REFERENCES
1. Scrosati B, Garche J. Lithium batteries: status, prospects and future. J Power Sources 2010;195:2419-30.
2. Tian X, Yi Y, Fang B, et al. Design strategies of safe electrolytes for preventing thermal runaway in lithium ion batteries. Chem Mater 2020;32:9821-48.
3. Cho T, Tanaka M, Ohnishi H, et al. Composite nonwoven separator for lithium-ion battery: development and characterization. J Power Sources 2010;195:4272-7.
4. Kim M, Park JH. Inorganic thin layer coated porous separator with high thermal stability for safety reinforced Li-ion battery. J Power Sources 2012;212:22-7.
5. Cheng XB, Zhang R, Zhao CZ, Wei F, Zhang JG, Zhang Q. A review of solid electrolyte interphases on lithium metal anode. Adv Sci 2016;3:1500213.
6. Zheng G, Lee SW, Liang Z, et al. Interconnected hollow carbon nanospheres for stable lithium metal anodes. Nat Nanotechnol 2014;9:618-23.
7. Ma F, Zhang Z, Yan W, et al. Solid polymer electrolyte based on polymerized ionic liquid for high performance all-solid-state lithium-ion batteries. ACS Sustain Chem Eng 2019;7:4675-83.
8. Chen D, Liu T, Zhou X, Tjiu WC, Hou H. Electrospinning fabrication of high strength and toughness polyimide nanofiber membranes containing multiwalled carbon nanotubes. J Phys Chem B 2009;113:9741-8.
9. Dong G, Sun G, Tian G, Qi S, Wu D. Robust polyimide nanofibrous membrane with bonding microstructures fabricated via dipping process for lithium-ion battery separators. Energy Technol 2019;7:1801072.
10. Dong G, Liu B, Sun G, Tian G, Qi S, Wu D. TiO2 nanoshell@polyimide nanofiber membrane prepared via a surface-alkaline-etching and in-situ complexation-hydrolysis strategy for advanced and safe LIB separator. J Membr Sci 2019;577:249-57.
11. Dong G, Dong N, Liu B, Tian G, Qi S, Wu D. Ultrathin inorganic-nanoshell encapsulation: TiO2 coated polyimide nanofiber membrane enabled by layer-by-layer deposition for advanced and safe high-power LIB separator. J Membr Sci 2020;601:117884.
12. Elia GA, Ducros JB, Sotta D, et al. Polyacrylonitrile separator for high-performance aluminum batteries with improved interface stability. ACS Appl Mater Interfaces 2017;9:38381-9.
13. Liu J, Liu Y, Yang W, Ren Q, Li F, Huang Z. Lithium ion battery separator with high performance and high safety enabled by tri-layered SiO2@PI/m-PE/SiO2@PI nanofiber composite membrane. J Power Sources 2018;396:265-75.
14. Shi C, Dai J, Shen X, et al. A high-temperature stable ceramic-coated separator prepared with polyimide binder/Al2O3 particles for lithium-ion batteries. J Membr Sci 2016;517:91-9.
15. Zhu C, Nagaishi T, Shi J, et al. Enhanced wettability and thermal stability of a novel polyethylene terephthalate-based poly(vinylidene fluoride) nanofiber hybrid membrane for the separator of lithium-ion batteries. ACS Appl Mater Interfaces 2017;9:26400-6.
16. Battery properties of Li-ion battery with non-woven fabric separators. The 51th Battery Symposium in Japan, Nagoya 2010, 1b25.
17. Nishikawa S. Characterization of aramid coated fine porous pe separator. The 47th Battery Symposium in Japan, Tokyo 2006, 2e06.
18. Jung YS, Cavanagh AS, Gedvilas L, et al. Improved functionality of lithium-ion batteries enabled by atomic layer deposition on the porous microstructure of polymer separators and coating electrodes. Adv Energy Mater 2012;2:1022-7.
19. Jiang W, Liu Z, Kong Q, et al. A high temperature operating nanofibrous polyimide separator in Li-ion battery. Solid State Ion 2013;232:44-8.
20. Sun G, Liu B, Niu H, et al. In situ welding: superb strength, good wettability and fire resistance tri-layer separator with shutdown function for high-safety lithium ion battery. J Membr Sci 2020;595:117509.
21. Tan J, Kong L, Qiu Z, Yan Y. Flexible, high-wettability and thermostable separator based on fluorinated polyimide for lithium-ion battery. J Solid State Electrochem 2018;22:3363-73.
22. Wu D, Shi C, Huang S, et al. Electrospun nanofibers for sandwiched polyimide/poly (vinylidene fluoride)/polyimide separators with the thermal shutdown function. Electrochim Acta 2015;176:727-34.
23. Zhang H, Lin C, Zhou M, John AE, Zhu B. High thermal resistance polyimide separators prepared via soluble precusor and non-solvent induced phase separation process for lithium ion batteries. Electrochim Acta 2016;187:125-33.
24. Lu Z, Sui F, Miao Y, et al. Polyimide separators for rechargeable batteries. J Energy Chem 2021;58:170-97.
25. Zhang C, Li H, Wang S, et al. A polyethylene microsphere-coated separator with rapid thermal shutdown function for lithium-ion batteries. J Energy Chem 2020;44:33-40.
26. Wang B, Prinsen P, Wang H, et al. Macroporous materials: microfluidic fabrication, functionalization and applications. Chem Soc Rev 2017;46:855-914.
27. Ma D, Cao Z, Wang H, Huang X, Wang L, Zhang X. Three-dimensionally ordered macroporous FeF3 and its in situ homogenous polymerization coating for high energy and power density lithium ion batteries. Energy Environ Sci 2012;5:8538-42.
28. Hatton B, Mishchenko L, Davis S, Sandhage KH, Aizenberg J. Assembly of large-area, highly ordered, crack-free inverse opal films. Proc Natl Acad Sci USA 2010;107:10354-9.
29. Phillips KR, England GT, Sunny S, et al. A colloidoscope of colloid-based porous materials and their uses. Chem Soc Rev 2016;45:281-322.
30. Stein A, Wilson BE, Rudisill SG. Design and functionality of colloidal-crystal-templated materials-chemical applications of inverse opals. Chem Soc Rev 2013;42:2763-803.
31. Lee H, Yanilmaz M, Toprakci O, Fu K, Zhang X. A review of recent developments in membrane separators for rechargeable lithium-ion batteries. Energy Environ Sci 2014;7:3857-86.
32. Laman FC, Gee MA, Denovan J. Impedance studies for separators in rechargeable lithium batteries. J Electrochem Soc 1993;140:L51-3.
33. Abraham K. Directions in secondary lithium battery research and development. Electrochim Acta 1993;38:1233-48.
34. Zhang SS. A review on the separators of liquid electrolyte Li-ion batteries. J Power Sources 2007;164:351-64.
35. Wu D, Huang S, Xu Z, et al. Polyethylene terephthalate/poly (vinylidene fluoride) composite separator for Li-ion battery. J Phys D Appl Phys 2015;48:285305.
36. Cheng XB, Peng HJ, Huang JQ, Zhang R, Zhao CZ, Zhang Q. Dual-phase lithium metal anode containing a polysulfide-induced solid electrolyte interphase and nanostructured graphene framework for lithium-sulfur batteries. ACS Nano 2015;9:6373-82.
37. Ju Z, Nai J, Wang Y, et al. Biomacromolecules enabled dendrite-free lithium metal battery and its origin revealed by cryo-electron microscopy. Nat Commun 2020;11:488.
