REFERENCES

1. Liu, S.; Li, J.; Xiao, W.; et al. Buried interface molecular hybrid for inverted perovskite solar cells. Nature 2024, 632, 536-42.

2. Liang, Z.; Zhang, Y.; Xu, H.; et al. Homogenizing out-of-plane cation composition in perovskite solar cells. Nature 2023, 624, 557-63.

3. Jang, W. J.; Kim, E. H.; Cho, J. H.; Lee, D.; Kim, S. Y. Elucidating the role of alkali metal carbonates in impact on oxygen vacancies for efficient and stable perovskite solar cells. Adv. Sci. 2024, 11, e2406657.

4. Kang, S. B.; Patil, P.; Yoon, G. W.; Han, G. S.; Jung, H. S.; Kim, D. H. Study of interface engineering on perovskite-based indoor photovoltaics for powering Internet-of-Things. Chem. Eng. J. 2024, 502, 157973.

5. Kim, D.; Lee, S.; Kim, G. M.; Oh, S. Y. Physical effects of 2PACz layers as hole-transport material on the performance of perovskite solar cell. Electron. Mater. Lett. 2023, 19, 510-7.

6. Ali, S.; Javed, S.; Akram, M. A.; et al. Investigating the electrical and optical properties of nickle and strontium co-doped CsPbBr₃ nanocrystals: potential absorber material for perovskite solar cells. Trans. Electr. Electron. Mater. 2024, 25, 422-33.

7. Fakharuddin, A.; Gangishetty, M. K.; Abdi-jalebi, M.; et al. Perovskite light-emitting diodes. Nat. Electron. 2022, 5, 203-16.

8. Chen, W.; Huang, Z.; Yao, H.; et al. Highly bright and stable single-crystal perovskite light-emitting diodes. Nat. Photon. 2023, 17, 401-7.

9. Jiang, J.; Shi, M.; Xia, Z.; et al. Efficient pure-red perovskite light-emitting diodes with strong passivation via ultrasmall-sized molecules. Science. Advances. 2024, 10, eadn5683.

10. Shin, G.; Yun, D.; Ha, Y.; et al. Enhancing performance of perovskite nanocrystal light-emitting diodes with perfluorinated ionomer and PEDOT:PSS. Trans. Electr. Electron. Mater. 2024, 25, 40-7.

11. Shinde, P. V.; Patra, A.; Rout, C. S. A review on the sensing mechanisms and recent developments on metal halide-based perovskite gas sensors. J. Mater. Chem. C. 2022, 10, 10196-223.

12. Hou, Y.; Li, J.; Yoon, J.; et al. Retina-inspired narrowband perovskite sensor array for panchromatic imaging. Sci. Adv. 2023, 9, eade2338.

13. Park, J.; Ahn, J.; Jung, B. K.; et al. Reusable gasochromic gas sensor with enhanced selectivity for acidic gases via surface-engineered all-inorganic perovskite nanocrystals. Chem. Eng. J. 2024, 498, 155420.

14. Liu, A.; Zhu, H.; Bai, S.; et al. High-performance metal halide perovskite transistors. Nat. Electron. 2023, 6, 559-71.

15. Kim, S. J.; Im, I. H.; Baek, J. H.; et al. Linearly programmable two-dimensional halide perovskite memristor arrays for neuromorphic computing. Nat. Nanotechnol. 2025, 20, 83-92.

16. Nketia-yawson, V.; Nketia-yawson, B.; Woong, Jo. J. High-mobility electrolyte-gated perovskite transistors on flexible plastic substrate via interface and composition engineering. Appl. Surf. Sci. 2023, 623, 156984.

17. Pathak, A. K.; Mukherjee, S.; Batabyal, S. K. 2D layered (CH₃NH₃)₃Sb₂Cl_xI_9-x lead-free perovskite for weak light detection. Electron. Mater. Lett. 2024, 20, 425-31.

18. Seo, H.; Park, T.; Ali, A.; et al. Quantum dots and perovskites-based physically unclonable functions for binary and ternary keys via optical-to-electrical conversion. Adv. Funct. Mater. 2025, 35, 2507395.

19. Bhaumik, S.; Ray, S.; Batabyal, S. K. Recent advances of lead-free metal halide perovskite single crystals and nanocrystals: synthesis, crystal structure, optical properties, and their diverse applications. Mater. Today. Chem. 2020, 18, 100363.

20. Tan, Z. K.; Moghaddam, R. S.; Lai, M. L.; et al. Bright light-emitting diodes based on organometal halide perovskite. Nat. Nanotechnol. 2014, 9, 687-92.

21. Peng, C.; Yao, H.; Ali, O.; et al. Weakly space-confined all-inorganic perovskites for light-emitting diodes. Nature 2025, 643, 96-103.

22. Kim, J. S.; Heo, J. M.; Park, G. S.; et al. Ultra-bright, efficient and stable perovskite light-emitting diodes. Nature 2022, 611, 688-94.

23. Gao, Y.; Li, H.; Dai, X.; et al. Microsecond-response perovskite light-emitting diodes for active-matrix displays. Nat. Electron. 2024, 7, 487-96.

24. Yu, Y.; Wang, B. F.; Shen, Y.; et al. Efficient blue perovskite LEDs via bottom-up charge manipulation for solution-processed active-matrix displays. Adv. Mater. 2025, 37, e2503234.

25. Chen, Y.; Yang, X.; Fan, X.; et al. Electrohydrodynamic inkjet printing of three-dimensional perovskite nanocrystal arrays for full-color micro-LED displays. ACS. Appl. Mater. Interfaces. 2024, 16, 24908-19.

26. Mahyoub, S. A.; Farid, A.; Azeem, M. Z.; Fadhil, D. A. A.; Qaraah, F. A.; Drmosh, Q. A. Physical vapor deposition techniques for CO₂ electroreduction: a review. Small. Struct. 2025, 6, 2400501.

27. Umar, A.; Hahn, Y. B. Aligned hexagonal coaxial-shaped ZnO nanocolumns on steel alloy by thermal evaporation. Appl. Phys. Lett. 2006, 88, 173120.

28. Wang, H.; Li, J.; Huang, M.; et al. Single-atom alloys prepared by two-step thermal evaporation. Nano. Res. 2024, 17, 2808-13.

29. Lee, G. Branched MgO nanowires synthesized by thermal evaporation method in air at atmospheric pressure. Korean. J. Met. Mater. 2023, 61, 444-8.

30. Lee, G. Effect of oxygen concentration on the growth and cathodoluminescence properties of MgO nanowires. Korean. J. Met. Mater. 2023, 61, 509-13.

31. Kim, S. K.; Kim, K.; Park, H.; et al. Patternization of cathode metal using low surface energy organic molecules in OLED thermal evaporation process. J. Ind. Eng. Chem. 2022, 114, 213-20.

32. Jung, S. W.; Kim, K.; Park, H.; et al. Patternable semi-transparent cathode using thermal evaporation for OLED display applications. Adv. Elect. Mater. 2021, 7, 2001101.

33. Chen, W.; Zhang, J.; Xu, G.; et al. A semitransparent inorganic perovskite film for overcoming ultraviolet light instability of organic solar cells and achieving 14.03% efficiency. Adv. Mater. 2018, 30, e1800855.

34. Yeh, K. C.; Chan, C. H. High brightness and low operating voltage CsPbBr₃ perovskite LEDs by single-source vapor deposition. Sci. Rep. 2024, 14, 3351.

35. Zhang, C.; Chen, J.; Kong, L.; et al. Core/shell metal halide perovskite nanocrystals for optoelectronic applications. Adv. Funct. Mater. 2021, 31, 2100438.

36. Das Adhikari, S.; Gualdrón Reyes, A. F.; Paul, S.; et al. Impact of core-shell perovskite nanocrystals for LED applications: successes, challenges, and prospects. Chem. Sci. 2023, 14, 8984-99.

37. Park, M.; Park, J.; Lee, J.; et al. Efficient perovskite light‐emitting diodes using polycrystalline core-shell-mimicked nanograins. Adv. Funct. Mater. 2019, 29, 1902017.

38. Hou, S.; Gangishetty, M. K.; Quan, Q.; Congreve, D. N. Efficient blue and white perovskite light-emitting diodes via manganese doping. Joule 2018, 2, 2421-33.

39. Shi, Y.; Xi, J.; Lei, T.; et al. Rubidium doping for enhanced performance of highly efficient formamidinium-based perovskite light-emitting diodes. ACS. Appl. Mater. Interfaces. 2018, 10, 9849-57.

40. Yang, D.; Huo, D. Cation doping and strain engineering of CsPbBr₃-based perovskite light emitting diodes. J. Mater. Chem. C. 2020, 8, 6640-53.

41. Wang, R.; Zhao, J.; Ma, J.; et al. Yttrium cation doping and phenylphosphonic acid passivation for pure-red perovskite light-emitting diodes. ACS. Energy. Lett. 2024, 9, 4699-707.

42. Chu, Z.; Zhang, W.; Jiang, J.; et al. Blue perovskite light-emitting diodes using multifunctional small molecule dopants. Adv. Mater. 2025, 37, e2409718.

43. Zhang, L.; Sun, C.; He, T.; et al. High-performance quasi-2D perovskite light-emitting diodes: from materials to devices. Light. Sci. Appl. 2021, 10, 61.

44. Sun, C.; Jiang, Y.; Cui, M.; et al. High-performance large-area quasi-2D perovskite light-emitting diodes. Nat. Commun. 2021, 12, 2207.

45. Zhang, F.; Cai, B.; Song, J.; Han, B.; Zhang, B.; Zeng, H. Efficient blue perovskite light-emitting diodes boosted by 2D/3D energy cascade channels. Adv. Funct. Mater. 2020, 30, 2001732.

46. Jiang, N.; Wang, Z.; Zheng, Y.; et al. 2D/3D heterojunction perovskite light-emitting diodes with tunable ultrapure blue emissions. Nano. Energy. 2022, 97, 107181.

47. He, Z.; Peng, C.; Guo, R.; et al. 2D/3D perovskite heterojunctions: composition and application in light-emitting diodes. Chem. Eng. J. 2025, 505, 159894.

48. Kuang, C.; Hu, Z.; Yuan, Z.; et al. Critical role of additive-induced molecular interaction on the operational stability of perovskite light-emitting diodes. Joule 2021, 5, 618-30.

49. Liu, Y.; Ono, L. K.; Qi, Y. Organic additive engineering toward efficient perovskite light‐emitting diodes. InfoMat 2020, 2, 1095-108.

50. Liu, Z.; Qiu, W.; Peng, X.; et al. Perovskite light-emitting diodes with EQE exceeding 28% through a synergetic dual-additive strategy for defect passivation and nanostructure regulation. Adv. Mater. 2021, 33, e2103268.

51. Islam, A.; Saeed Khan, R. A.; Khalid, A.; et al. Zwitterions: an innovative class of additive materials for perovskite light-emitting diodes. Mater. Today. Energy. 2025, 47, 101752.

52. Zou, S.; Fan, K.; Liu, Z.; et al. Additive-stabilized emission centers for blue perovskite light-emitting diodes. ACS. Appl. Mater. Interfaces. 2023, 15, 26778-86.

53. Liu, M.; Johnston, M. B.; Snaith, H. J. Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature 2013, 501, 395-8.

54. Hu, Y.; Wang, Q.; Shi, Y.; et al. Vacuum-evaporated all-inorganic cesium lead bromine perovskites for high-performance light-emitting diodes. J. Mater. Chem. C. 2017, 5, 8144-9.

55. Mariano, F.; Listorti, A.; Rizzo, A.; Colella, S.; Gigli, G.; Mazzeo, M. Thermally evaporated hybrid perovskite for hetero-structured green light-emitting diodes. Appl. Phys. Lett. 2017, 111, 163301.

56. Liu, X.; Tan, X.; Liu, Z.; et al. Sequentially vacuum evaporated high-quality CsPbBr₃ films for efficient carbon-based planar heterojunction perovskite solar cells. J. Power. Sources. 2019, 443, 227269.

57. Lee, W.; Lee, J.; Lee, H. D.; et al. Controllable deposition of organic metal halide perovskite films with wafer-scale uniformity by single source flash evaporation. Sci. Rep. 2020, 10, 18781.

58. Cho, H.; Jeong, S. H.; Park, M. H.; et al. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes. Science 2015, 350, 1222-5.

59. Xie, S.; Osherov, A.; Bulović, V. All-vacuum-deposited inorganic cesium lead halide perovskite light-emitting diodes. APL. Materials. 2020, 8, 051113.

60. Lian, X.; Wang, X.; Ling, Y.; et al. Light emitting diodes based on inorganic composite halide perovskites. Adv. Funct. Mater. 2019, 29, 1807345.

61. Otalora, C.; Botero, M. A.; Mantilla, M. A.; Petit, J. F.; Ospina, R.; Gordillo, G. Hybrid perovskite films deposited by thermal evaporation from a single source. J. Mater. Sci. Mater. Electron. 2021, 32, 12151-63.

62. Kim, S. J.; Byun, J.; Jeon, T.; Jin, H. M.; Hong, H. R.; Kim, S. O. Perovskite light-emitting diodes via laser crystallization: systematic investigation on grain size effects for device performance. ACS. Appl. Mater. Interfaces. 2018, 10, 2490-5.

63. Shin, M.; Lee, H. S.; Sim, Y. C.; Cho, Y. H.; Cheol Choi, K.; Shin, B. Modulation of growth kinetics of vacuum-deposited CsPbBr₃ films for efficient light-emitting diodes. ACS. Appl. Mater. Interfaces. 2020, 12, 1944-52.

64. Rigi VJ, Jayaraj MK, Saji KJ. Effect of substrate and substrate temperature on the deposition of MoS₂ by radio frequency magnetron sputtering. J. Vac. Sci. Technol. A. 2022, 40, 032201.

65. Gil-Escrig, L.; Nespoli, J.; Elhorst, F. D.; et al. Tuning substrate temperature for enhanced vacuum-deposited wide-bandgap perovskite solar cells: insights from morphology, charge transport, and drift-diffusion simulations. EES. Solar. 2025, 1, 391-403.

66. Chen, C.; Han, T. H.; Tan, S.; et al. Efficient flexible inorganic perovskite light-emitting diodes fabricated with CsPbBr₃ emitters prepared via low-temperature in situ dynamic thermal crystallization. Nano. Lett. 2020, 20, 4673-80.

67. Han, B.; Shan, Q.; Zhang, F.; Song, J.; Zeng, H. Giant efficiency and color purity enhancement in multicolor inorganic perovskite light-emitting diodes via heating-assisted vacuum deposition. J. Semicond. 2020, 41, 052205.

68. Mu, H.; Hu, F.; Wang, R.; Jia, J.; Shuang, Xiao. Effects of in-situ annealing on the electroluminescence performance of the Sn-based perovskite light-emitting diodes prepared by thermal evaporation. J. Lumin. 2020, 226, 117493.

69. Peng, C.; He, Z.; Guo, R.; et al. The synergy of pre-frozen substrates and post-annealing for high-efficiency co-evaporated blue perovskite LEDs. Chem. Eng. J. 2024, 493, 152579.

70. Yuan, F.; Xi, J.; Dong, H.; et al. All‐inorganic hetero‐structured cesium tin halide perovskite light‐emitting diodes with current density over 900 A·cm^-2 and its amplified spontaneous emission behaviors. Phys. Rapid. Res. Lett. 2018, 12, 1800090.

71. Huang, J.; Yao, H.; You, F.; et al. Effects of post-annealing on the property of CsPbBr₃ films and the performance of relevant light-emitting diodes. J. Lumin. 2024, 275, 120771.

72. Xiang, G.; Zhou, Y.; Peng, W.; et al. Vacuum-deposited perovskite CsPbBr₃ thin-films for temperature-stable Si based pure-green all-inorganic light-emitting diodes. Ceram. Int. 2023, 49, 21624-33.

73. Bai, T.; Wang, S.; Zhang, K.; Chu, C.; Sun, Y.; Yi, L. High stability and strong luminescence CsPbBr₃-Cs₄PbBr₆ thin films for all-inorganic perovskite light-emitting diodes. RSC. Adv. 2023, 13, 24413-22.

74. Luo, J.; Yang, L.; Tan, Z.; et al. Efficient blue light emitting diodes based on europium halide perovskites. Adv. Mater. 2021, 33, e2101903.

75. Qiu, C.; Dumont, A.; Li, P.; Lu, Z. Thermally stable charge transport materials for vapor-phase fabrication of perovskite devices. Adv. Photonics. Res. 2021, 2, 2000140.

76. Peng, C.; He, Z.; Guo, R.; et al. The synergy of the buried interface surface energy and temperature for thermal evaporated perovskite light-emitting diodes. ACS. Appl. Mater. Interfaces. 2023, 15, 15768-74.

77. Li, J.; Yang, L.; Guo, Q.; et al. All-vacuum fabrication of yellow perovskite light-emitting diodes. Sci. Bull. 2022, 67, 178-85.

78. Kim, N.; Shin, M.; Jun, S.; et al. Highly efficient vacuum-evaporated CsPbBr₃ perovskite light-emitting diodes with an electrical conductivity enhanced polymer-assisted passivation layer. ACS. Appl. Mater. Interfaces. 2021, 13, 37323-30.

79. Xu, L.; Zhou, L.; Yan, M.; Luo, G.; Yang, D.; Fang, Y. High-brightness thermally evaporated perovskite light-emitting diodes via dual-interface engineering. Opt. Mater. 2024, 150, 115223.

80. Song, L.; Huang, L.; Liu, Y.; et al. Efficient thermally evaporated perovskite light-emitting devices via a bilateral interface engineering strategy. J. Phys. Chem. Lett. 2021, 12, 6165-73.

81. Lee, S.; Woo, M. Y.; Kim, C.; et al. Buried interface modulation via PEDOT:PSS ionic exchange for the Sn-Pb mixed perovskite based solar cells. Chem. Eng. J. 2024, 479, 147587.

82. Kwack, H.; Kim, M.; Cho, Y.; Kim, T.; Myoung, J.; Shim, W. Thickness controlled CsPbBr₃ nanocrystal films for high efficiency (6% EQE) perovskite LEDs. J. Korean. Ceram. Soc. 2025, 62, 1023-9.

83. Zhao, L.; Lee, K. M.; Roh, K.; Khan, S. U. Z.; Rand, B. P. Improved outcoupling efficiency and stability of perovskite light-emitting diodes using thin emitting layers. Adv. Mater. 2019, 31, e1805836.

84. Gu, Y.; Yao, X.; Long, M.; Geng, H.; Hu, M. Ultra-broadband light-emitting diodes from co-evaporated lead-free CsCu₂I₃. Mater. Lett. 2022, 323, 132607.

85. Jia, K.; Song, L.; Hu, Y.; et al. Improved performance for thermally evaporated perovskite light-emitting devices via defect passivation and carrier regulation. ACS. Appl. Mater. Interfaces. 2020, 12, 15928-33.

86. Li, J.; Du, P.; Li, S.; et al. High-throughput combinatorial optimizations of perovskite light-emitting diodes based on all-vacuum deposition. Adv. Funct. Mater. 2019, 29, 1903607.

87. Zhao, L.; Zhang, Y.; Sun, K.; et al. Crown-ether modified thermally evaporated perovskite light-emitting devices with increased operational stability. J. Lumin. 2022, 252, 119317.

88. Vo, V. K.; Bae, S. H.; Dang, T. H. T.; et al. Tetraoctylammonium bromide interlayer between NiLiO_x and perovskite for light-emitting diodes. ACS. Appl. Mater. Interfaces. 2024, 16, 64210-21.

89. Hsieh, C. A.; Tan, G. H.; Chuang, Y. T.; et al. Vacuum-deposited inorganic perovskite light-emitting diodes with external quantum efficiency exceeding 10% via composition and crystallinity manipulation of emission layer under high vacuum. Adv. Sci. 2023, 10, e2206076.

90. Gao, Y.; Liu, Y.; Zhang, F.; et al. High-performance perovskite light-emitting diodes enabled by passivating defect and constructing dual energy-transfer pathway through functional perovskite nanocrystals. Adv. Mater. 2022, 34, e2207445.

91. Dong, C.; Chen, G.; Wang, S.; Yu, Z.; Ke, W.; Fang, G. High-performance green light-emitting-diode enabled by simultaneous phase engineering and crystallization regulation. Adv. Funct. Mater. 2025, 35, 2502662.

92. Warby, J. H.; Wenger, B.; Ramadan, A. J.; et al. Revealing factors influencing the operational stability of perovskite light-emitting diodes. ACS. Nano. 2020, 14, 8855-65.

93. Xiong, W.; Zou, C.; Tang, W.; et al. Efficient and bright blue perovskite LEDs enabled by a carbazole-phosphonic acid interface. ACS. Energy. Lett. 2023, 8, 2897-903.

94. Kirsch, C.; Naujoks, T.; Haizmann, P.; et al. Zwitterionic carbazole ligands enhance the stability and performance of perovskite nanocrystals in light-emitting diodes. ACS. Appl. Mater. Interfaces. 2023, 15, 32744-52.

95. Lai, Y.; Chen, C.; Yu, M.; et al. Dual functionality of carbazole-based phosphonic acid molecular additives realizes efficient hole transport layer-free perovskite light-emitting diodes. Chem. Eng. J. 2025, 504, 158876.

96. Kim, J. S.; Lee, H. D.; Jung, J. H.; et al. Kinetically-controlled intermediate-direct-pinning for homogeneous energy landscapes in quasi-two-dimensional perovskites for efficient and narrow blue emission. Nat. Commun. 2025, 16, 9590.

97. Yang, X.; Zhang, X.; Deng, J.; et al. Efficient green light-emitting diodes based on quasi-two-dimensional composition and phase engineered perovskite with surface passivation. Nat. Commun. 2018, 9, 570.

98. Chiang, K. M.; Hsu, B. W.; Chang, Y. A.; Yang, L.; Tsai, W. L.; Lin, H. W. Vacuum-deposited organometallic halide perovskite light-emitting devices. ACS. Appl. Mater. Interfaces. 2017, 9, 40516-22.

99. Wang, L.; Li, J.; Du, P.; et al. Effect of post-annealing on thermally evaporated reduced-dimensional perovskite LEDs. Appl. Phys. Lett. 2022, 120, 081107.

100. Fu, Y.; Zhang, Q.; Zhang, D.; et al. Scalable all-evaporation fabrication of efficient light-emitting diodes with hybrid 2D-3D perovskite nanostructures. Adv. Funct. Mater. 2020, 30, 2002913.

101. Meng, N.; Li, Y.; Shi, X.; et al. Fully thermal-evaporated perovskite light-emitting diodes with brightness exceeding 240 000 nits. Adv. Funct. Mater. 2025, 35, e10484.

102. Lee, M. H.; Kim, J.; Han, J.; et al. Fabrication of conductive perovskite-additive networks via sequential vacuum deposition for perovskite light-emitting diodes. ACS. Energy. Lett. 2025, 10, 2898-905.

103. Li, M.; Zhao, Y.; Qin, X.; et al. Conductive phosphine oxide passivator enables efficient perovskite light-emitting diodes. Nano. Lett. 2022, 22, 2490-6.

104. Zhao, C.; Wu, W.; Zhan, H.; et al. Phosphonate/phosphine oxide dyad additive for efficient perovskite light-emitting diodes. Angew. Chem. Int. Ed. Engl. 2022, 61, e202117374.

105. Lin, K.; Xing, J.; Quan, L. N.; et al. Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent. Nature 2018, 562, 245-8.

106. Peng, C.; Chen, B.; Liu, X.; et al. High-performance thermally evaporated blue perovskite light-emitting diodes enabled by post-evaporation passivation. Chem. Eng. J. 2024, 499, 155955.

107. Sun, L.; He, X.; He, Z.; et al. Improved vacuum-evaporated blue perovskite light-emitting diodes with phenethylammonium chloride and guanidinium bromide synergistic post-processing modification. Front. Optoelectron. 2025, 18, 5.

108. Liu, N.; Liu, Z.; Huang, Y.; et al. Fluorine-modified passivator for efficient vacuum-deposited pure-red perovskite light-emitting diodes. Light. Sci. Appl. 2025, 14, 118.

109. Dong, J.; Zhao, B.; Ji, H.; et al. Multivalent-effect immobilization of reduced-dimensional perovskites for efficient and spectrally stable deep-blue light-emitting diodes. Nat. Nanotechnol. 2025, 20, 507-14.

110. He, S.; Qin, L.; Liu, Z.; Kang, J. W.; Luo, J.; Du, J. Efficient thermally evaporated near-infrared perovskite light-emitting diodes via phase regulation. Nanomicro. Lett. 2025, 17, 270.

111. He, Z.; Peng, C.; Guo, R.; et al. High-efficiency and emission-tunable inorganic blue perovskite light-emitting diodes based on vacuum deposition. Small 2024, 20, e2305379.

112. Yuan, F.; Ran, C.; Zhang, L.; et al. A cocktail of multiple cations in inorganic halide perovskite toward efficient and highly stable blue light-emitting diodes. ACS. Energy. Lett. 2020, 5, 1062-9.

113. Huang, Y.; Tang, P.; Zhang, W.; et al. Sodium doping for enhanced performance by highly efficient CsPbBr₃ quantum dot-based electroluminescent light-emitting diodes. J. Mater. Chem. C. 2022, 10, 3729-37.

114. Ge, Z.; Wan, S.; Moin, M.; et al. Boosting electronic properties of CsPbBr₃ nanocrystals via lithium-ion doping and surface passivation for enhanced electrical conductivity and efficient white light-emitting diodes. Adv. Sci. 2025, 12, e2417304.

115. Travis, W.; Glover, E. N. K.; Bronstein, H.; Scanlon, D. O.; Palgrave, R. G. On the application of the tolerance factor to inorganic and hybrid halide perovskites: a revised system. Chem. Sci. 2016, 7, 4548-56.

116. Dumont, A.; Ho, K.; Kung, H.; et al. Extraordinary mass transport and self-assembly: a pathway to fabricate luminescent CsPbBr₃ and light-emitting diodes by vapor-phase deposition. Adv. Mater. Interfaces. 2020, 7, 2000506.

117. Qin, F.; Tian, H.; Yan, M.; Fang, Y.; Yang, D. Cesium-lead-bromide perovskites with balanced stoichiometry enabled by sodium-bromide doping for all-vacuum deposited silicon-based light-emitting diodes. J. Mater. Chem. C. 2021, 9, 2016-23.

118. Kim, Y.; Kim, N.; Kwon, J.; et al. Multifunctional NaF-stacked structure for vacuum-processed perovskite light-emitting diodes. ACS. Energy. Lett. 2025, 10, 4194-202.

119. Bai, T.; Wang, S.; Zhang, W.; Yi, L. Vacuum evaporation deposited Rb_xCs_1-xPbBr₃ thin films for spectrally tunable and stable all-inorganic blue light-emitting diodes. Mater. Sci. Semicond. Process. 2025, 186, 109085.

120. Musálek, T.; Liška, P.; Morsa, A.; et al. Single- vs dual-source vapor deposition of inorganic halide perovskites: a case study of CsPbBr₃. APL. Mater. 2025, 13, 031118.

121. Shekarnoush, M.; Fernandez-izquierdo, L.; Aguirre-tostado, F. S.; Shamsi, Z. H.; Quevedo-lopez, M. A. Decoding the mechanisms of room-temperature solid-state synthesis of halide perovskites. Chem. Mater. 2023, 35, 8909-21.

122. Dmitruk, I.; Vikhrova, Y.; Dmytruk, A.; et al. Clusters of cesium-lead-iodide perovskites in the zeolite matrix. ACS. Omega. 2021, 6, 27711-5.

123. Ya-qiang, S.; Dong-yun, L.; Yang, X.; Hong-liang, G.; Qiang, X.; Hui, Y. Influence mechanism of halide additives on phase conversion, morphology, and purity of alumina powders prepared by solid-phase calcination method. Ceram. Int. 2022, 48, 8403-8.

124. Huang, X.; Sun, Q.; Devakumar, B. Facile low-temperature solid-state synthesis of efficient blue-emitting Cs₃Cu₂I₅ powder phosphors for solid-state lighting. Mater. Today. Chem. 2020, 17, 100288.

125. Huang, X.; Wang, S.; Devakumar, B.; Ma, N. One-step low-temperature solid-state synthesis of lead-free cesium copper halide Cs₃Cu₂Br₅ phosphors with bright blue emissions. Mater. Today. Chem. 2022, 23, 100678.

126. Hu, Y. L.; Wen, Q. L.; Pu, Z. F.; et al. Rapid synthesis of cesium lead halide perovskite nanocrystals by l-lysine assisted solid-phase reaction at room temperature. RSC. Adv. 2020, 10, 34215-24.

127. Zhang, T.; Bai, Y.; Feng, S.; et al. Mechanical milling processed highly luminescent Cs-Pb-Br perovskite emitters. Chem. Commun. 2023, 59, 11827-30.

128. Wang, L.; Ma, D.; Guo, C.; et al. CsPbBr₃ nanocrystals prepared by high energy ball milling in one-step and structural transformation from CsPbBr₃ to CsPb₂Br₅. Appl. Surf. Sci. 2021, 543, 148782.

129. Zhu, Z. Y.; Yang, Q. Q.; Gao, L. F.; et al. Solvent-free mechanosynthesis of composition-tunable cesium lead halide perovskite quantum dots. J. Phys. Chem. Lett. 2017, 8, 1610-4.

130. Baek, K. Y.; Lee, W.; Lee, J.; et al. Mechanochemistry-driven engineering of 0D/3D heterostructure for designing highly luminescent Cs-Pb-Br perovskites. Nat. Commun. 2022, 13, 4263.

131. Lim, H.; Baek, K.; Kim, J. I.; et al. Mechanochemical synthesis and thin-film deposition of zero-dimensional cesium lead mixed-halide perovskites for wide-range color-tunable emission. Chem. Mater. 2023, 35, 6294-303.

132. Xuan, T.; Lou, S.; Huang, J.; et al. Monodisperse and brightly luminescent CsPbBr₃/Cs₄PbBr₆ perovskite composite nanocrystals. Nanoscale 2018, 10, 9840-4.

133. Huang, C.; Huang, S.; Wu, C.; Wang, Z.; Yang, C. Cs₄PbBr₆/CsPbBr₃ nanocomposites for all-inorganic electroluminescent perovskite light-emitting diodes. ACS. Appl. Nano. Mater. 2020, 3, 11760-8.

134. Liu, N.; Zhao, X.; Xia, M.; et al. Light-emitting diodes based on all-inorganic copper halide perovskite with self-trapped excitons. J. Semicond. 2020, 41, 052204.

135. Wang, C.; Chen, S.; Jie, J.; et al. Metal halide perovskite single crystals toward electroluminescent applications. Adv. Funct. Mater. 2025, 35, 2401189.

136. Lin, C.; Liu, L.; Xu, J.; et al. Facile synthesis of a dual-phase CsPbBr₃-CsPb₂Br₅ single crystal and its photoelectric performance. RSC. Adv. 2020, 10, 20745-52.

137. Zhang, L.; Li, X.; Tian, Y.; et al. Ultrafast one-step deposition route to fabricate single-crystal CsPbX₃ (X = Cl, Cl/Br, Br, and Br/I) photodetectors. ACS. Appl. Mater. Interfaces. 2023, 15, 13270-80.

138. Dang, Y.; Ju, D.; Wang, L.; Tao, X. Recent progress in the synthesis of hybrid halide perovskite single crystals. CrystEngComm 2016, 18, 4476-84.

139. Kominko, Y.; Sabisch, S.; Kanak, A.; et al. Stable, room-temperature, low-threshold amplified spontaneous emission from thermally evaporated cesium lead halide perovskites. ACS. Nano. 2025, 19, 29216-27.

140. Jun, T.; Sim, K.; Iimura, S.; et al. Lead-free highly efficient blue-emitting Cs₃Cu₂I₅ with 0D electronic structure. Adv. Mater. 2018, 30, e1804547.

141. Liu, C.; Chen, H.; Lin, P.; et al. Growth, characterization and photoelectrical properties of orthorhombic and cubic CsPbBr₃ single crystals. J. Mater. Sci. Mater. Electron. 2022, 33, 24895-905.

142. Chen, Y. M.; Zhou, Y.; Zhao, Q.; et al. Cs₄PbBr₆/CsPbBr₃ perovskite composites with near-unity luminescence quantum yield: large-scale synthesis, luminescence and formation mechanism, and white light-emitting diode application. ACS. Appl. Mater. Interfaces. 2018, 10, 15905-12.

143. Wang, Z.; Zhang, Y.; Liu, X.; et al. High stability and strong luminescence CsPbBr₃/Cs₄PbBr₆ perovskite nanocomposite: large-scale synthesis, reversible luminescence, and anti-counterfeiting application. Adv. Mater. Technol. 2021, 6, 2100654.

144. Bae, S. R.; Seol, M. J.; Kim, S. Y. CsPbBr₃ and Cs₄PbBr₆ perovskite light-emitting diodes using a thermally evaporated host-dopant system. Nanoscale 2023, 15, 9533-42.

145. Seo, G.; Jung, H.; Creason, T. D.; et al. Lead-free halide light-emitting diodes with external quantum efficiency exceeding 7% using host-dopant strategy. ACS. Energy. Lett. 2021, 6, 2584-93.

146. Matsushima, T.; Qin, C.; Goushi, K.; et al. Enhanced electroluminescence from organic light-emitting diodes with an organic-inorganic perovskite host layer. Adv. Mater. 2018, 30, e1802662.

147. Lanzetta, L.; Gregori, L.; Hernandez, L. H.; et al. Dissociative host-dopant bonding facilitates molecular doping in halide perovskites. ACS. Energy. Lett. 2023, 8, 2858-67.

148. Lee, K. J.; Merdad, N. A.; Maity, P.; et al. Engineering band-type alignment in CsPbBr₃ perovskite-based artificial multiple quantum wells. Adv. Mater. 2021, 33, e2005166.

149. Chin, S.; Cortecchia, D.; Forzatti, M.; et al. Stabilizing single-source evaporated perovskites with organic interlayers for amplified spontaneous emission. Adv. Opt. Mater. 2024, 12, 2302701.

150. Li, J.; Du, P.; Guo, Q.; et al. Efficient all-thermally evaporated perovskite light-emitting diodes for active-matrix displays. Nat. Photon. 2023, 17, 435-41.

151. Ji, S.; Bae, S. R.; Hu, L.; et al. Perovskite light-emitting diode display based on MoS₂ backplane thin-film transistors. Adv. Mater. 2024, 36, e2309531.

152. Guo, Q.; Wang, L.; Yang, L.; et al. Spectra stable deep-blue light-emitting diodes based on cryolite-like cerium(III) halides with nanosecond d-f emission. Sci. Adv. 2022, 8, eabq2148.

153. Zhu, J.; Li, J.; Huang, Y.; et al. All-thermally evaporated blue perovskite light-emitting diodes for active matrix displays. Small. Methods. 2024, 8, e2300712.

154. Li, Y.; Meng, N.; Xu, Y.; et al. Sequential layer-by-layer deposition for high-performance fully thermal-evaporated red perovskite light-emitting diodes. Nat. Commun. 2025, 16, 6908.

155. Tan, Y.; Li, R.; Xu, H.; Qin, Y.; Song, T.; Sun, B. Ultrastable and reversible fluorescent perovskite films used for flexible instantaneous display. Adv. Funct. Mater. 2019, 29, 1900730.

156. Zhang, X.; Li, J.; Du, P.; et al. Structural engineering for efficient transparent vacuum-deposited perovskite light-emitting diodes toward intelligent display. ACS. Appl. Mater. Interfaces. 2024, 16, 67900-8.

157. Du, P.; Li, J.; Wang, L.; et al. Vacuum-deposited blue inorganic perovskite light-emitting diodes. ACS. Appl. Mater. Interfaces. 2019, 11, 47083-90.

158. Liu, N.; Luo, J.; Tang, J. Shadow effect in dual‐source thermally evaporated perovskite patterns. J. Soc. Info. Display. 2025, 33, 66-73.

159. Burlingame, Q. C.; Kaplan, A. B.; Liu, T.; Loo, Y. Persistent iodine contamination resulting from thermal evaporation of inorganic perovskites. J. Vac. Sci. Technol. B. 2022, 40, 060601.

160. La-placa, M.; Guo, D.; Gil-escrig, L.; Palazon, F.; Sessolo, M.; Bolink, H. J. Dual-source vacuum deposition of pure and mixed halide 2D perovskites: thin film characterization and processing guidelines. J. Mater. Chem. C. 2020, 8, 1902-8.

161. Lee, S.; Kim, J.; Kim, H.; et al. Brightening deep-blue perovskite light-emitting diodes: a path to Rec. 2020. Sci. Adv. 2024, 10, eadn8465.

162. Cao, L. X.; Zhang, Y. H.; Shen, Y.; Li, Y. Q.; Tang, J. X. Crystallization regulation of solution-processed metal halide perovskite light-emitting diodes. Chem. Sci. 2026, 17, 118-36.

163. Gao, Y.; Cai, Q.; He, Y.; et al. Highly efficient blue light-emitting diodes based on mixed-halide perovskites with reduced chlorine defects. Sci. Adv. 2024, 10, eado5645.

164. Li, M.; Yang, Y.; Kuang, Z.; et al. Acceleration of radiative recombination for efficient perovskite LEDs. Nature 2024, 630, 631-5.

165. Xing, S.; Yuan, Y.; Zhang, G.; et al. Energy-efficient perovskite LEDs with rec. 2020 compliance. ACS. Energy. Lett. 2024, 9, 3643-51.

166. Cao, Y. B.; Zhang, D.; Zhang, Q.; et al. High-efficiency, flexible and large-area red/green/blue all-inorganic metal halide perovskite quantum wires-based light-emitting diodes. Nat. Commun. 2023, 14, 4611.

167. Kong, L.; Sun, Y.; Zhao, B.; et al. Fabrication of red-emitting perovskite LEDs by stabilizing their octahedral structure. Nature 2024, 631, 73-9.

168. Zhang, D.; Liu, J.; Duan, X.; et al. Efficient deep-red perovskite light-emitting diodes based on a vertical 3D/2D perovskite heterojunction. Adv. Funct. Mater. 2024, 34, 2403874.

169. Kwon, J.; Kim, Y.; Kim, N.; et al. In situ molecular passivation for improved performance and spectral stability in thermally evaporated pure blue perovskite light-emitting diodes. Ind. Chem. Mater. 2025.