterionic sulfamic acid for efficient and stable perovskite solar cells. ACS. Appl. Energy. Mater. 2020, 3, 3186-92.
15. Kim, G.; Choi, Y.; Choi, H.; Min, J.; Park, T.; Song, S. Novel cathode interfacial layer using creatine for enhancing the photovoltaic properties of perovskite solar cells. J. Mater. Chem. A. 2020, 8, 21721-8.
16. Qin, Z.; Chen, Y.; Wang, X.; et al. Zwitterion-functionalized SnO2 substrate induced sequential deposition of black-phase FAPbI3 with rearranged PbI2 residue. Adv. Mater. 2022, 34, e2203143.
17. Geng, Q.; Jia, X.; He, Z.; et al. Interface engineering via amino acid for efficient and stable perovskite solar cells. Adv. Mater. Interfaces. 2022, 9, 2201641.
18. Liu, S.; Li, J.; Xiao, W.; et al. Buried interface molecular hybrid for inverted perovskite solar cells. Nature 2024, 632, 536-42.
19. Jiang, X.; Qin, S.; Meng, L.; et al. Isomeric diammonium passivation for perovskite-organic tandem solar cells. Nature 2024, 635, 860-6.
20. Peng, W.; Zhang, Y.; Zhou, X.; et al. A versatile energy-level-tunable hole-transport layer for multi-composition inverted perovskite solar cells. Energy. Environ. Sci. 2025, 18, 874-83.
21. Wei, Z.; Zhou, Q.; Niu, X.; et al. Surpassing 90% Shockley-Queisser VOC limit in 1.79 eV wide-bandgap perovskite solar cells using bromine-substituted self-assembled monolayers. Energy. Environ. Sci. 2025, 18, 1847-55.
22. Gao, L.; He, Z.; Zeng, K.; Liu, A.; Jiang, F.; Ma, T. Ultralow-temperature SnO2 electron transport layers fabricated by intermediate-controlled chemical bath deposition for highly efficient perovskite solar cells. ChemSusChem 2023, 16, e202300765.
23. Chen, Z.; Jiang, S.; Du, X.; et al. Three-dimensional (3D) fluoride molecular glue to improve the SnO2/perovskite interface for efficient perovskite solar cells. Angew. Chem. Int. Ed. Engl. 2025, 64, e202415669.
24. Wang, Y.; Ye, J.; Song, J.; et al. Synchronous modulation of hole-selective self-assembled monolayer and buried interface for inverted perovskite solar cells. Cell. Rep. Phys. Sci. 2024, 5, 101992.
25. Shi, C.; Wang, J.; Lei, X.; et al. Modulating competitive adsorption of hybrid self-assembled molecules for efficient wide-bandgap perovskite solar cells and tandems. Nat. Commun. 2025, 16, 3029.
26. Zhou, H.; Wang, W.; Duan, Y.; et al. Glycol monomethyl ether-substituted carbazolyl hole-transporting material for stable inverted perovskite solar cells with efficiency of 25.52%. Angew. Chem. Int. Ed. Engl. 2024, 63, e202403068.
27. Torres Merino, L. V.; Petoukhoff, C. E.; Matiash, O.; et al. Impact of the valence band energy alignment at the hole-collecting interface on the photostability of wide band-gap perovskite solar cells. Joule 2024, 8, 2585-606.
28. Wang, R.; Wu, C.; Qi, J.; et al. Side-chain methylthio-based position isomerism of hole-transport materials for perovskite solar cells: from theoretical simulation to experimental characterization. Adv. Funct. Mater. 2023, 33, 2213843.
29. Farag, A.; Feeney, T.; Hossain, I. M.; et al. Evaporated self-assembled monolayer hole transport layers: lossless interfaces in p-i-n perovskite solar cells. Adv. Energy. Mater. 2023, 13, 2203982.
30. Wei, Y.; Tang, Y.; Li, H.; et al. Decreased hysteresis benefited from enhanced lattice oxygen and promoted band alignment with electron transport layer modification in perovskite solar cells. ACS. Appl. Mater. Interfaces. 2025, 17, 11278-86.
31. Chen, Q.; Yang, X.; Zhou, Y.; Song, B. Zwitterions: promising interfacial/doping materials for organic/perovskite solar cells. New. J. Chem. 2021, 45, 15118-30.
32. Liu, J.; Li, S.; Liu, S.; et al. Oxygen vacancy management for high-temperature mesoporous SnO2 electron transport layers in printable perovskite solar cells. Angew. Chem. Int. Ed. Engl. 2022, 61, e202202012.
33. Mallik, N.; Hajhemati, J.; Frégnaux, M.; et al. Interface defect formation for atomic layer deposition of SnO2 on metal halide perovskites. Nano. Energy. 2024, 126, 109582.
34. Fu, S.; Sun, N.; Chen, H.; et al. On-demand formation of Lewis bases for efficient and stable perovskite solar cells. Nat. Nanotechnol. 2025, 20, 772-8.
35. Zhou, Q.; He, D.; Zhuang, Q.; et al. Revealing steric-hindrance-dependent buried interface defect passivation mechanism in efficient and stable perovskite solar cells with mitigated tensile stress. Adv. Funct. Mater. 2022, 32, 2205507.
36. Kong, W.; Zhu, D.; Zhang, Y.; et al. Electron donor coordinated metal-organic framework to enhance photoelectrochemical performance. Angew. Chem. Int. Ed. Engl. 2023, 62, e202308514.
37. Wang, K.; Hong, Q.; Zhu, C.; et al. Metal-ligand dual-site single-atom nanozyme mimicking urate oxidase with high substrates specificity. Nat. Commun. 2024, 15, 5705.
38. Ma, L.; Yao, H.; Wang, J.; et al. Impact of electrostatic interaction on bulk morphology in efficient donor-acceptor photovoltaic blends. Angew. Chem. Int. Ed. Engl. 2021, 60, 15988-94.
39. Zhang, L.; Cao, K.; Qian, J.; et al. Crystallization control and multisite passivation of perovskites with amino acid to boost the efficiency and stability of perovskite solar cells. J. Mater. Chem. C. 2020, 8, 17482-90.
40. Du, J.; Feng, L.; Guo, X.; et al. Enhanced efficiency and stability of planar perovskite solar cells by introducing amino acid to SnO2/perovskite interface. J. Power. Sources. 2020, 455, 227974.
41. Li, Y.; Zhao, C.; Wang, L.; et al. Self-assembled manganese acetate@tin dioxide colloidal quantum dots as an electron-transport layer for efficient and stable perovskite solar cells. Inorg. Chem. Front. 2024, 11, 3566-77.
42. Liu, B.; Zhou, Q.; Li, Y.; et al. Polydentate ligand reinforced chelating to stabilize buried interface toward high-performance perovskite solar cells. Angew. Chem. Int. Ed. Engl. 2024, 63, e202317185.
43. Li, T.; Wang, S.; Yang, J.; et al. Multiple functional groups synergistically improve the performance of inverted planar perovskite solar cells. Nano. Energy. 2021, 82, 105742.
44. Canil, L.; Cramer, T.; Fraboni, B.; et al. Tuning halide perovskite energy levels. Energy. Environ. Sci. 2021, 14, 1429-38.
45. Li, Z.; Wang, C.; Sun, P.; et al. In-situ peptization of WO3 in alkaline SnO2 colloid for stable perovskite solar cells with record fill-factor approaching the shockley-queisser limit. Nano. Energy. 2022, 100, 107468.
46. Yu, X.; Lv, Y.; Xue, B.; et al. Multiple bonding effects of 1-methanesulfonyl-piperazine on the two-step processed perovskite towards efficient and stable solar cells. Nano. Energy. 2022, 93, 106856.
47. Su, P.; Bi, H.; Ran, D.; et al. Multifunctional and multi-site interfacial buffer layer for efficient and stable perovskite solar cells. Chem. Eng. J. 2023, 472, 145077.
48. Su, H.; Xu, Z.; He, X.; et al. Surface energy engineering of buried interface for highly stable perovskite solar cells with efficiency over 25. Adv. Mater. 2024, 36, e2306724.
49. Xu, X.; Sun, Y.; He, D.; et al. Grain size control for high-performance formamidinium-based perovskite solar cells via suppressing heterogenous nucleation. J. Mater. Chem. C. 2021, 9, 208-13.
50. Jiang, X.; Zhang, B.; Yang, G.; et al. Molecular dipole engineering of carbonyl additives for efficient and stable perovskite solar cells. Angew. Chem. Int. Ed. Engl. 2023, 62, e202302462.
51. Du, Y.; Tian, Q.; Chang, X.; et al. Ionic liquid treatment for highest-efficiency ambient printed stable all-inorganic CsPbI3 perovskite solar cells. Adv. Mater. 2022, 34, e2106750.
52. Aranda, C. A.; Alvarez, A. O.; Chivrony, V. S.; Das, C.; Rai, M.; Saliba, M. Overcoming ionic migration in perovskite solar cells through alkali metals. Joule 2024, 8, 241-54.
53. Li, F.; Deng, X.; Shi, Z.; et al. Hydrogen-bond-bridged intermediate for perovskite solar cells with enhanced efficiency and stability. Nat. Photonics. 2023, 17, 478-84.
54. Ceratti, D. R.; Zohar, A.; Kozlov, R.; et al. Eppur si muove: proton diffusion in halide perovskite single crystals. Adv. Mater. 2020, 32, e2002467.
55. Zhang, Y.; Kong, T.; Xie, H.; et al. Molecularly tailored SnO2/perovskite interface enabling efficient and stable FAPbI3 solar cells. ACS. Energy. Lett. 2022, 7, 929-38.
56. Sun, Y.; Zhang, J.; Yu, H.; Wang, J.; Huang, C.; Huang, J. Mechanism of bifunctional p-amino benzenesulfonic acid modified interface in perovskite solar cells. Chem. Eng. J. 2021, 420, 129579.
57. Lei, Y.; Li, Z.; Wang, H.; et al. Manipulate energy transport via fluorinated spacers towards record-efficiency 2D Dion-Jacobson CsPbI3 solar cells. Sci. Bull. 2022, 67, 1352-61.
58. Zhan, S.; Duan, Y.; Liu, Z.; et al. Stable 24.29%-efficiency FA0.85MA0.15PbI3 perovskite solar cells enabled by methyl haloacetate-lead dimer complex. Adv. Energy. Mater. 2022, 12, 2200867.
59. Liu, Z.; Cao, F.; Wang, M.; Wang, M.; Li, L. Observing defect passivation of the grain boundary with 2-aminoterephthalic acid for efficient and stable perovskite solar cells. Angew. Chem. Int. Ed. Engl. 2020, 59, 4161-7.
60. Yang, M.; Tan, Y.; Yang, G.; et al. Chemical synergic stabilization of high Br-content mixed-halidewide-bandgap perovskites for durable multi-terminal tandemsolar cells with minimized Pb leakage. Angew. Chem. Int. Ed. 2025, 64, e202415966.
61. Liu, G.; Jiang, X.; Feng, W.; et al. Synergic electron and defect compensation minimizes voltage loss in lead-free perovskite solar cells. Angew. Chem. Int. Ed. Engl. 2023, 62, e202305551.
