REFERENCES
1. Yu Y, Gong J, Fang X, et al. Comparison of surface integrity of GH4169 superalloy after high-energy, low-energy, and femtosecond laser shock peening. Vacuum 2023;208:111740.
2. Cai Z, Li Z, Yin M, Zhu M, Zhou Z. A review of fretting study on nuclear power equipment. Tribol Int 2020;144:106095.
3. Zhou L, Li X, He D, et al. Study on properties of potassium sodium niobate coating prepared by high efficiency supersonic plasma spraying. Actuators 2022;11:28.
4. Wang J, Lu Z, Huang Y, et al. The mechanism for the enhanced mechanical and piezoelectricity properties of La2O3 doped BaTiO3 ceramic coatings prepared by plasma spray. J Alloys Compd 2022;897:162944.
5. Sha J, Chen L, Liu Y, et al. Phase transformation-induced improvement in hardness and high-temperature wear resistance of plasma-sprayed and remelted NiCrBSi/WC coatings. Metals 2020;10:1688.
6. Rachidi R, El Kihel B, Delaunois F. Microstructure and mechanical characterization of NiCrBSi alloy and NiCrBSi-WC composite coatings produced by flame spraying. Mater Sci Eng B 2019;241:13-21.
7. Zhou J, Huang Y, Cai Z, et al. Preparation of NiCrBSi-WC/Co coatings by stable magnetic field assisted supersonic plasma spraying and its wear resistance mechanism. Mater Charact 2022;194:112433.
8. Zhou J, Guo W, He D, et al. Study on preparation and wear resistance of NiCrBSi-WC/Co composite coatings by pulsed magnetic field assisted supersonic plasma spraying. Surf Coat Technol 2022;448:128897.
9. Li GJ, Li J, Luo X. Effects of high temperature treatment on microstructure and mechanical properties of laser-clad NiCrBSi/WC coatings on titanium alloy substrate. Mater Charact 2014;98:83-92.
10. Liu L, Xu H, Xiao J, Wei X, Zhang G, Zhang C. Effect of heat treatment on structure and property evolutions of atmospheric plasma sprayed NiCrBSi coatings. Surf Coat Technol 2017;325:548-54.
11. Liu W, Yang X, Wan Z, Xia G, Li D, Wang S. Surface strengthening technology for mechanical parts. Surf Rev Lett 2021;28:2030006.
12. Li M, Liu D, Bai Z, et al. Hot salt corrosion behavior of Ti–6Al–4V alloy treated with different surface deformation strengthening processes. Mater Chem Phys 2023;309:128410.
13. Yin M, Cai Z, Li Z, Zhou Z, Wang W, He W. Improving impact wear resistance of Ti-6Al-4V alloy treated by laser shock peening. T Nonferr Metal Soc 2019;29:1439-48.
14. Li Z, Guo X, Yang Z, Cai Z, Jiao Y. Effect of ultrasonic surface rolling process on the microstructure and corrosion behavior of zirconium alloy in high-temperature water condition. Mater Chem Phys 2024;311:128546.
15. Yin M, Cai Z, Zhang Z, Yue W. Effect of ultrasonic surface rolling process on impact-sliding wear behavior of the 690 alloy. Tribol Int 2020;147:105600.
16. Olugbade TO, Lu J. Literature review on the mechanical properties of materials after surface mechanical attrition treatment (SMAT). Nano Mater Sci 2020;2:3-31.
17. Yao H, Hu X, Yi Z, et al. Microstructure and improved anti-corrosion properties of cold-sprayed Zn coatings fabricated by post shot-peening process. Surf Coat Technol 2021;422:127557.
18. Zhang Y, Li L, Wang X, et al. Experimental study on aluminum bronze coating fabricated by electro-spark deposition with subsequent ultrasonic surface rolling. Surf Coat Technol 2021;426:127772.
19. Chen X, Xie X, Zhang Y, Wang H, Liang Z. Tungsten carbide coating prepared by ultrasonic shot peening to improve the wear properties of magnesium alloys. J Mater Res Technol 2023;26:2451-64.
20. Cui Z, Qin Z, Dong P, Mi Y, Gong D, Li W. Microstructure and corrosion properties of FeCoNiCrMn high entropy alloy coatings prepared by high speed laser cladding and ultrasonic surface mechanical rolling treatment. Mater Lett 2020;259:126769.
21. Lu JZ, Xue KN, Lu HF, Xing F, Luo KY. Laser shock wave-induced wear property improvement and formation mechanism of laser cladding Ni25 coating on H13 tool steel. J Mater Process Tech 2021;296:117202.
22. Li F, Zhang C, Pang Q, Fang G, Xu G. Effect of high-energy shot peening on properties of high-velocity oxygen-fuel spraying. Coatings 2023;13:872.
23. Zhao Y, He Y, Zhang J, Meng C, Zhang X, Zhang S. Effect of high temperature-assisted ultrasonic surface rolling on the friction and wear properties of a plasma sprayed Ni/WC coating on #45 steel substrate. Surf Coat Technol 2023;452:129049.
24. Liu G, Xue W, Cao Y, et al. Influence of laser shock peening on microstructure and property of Ni60 cladding layer and the combined area of 20CrNiMo alloy. J Laser Appl 2023;35:022009.
25. Lin Y, Cai Z, Li Z, et al. Study on the abrasive wear behavior of laser shock peening Ti-6Al-4V titanium alloy under controlled cycling impact. Wear 2019;426-7:112-21.
26. Dong T, Zhou X, Li G, Liu L, Wang R. Microstructure and corrosive wear resistance of plasma sprayed Ni-based coatings after TIG remelting. Mater Res Express 2018;5:026411.
27. Geng Z, Hou S, Shi G, Duan D, Li S. Tribological behaviour at various temperatures of WC-Co coatings prepared using different thermal spraying techniques. Tribol Int 2016;104:36-44.
28. Fang X, Gong J, Yu Y, et al. Study on the fretting wear performance and mechanism of GH4169 superalloy after various laser shock peening treatments. Opt Laser Technol 2024;170:110301.
29. Abeens M, Muruganandhan R, Thirumavalavan K. Effect of Low energy laser shock peening on plastic deformation, wettability and corrosion resistance of aluminum alloy 7075 T651. Optik 2020;219:165045.
30. Trdan U, Porro JA, Ocaña JL, Grum J. Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy. Surf Coat Technol 2012;208:109-16.
31. Praveenkumar K, Swaroop S, Manivasagam G. Effect of multiple laser shock peening without coating on residual stress distribution and high temperature dry sliding wear behaviour of Ti-6Al-4 V alloy. Opt Laser Technol 2023;164:109398.
32. Wang H, Keller S, Chang Y, et al. Effect of laser shock peening without protective coating on the surface mechanical properties of NiTi alloy. J Alloys Compd 2022;896:163011.
33. Petronić S, Čolić K, Đorđević B, Milovanović D, Burzić M, Vučetić F. Effect of laser shock peening with and without protective coating on the microstructure and mechanical properties of Ti-alloy. Opt Laser Eng 2020;129:106052.
34. Yang Y, Zhou W, Guo Y, et al. Effect of laser shock peening without protective coating on surface integrity of titanium-based carbon-fibre/epoxy laminates. Opt Laser Technol 2023;167:109685.
35. Park C, Jung D, Chun E, Ahn S, Jang H, Kim Y. Effect of laser shock peening without coating on fretting corrosion of copper contacts. Appl Surf Sci 2020;514:145917.
36. Sano Y, Akita K, Sano T. A mechanism for inducing compressive residual stresses on a surface by laser peening without coating. Metals 2020;10:816.
38. Xue D, Jiao Y, He W, Shen X, Gao Y, Wang L. Investigations into the improvement of the mechanical properties of Ti-5Al-4Mo-4Cr-2Sn-2Zr titanium alloy by using low energy laser peening without coating. Materials 2020;13:1398.
39. Wang H, Jürgensen J, Decker P, et al. Corrosion behavior of NiTi alloy subjected to femtosecond laser shock peening without protective coating in air environment. Appl Surf Sci 2020;501:144338.
40. Jiao Y, He W, Shen X. Enhanced high cycle fatigue resistance of Ti-17 titanium alloy after multiple laser peening without coating. Int J Adv Manuf Technol 2019;104:1333-43.
41. Troiani E, Zavatta N. The effect of laser peening without coating on the fatigue of a 6082-T6 aluminum alloy with a curved notch. Metals 2019;9:728.
42. Chen Z, Wang Z, Liu J, et al. Enhancing the tribological properties of TA1 pure titanium by modulating the energy of pulsed laser nitriding. Opt Laser Technol 2024;169:110118.
43. Cao Y, Sun J, Ma F, et al. Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel. Tribol Int 2017;115:108-15.
