REFERENCES

1. Kumar A, Singh AP, Akshayveer, Singh OP. Effect of channel designs and its optimization for enhanced thermo-hydraulic performance of solar air heater. J Sol Energy Eng 2022;144:051009.

2. Karabulut K. The effects of rectangular baffle angles and heights on heat transfer and pressure drop performance in cross-triangular grooved rectangular flow ducts. Int J Heat Fluid Flow 2024;105:109260.

3. Wu Z, Zhou S, Li Y, Jin W, Luo Y. Air duct optimization design based on local turbulence loss analysis and IMOCS algorithm. Machines 2023;11:129.

4. Cao Y, Wang D, He Y, Lu Y, Mao J, Hou H. Resolution of HEV battery cooling system inlet noise issue by optimizing duct design and fan speed control strategy. SAE Int J Engines 2018;11:67-78.

5. Morelli A, Baldrani R, Ghidoni A, Noventa G. Steam boiler mixing channel optimization with a surrogate based multi objective genetic algorithm. Therm Sci Eng Prog 2022;29:101169.

6. Hanan L, Qiushi L, Shaobin L. An integrated optimization design method based on surrogate modeling applied to diverging duct design. Int J Turbo Jet Eng 2016;33:395-405.

7. Czetany L, Szantho Z, Lang P. Rectangular supply ducts with varying cross section providing uniform air distribution. Appl Therm Eng 2017;115:141-51.

8. Alfaro-Ayala JA, Uribe-Ramírez AR, Minchaca-Mojica JI, Ramírez-Minguela JDJ, Alvarado-Alcalá BU, López-Núñez OA. Numerical prediction of the unsteady temperature distribution in a cooling cabinet. Int J Refrigeration 2017;73:235-45.

9. Immonen E. Shape optimization of annular S-ducts by CFD and high-order polynomial response surfaces. EC 2018;35:932-54.

10. Wang Z, Fimbres Weihs G, Neal P, Wiley D. Effect of storage capacity on CO₂ pipeline optimisation. Energy Proced 2014;63:2757-63.

11. Oyewola OM, Idowu ET. Effects of step-like plenum, flow pattern and inlet flow regime on thermal management system. Appl Therm Eng 2024;243:122637.

12. Kodali C, Idem S. Modeling flow and pressure distributions in multi-branch light-commercial duct systems. Sci Technol Built Environ 2021;27:240-52.

13. Avcı H, Kumlutaş D, Özer Ö, Özşen M. Optimisation of the design parameters of a domestic refrigerator using CFD and artificial neural networks. Int J Refrigeration 2016;67:227-38.

14. Tao M, Guo K, Liu H, Liu C. An evolutionary optimization method to design shapes of flow channels. Chem Eng Trans 2017;61:1513-8.

15. Kong KH, Chong WT. Static balance duct design method and temperature dependent variable air volume systems. Build Serv Eng Res Technol 2019;40:698-713.

16. Ye J, Wargocki P, Ai Z. Improving the CFD predictive accuracy of particle fate in turbulent duct flows: four key issues and applications in in-duct UVGI system. J Build Eng 2023;80:108010.

17. Zhou J, Liu J, Qi H, Shan W. Cross-phase automated structural design of modular buildings using a unified matrix method and multi-objective optimization. Expert Syst Appl 2024;249:123788.

18. Gupta S, Gupta S, Agrawal A, Singla E. A novel modular approach for kinematic modeling and analysis of planar hybrid manipulators. J Mech Des 2021;143:093302.

19. Chen Y, Chen WZ, Chen K, Shao JY, Zhang WM. Mechanism configuration of super-redundant robot. AMR 2013;744:68-73.

20. Bertran MO, Babi DK. Exploration and evaluation of modular concepts for the design of full-scale pharmaceutical manufacturing facilities. Biotechnol Bioeng 2024;121:2241-57.

21. You ZH, Smith S. A multi-objective modular design method for creating highly distinct independent modules. Res Eng Des 2016;27:179-91.

22. Zhang Y, Zhang K, Liu J, Kosonen R, Yuan X. Airflow uniformity optimization for modular data center based on the constructal T-shaped underfloor air ducts. Appl Therm Eng 2019;155:489-500.

23. Ji Y, Jiao RJ, Chen L, Wu C. Green modular design for material efficiency: a leader-follower joint optimization model. J Clean Prod 2013;41:187-201.

24. Ke Q, Shang S, Jiang F, Huang H, Wei B. Optimization design of duct fan and evaporator module in refrigeration system with heat exchange and fan power. J Adv Mech Des Syst Manuf 2021;15:JAMDSM0034.

25. Li Q, Zhang M, Ouyang Y, Wen Z. Numerical investigation on flow and heat transfer of supercritical CO₂ in variable cross-section tubes under precooler working conditions. Appl Therm Eng 2023;235:121419.

26. Household and similar refrigerating appliances. Beijing: Standards Press of China; 2016. (in Chinese) Available from: https://www.nssi.org.cn/nssi/front/106407736.html. [Last accessed on 12 Oct 2024].