REFERENCES

1. Frazier WE. Metal additive manufacturing: a review. J Mater Eng Perform 2014;23:1917-28.

2. Gupta N, Weber C, Newsome S. Additive manufacturing: status and opportunities. Available from: https://www.researchgate.net/profile/Justin-Scott-4/publication/312153354_Additive_Manufacturing_Status_and_Opportunities/links/59e786db458515c3630f917b/Additive-Manufacturing-Status-and-Opportunities.pdf [Last accessed on 29 Dec 2022].

3. Liu Z, Jiang Q, Cong W, Li T, Zhang H. Comparative study for environmental performances of traditional manufacturing and directed energy deposition processes. Int J Environ Sci Technol 2018;15:2273-82.

4. Dilberoglu UM, Gharehpapagh B, Yaman U, Dolen M. Current trends and research opportunities in hybrid additive manufacturing. Int J Adv Manuf Technol 2021;113:623-48.

5. Wüst P, Edelmann A, Hellmann R. Areal surface roughness optimization of maraging steel parts produced by hybrid additive manufacturing. Materials 2020;13:418.

6. ASTM. Committee F42 on additive manufacturing technologies. Available from: https://www.astm.org/get-involved/technical-committees/committee-f42 [Last accessed on 29 Dec 2022].

7. Ramiro P, Ortiz M, Alberdi A, Lamikiz A. Characteristics of Fe-based powder coatings fabricated by laser metal deposition with annular and four stream nozzles. Procedia CIRP 2018;74:201-5.

8. Reichardt A, Dillon RP, Borgonia JP, et al. Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing. Mater Des 2016;104:404-13.

9. Kaierle S, Overmeyer L, Alfred I, et al. Single-crystal turbine blade tip repair by laser cladding and remelting. CIRP J Manuf Sci Technol 2017;19:196-9.

10. Flynn JM, Shokrani A, Newman ST, Dhokia V. Hybrid additive and subtractive machine tools - research and industrial developments. Int J Mach Tools Manuf 2016;101:79-101.

11. Wilson JM, Piya C, Shin YC, Zhao F, Ramani K. Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis. J Clean Prod 2014;80:170-8.

12. Boehm V. Hybrid manufacturing of turbine components: laser metal deposition (LMD) and adaptive repair for higher precision and shorter production time. Laser Tech J 2016;13:44-7.

13. Gouveia JR, Pinto SM, Campos S, et al. Life cycle assessment and cost analysis of additive manufacturing repair processes in the mold industry. Sustainability 2022;14:2105.

14. Islam F. Sustainability assessment of direct energy deposition (DED) based hybrid manufacturing using life cycle assessment (LCA) method. Available from: https://researchrepository.wvu.edu/etd/8250 [Last accessed on 29 Dec 2022].

15. Ford S, Despeisse M. Additive manufacturing and sustainability: an exploratory study of the advantages and challenges. J Clean Prod 2016;137:1573-87.

16. Liu W, Deng K, Wei H, Zhao P, Li J, Zhang Y. A decision-making model for comparing the energy demand of additive-subtractive hybrid manufacturing and conventional subtractive manufacturing based on life cycle method. J Clean Prod 2021;311:127795.

17. Paris H, Mokhtarian H, Coatanéa E, Museau M, Ituarte IF. Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Ann 2016;65:29-32.

18. Priarone PC, Lunetto V, Atzeni E, Salmi A. Laser powder bed fusion (L-PBF) additive manufacturing: on the correlation between design choices and process sustainability. Procedia CIRP 2018;78:85-90.

19. Cappucci GM, Pini M, Neri P, Marassi M, Bassoli E, Ferrari AM. Environmental sustainability of orthopedic devices produced with powder bed fusion. J Ind Ecol 2020;24:681-94.

20. Peng T, Wang Y, Zhu Y, Yang Y, Yang Y, Tang R. Life cycle assessment of selective-laser-melting-produced hydraulic valve body with integrated design and manufacturing optimization: a cradle-to-gate study. Addit Manuf 2020;36:101530.

21. Liu Z, Jiang Q, Li T, et al. Environmental benefits of remanufacturing: a case study of cylinder heads remanufactured through laser cladding. J Clean Prod 2016;133:1027-33.

22. Serres N, Tidu D, Sankare S, Hlawka F. Environmental comparison of MESO-CLAD® process and conventional machining implementing life cycle assessment. J Clean Prod 2011;19:1117-24.

23. Morrow W, Qi H, Kim I, Mazumder J, Skerlos S. Environmental aspects of laser-based and conventional tool and die manufacturing. J Clean Prod 2007;15:932-43.

24. Arvanitoyannis IS. ISO 14040: life cycle assessment (LCA)-principles and guidelines. Waste management for the food industries; 2008. pp. 97-132.

25. Liu Z, Li T, Jiang Q, Zhang H. Life cycle assessment-based comparative evaluation of originally manufactured and remanufactured diesel engines: LCA of manufacturing and remanufacturing. J Ind Ecol 2014;18:567-76.

26. Finkbeiner M, Inaba A, Tan R, Christiansen K, Klüppel H. The new international standards for life cycle assessment: ISO 14040 and ISO 14044. Int J Life Cycle Assess 2006;11:80-5.

27. Spatari S, Betz M, Florin H, Baitz M, Faltenbacher M. Using GaBi 3 to perform life cycle assessment and life cycle engineering. Int J Life Cycle Assess 2001:6.

28. National Renewable Energy Laboratory. The U.S. life-cycle inventory database. Available from: https://www.nrel.gov/lci/ [Last accessed on 29 Dec 2022].

29. Lagutkin S, Achelis L, Sheikhaliev S, Uhlenwinkel V, Srivastava V. Atomization process for metal powder. Mater Sci Eng A 2004;383:1-6.

30. Faludi J, Bayley C, Bhogal S, Iribarne M. Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment. Rapid Prototyp J 2015;21:14-33.

31. Rajemi M, Mativenga P, Aramcharoen A. Sustainable machining: selection of optimum turning conditions based on minimum energy considerations. J Clean Prod 2010;18:1059-65.

32. Guinee JB. Handbook on life cycle assessment operational guide to the ISO standards. Int J Life Cycle Assess 2002:7.

33. Sleeswijk AW, van Oers LF, Guinée JB, Struijs J, Huijbregts MA. Normalisation in product life cycle assessment: an LCA of the global and European economic systems in the year 2000. Sci Total Environ 2008;390:227-40.

34. Hauschild M, Wenzel H. Environmental assessment of products. Volume 2: scientific background. Chapman & Hall, UK; 1998.

35. Baumers M, Tuck C, Wildman R, Ashcroft I, Hague R. Energy inputs to additive manufacturing: does capacity utilization matter? In 2011 International Solid Freeform Fabrication Symposium. University of Texas at Austin, 2021.

36. Groen EA, Heijungs R, Bokkers EA, de Boer IJ. Sensitivity analysis in life cycle assessment. Available from: https://www.researchgate.net/profile/Evelyne-Groen/publication/283417261_Sensitivity_analysis_in_life_cycle_assessment/links/5a7da50caca272341aef9542/Sensitivity-analysis-in-life-cycle-assessment.pdf [Last accessed on 29 Dec 2022].