REFERENCES

1. Zhou G, Chen H, Cui Y. Formulating energy density for designing practical lithium-sulfur batteries. Nat Energy 2022;7:312-9.

2. Hu Y, Chen W, Lei T, et al. Strategies toward high-loading lithium-sulfur battery. Adv Energy Mater 2020;10:2000082.

3. Yang X, Li X, Adair K, et al. Structural design of lithium-sulfur batteries: from fundamental research to practical application. Electrochem Energy Rev 2018;1:239-93.

4. Li G, Wang S, Zhang Y, et al. Revisiting the role of polysulfides in lithium-sulfur batteries. Adv Mater 2018;30:e1705590.

5. Song J, Guo X, Zhang J, et al. Rational design of free-standing 3D porous MXene/rGO hybrid aerogels as polysulfide reservoirs for high-energy lithium-sulfur batteries. J Mater Chem A 2019;7:6507-13.

6. He J, Bhargav A, Manthiram A. Molybdenum boride as an efficient catalyst for polysulfide redox to enable high-energy-density lithium-sulfur batteries. Adv Mater 2020;32:e2004741.

7. Xie Y, Cao J, Wang X, Li W, et al. MOF-derived bifunctional Co_0.85Se nanoparticles embedded in n-doped carbon nanosheet arrays as efficient sulfur hosts for lithium-sulfur batteries. Nano Lett 2021;21:8579-86.

8. Song C, Jin Q, Zhang W, et al. Prussian blue analogs derived Fe-Ni-P@nitrogen-doped carbon composites as sulfur host for high-performance lithium-sulfur batteries. J Colloid Interf Sci 2021;595:51-8.

9. Yu Y, Yan M, Dong W, et al. Optimizing inner voids in yolk-shell TiO₂ nanostructure for high-performance and ultralong-life lithium-sulfur batteries. Chem Eng J 2021;417:129241.

10. Yu P, Feng L, Ma D, et al. Template-free self-caging nanochemistry for large-scale synthesis of sulfonated-graphene@sulfur nanocage for long-life lithium-sulfur batteries. Adv Funct Mater 2021;31:2008652.

11. Song X, Wang S, Chen G, et al. Fe-N-doped carbon nanofiber and graphene modified separator for lithium-sulfur batteries. Chem Eng J 2018;333:564-71.

12. Li C, Liu R, Xiao Y, et al. Recent progress of separators in lithium-sulfur batteries. Energy Storage Mater 2021;40:439-60.

13. Feng J, Li Y, Yuan J, et al. Energy-saving synthesis of functional CoS₂/rGO interlayer with enhanced conversion kinetics for high-performance lithium-sulfur batteries. Front Chem 2022;9:830485.

14. Li Q, Liu Y, Yang L, et al. N, O co-doped chlorella-based biomass carbon modified separator for lithium-sulfur battery with high capacity and long cycle performance. J Colloid Interf Sci 2021;585:43-50.

15. Shin H, Baek M, Gupta A, et al. Recent progress in high donor electrolytes for lithium-sulfur batteries. Adv Energy Mater 2020;10:2001456.

16. Yang Q, Deng N, Chen J, et al. The recent research progress and prospect of gel polymer electrolytes in lithium-sulfur batteries. Chem Eng J 2021;413:127427.

17. Zhou Z, Sun T, Cui J, et al. A homogenous solid polymer electrolyte prepared by facile spray drying method is used for room-temperature solid lithium metal batteries. Nano Res 2021.

18. Tran M X, Enggar Anugrah Ardhi R, Liu G, et al. Plasma-polymerized C₆₀-coated CNT interlayer with physical and chemical functions for lithium-sulfur batteries. Chem Eng J 2020;401:126075.

19. Zheng M, Chi Y, Hu Q, et al. Carbon nanotube-based materials for lithium-sulfur batteries. J Mater Chem A 2019;7:17204-41.

20. Huo J, Shen Z, Cao X, et al. Macro/micro-environment regulating carbon-supported single-atom catalysts for hydrogen/oxygen conversion reactions. Small 2022;18:2202394.

21. Li J, Zhang H, Luo L, et al. Blocking polysulfides with a Janus Fe₃C/N-CNF@RGO electrode via physiochemical confinement and catalytic conversion for high-performance lithium-sulfur batteries. J Mater Chem A 2021;9:2205-13.

22. Jing F, Ma Z, Wang J, et al. Oxygen vacancy inducing phase transition during charge storage in MnO_x@rGO supercapacitor electrode. Chem Eng J 2022;435:135103.

23. Fan L, Wu H, Wu X, et al. Fe-MOF derived jujube pit like Fe₃O₄/C composite as sulfur host for lithium-sulfur battery. Electrochim Acta 2019;295:444-51.

24. Cao X, Huo J, Li L, et al. Recent advances in engineered ru-based electrocatalysts for the hydrogen/oxygen conversion reactions. Adv Energy Mater 2022;12:2202119.

25. Liu H, Liu X, Li W, et al. Porous carbon composites for next generation rechargeable lithium batteries. Adv Energy Mater 2017;7:1700283.

26. Chung S, Manthiram A. High-performance Li-S batteries with an ultra-lightweight MWCNT-coated separator. J Phys Chem Lett 2014;5:1978-83.

27. Zhou G, Li L, Wang D, et al. A flexible sulfur-graphene-polypropylene separator integrated electrode for advanced Li-S batteries. Adv Mater 2015;27:641-7.

28. Chen Y, Wang T, Tian H, et al. Advances in lithium-sulfur batteries: from academic research to commercial viability. Adv Mater 2021;33:2003666.

29. Ma L, Yu L, Liu J, et al. Construction of Ti₄O₇/TiN/carbon microdisk sulfur host with strong polar N-Ti-O bond for ultralong life lithium-sulfur battery. Energy Storage Mater 2022;44:180-9.

30. Lu K, Zhang H, Gao S, et al. Manipulating polysulfides conversion with strongly coupled Fe₃O₄ and nitrogen doped carbon for stable and high capacity lithium-sulfur batteries. Adv Funct Mater 2019;29:1807309.

31. Li Q, Ma Z, Zhao J, et al. A flexible self-supporting ultralong MnO₂ nanowires-expanded graphite nanosheets current collector with enhanced catalytic reaction kinetics for high-loading lithium-sulfur batteries. J Power Sources 2022;521:230929.

32. Wang S, Hou X, Zhong Z, et al. Co₃O₄-NP embedded mesoporous carbon rod with enhanced electrocatalytic conversion in lithium-sulfur battery. Sci Rep 2018;8:16133.

33. Xu K, Liang X, Wang L, et al. Tri-functionalized polypropylene separator by rGO/MoO₂ composite for high-performance lithium-sulfur batteries. Rare Metals 2021;40:2810-8.

34. Xia G, Ye J, Zheng Z, et al. Catalytic FeP decorated carbon black as a multifunctional conducting additive for high-performance lithium-sulfur batteries. Carbon 2021;172:96-105.

35. Zhang H, Xin S, Li J, et al. Synergistic regulation of polysulfides immobilization and conversion by MOF-derived CoP-HNC nanocages for high-performance lithium-sulfur batteries. Nano Energy 2021;85:106011.

36. Zhang M, Guo Y, Wei Y, et al. Integrating conductivity and active sites: Fe/Fe₃C@GNC as an trapping-catalyst interlayer and dendrite-free lithium host for the lithium-sulfur cell with outstanding rate performance. J Mater Chem A 2020;8:8987-19000.

37. Zhou H, Sui Z, Amin K, et al. Investigating the electrocatalysis of a Ti₃C₂/carbon hybrid in polysulfide conversion of lithium-sulfur batteries. ACS Appl Mater Interfaces 2020;12:13904-13.

38. Sun W, Li Y, Liu S, et al. Mechanism investigation of iron selenide as polysulfide mediator for long-life lithium-sulfur batteries. Chem Eng J 2021;416:129166.

39. Li X, Su J, Li Z, et al. Revealing interfacial space charge storage of Li⁺/Na⁺/K⁺ by operando magnetometry. Sci Bull 2022;67:1145-53.

40. Liu S, Li Y, Zhang C, et al. Amorphous TiO₂ nanofilm interface coating on mesoporous carbon as efficient sulfur host for Lithium-Sulfur batteries. Electrochim Acta 2020;332:135458.

41. Li R, Rao D, Zhou J, et al. Amorphization-induced surface electronic states modulation of cobaltous oxide nanosheets for lithium-sulfur batteries. Nature Commun 2021;12:3102.

42. Chen X, Ding X, Wang C, et al. A multi-shelled CoP nanosphere modified separator for highly efficient Li-S batteries. Nanoscale 2018;10:13694-701.

43. Li C, Xi Z, Guo D, et al. Chemical immobilization effect on lithium polysulfides for lithium-sulfur batteries. Small 2018;14:1701986.

44. Jin R, Zhai Q, Wang Q, et al. Amorphous transition metal sulfides anchored on amorphous carbon-coated multiwalled carbon nanotubes for enhanced lithium-ion storage. Chem Eur J 2017;23:14056-63.

45. Liu L, Li Y, Zhang Y, et al. CoP@C with chemisorption-catalysis effect toward lithium polysulfides as multifunctional interlayer for high-performance lithium-sulfur batteries. Electrochim Acta 2022;419:140391.

46. Qin B, Cai Y, Wang P, et al. Crystalline molybdenum carbide-amorphous molybdenum oxide heterostructures: in situ surface reconfiguration and electronic states modulation for Li-S batteries. Energy Storage Mater 2022;47:345-53.

47. Ye Z, Jiang Y, Qian J, et al. Exceptional adsorption and catalysis effects of hollow polyhedra/carbon nanotube confined CoP nanoparticles superstructures for enhanced lithium-sulfur batteries. Nano Energy 2019;64:103965.

48. Zhang D, Luo Y, Wu B, et al. A heterogeneous FeP-CoP electrocatalyst for expediting sulfur redox in high-specific-energy lithium-sulfur batteries. Electrochim Acta 2021;397:139275.

49. Xu Y, Mo Y, Tian J, et al. The synergistic effect of graphitic N and pyrrolic N for the enhanced photocatalytic performance of nitrogen-doped graphene/TiO₂ nanocomposites. Appl Catal B Environ 2016;181:810-7.

50. Nita C, Fullenwarth J, Monconduit L, et al. Eco-friendly synthesis of SiO₂ nanoparticles confined in hard carbon: a promising material with unexpected mechanism for Li-ion batteries. Carbon 2019;143:598-609.

51. Zhou W, Zhao D, Wu Q, et al. Amorphous CoP nanoparticle composites with nitrogen-doped hollow carbon nanospheres for synergetic anchoring and catalytic conversion of polysulfides in Li-S batteries. J Colloid Interf Sci 2021;603:1-10.

52. Sun R, Bai Y, Luo M, et al. A enhancing polysulfide confinement and electrochemical kinetics by amorphous cobalt phosphide for highly efficient lithium-sulfur batteries. ACS Nano 2021;15:739-50.

53. Zhou Q, Yang X, Xiong X, et al. A solid electrolyte based on electrochemical active Li₄Ti₅O₁₂ with PVDF for solid state lithium metal battery. Adv Energy Mater 2022;12:2201991.

54. He J, Bhargav A, Manthiram A. Covalent organic framework as an efficient protection layer for a stable lithium-metal anode. Angew Chem Int Ed 2022;61:e202116586.

55. Zhu Q, Xu H, Shen K, et al. Efficient polysulfides conversion on Mo₂CT_x MXene for high-performance lithium-sulfur batteries. Rare Metals 2021;41:311-8.

56. Li J, Song J, Luo L, et al. Synergy of MXene with Se infiltrated porous N-doped carbon nanofibers as janus electrodes for high-performance sodium/lithium-selenium batteries. Adv Energy Mater 2022;12:2200894.

57. Ruan J, Sun H, Song Y, et al. Constructing 1D/2D interwoven carbonous matrix to enable high-efficiency sulfur immobilization in Li-S battery. Energy Mater 2021;1:100018.

58. Castillo J, Qiao L, Santiago A, et al. Perspective of polymer-based solid-state Li-S batteries. Energy Mater 2022;2:200003.

59. Cai M, Zhang H, Zhang Y, et al. Boosting the potassium-ion storage performance enabled by engineering of hierarchical MoSSe nanosheets modified with carbon on porous carbon sphere. Sci Bull 2022;67:933-45.

60. Xiong X, Yan W, Zhu Y, et al. Li₄Ti₅O₁₂ Coating on copper foil as ion redistributor layer for stable lithium metal anode. Adv Energy Mater 2022;12:2103112.