REFERENCES
1. Etacheri, V.; Marom, R.; Elazari, R.; Salitra, G.; Aurbach, D. Challenges in the development of advanced Li-ion batteries: a review. Energy. Environ. Sci. 2011, 4, 3243.
2. Liu, K.; Liu, Y.; Lin, D.; Pei, A.; Cui, Y. Materials for lithium-ion battery safety. Sci. Adv. 2018, 4, eaas9820.
4. Manthiram, A.; Yu, X.; Wang, S. Lithium battery chemistries enabled by solid-state electrolytes. Nat. Rev. Mater. 2017, 2, 16103.
5. Cheng, X. B.; Zhang, R.; Zhao, C. Z.; Zhang, Q. Toward safe lithium metal anode in rechargeable batteries: a review. Chem. Rev. 2017, 117, 10403-73.
6. Xu, W.; Wang, J.; Ding, F.; et al. Lithium metal anodes for rechargeable batteries. Energy. Environ. Sci. 2014, 7, 513-37.
7. Lin, D.; Liu, Y.; Cui, Y. Reviving the lithium metal anode for high-energy batteries. Nat. Nanotechnol. 2017, 12, 194-206.
8. Han, X.; Gong, Y.; Fu, K. K.; et al. Negating interfacial impedance in garnet-based solid-state Li metal batteries. Nat. Mater. 2017, 16, 572-9.
9. Wang, M.; Zhang, H.; Li, Y.; Liu, R.; Yang, H. A three-dimensional co-continuous network structure polymer electrolyte with efficient ion transport channels enabling ultralong-life all solid-state lithium metal batteries. J. Energy. Chem. 2024, 94, 635-45.
10. Wang, C.; Zhang, X.; Sun, X.; Zhang, Y.; Wang, Q.; Sun, J. Aliphatic hyperbranched polycarbonates solid polymer electrolytes with high Li-ion transference number for lithium metal batteries. Macromol. Rapid. Commun. 2024, 45, e2300645.
11. Wang, H.; Wang, Q.; Cao, X.; et al. Thiol-branched solid polymer electrolyte featuring high strength, toughness, and lithium ionic conductivity for lithium-metal batteries. Adv. Mater. 2020, 32, e2001259.
12. Fan, Y.; Zhu, M.; Wang, H.; et al. Polyamine-mediated proton/TFSI- dual capture enables high-voltage PEO-based all-solid-state Li batteries. Adv. Mater. 2026, 38, e20538.
13. Zuo, X.; Cheng, Y.; Xu, L.; et al. A novel thioctic acid-functionalized hybrid network for solid-state batteries. Energy. Storage. Mater. 2022, 46, 570-6.
14. Gong, Y.; Wang, C.; Xin, M.; et al. Ultra-thin and high-voltage-stable Bi-phasic solid polymer electrolytes for high-energy-density Li metal batteries. Nano. Energy. 2024, 119, 109054.
15. Zhang, K.; Wu, F.; Wang, X.; et al. 8.5 µm-thick flexible-rigid hybrid solid-electrolyte/lithium integration for air-stable and interface-compatible all-solid-state lithium metal batteries. Adv. Energy. Mater. 2022, 12, 2200368.
16. Ma, Y.; Wan, J.; Yang, Y.; et al. Scalable, ultrathin, and high-temperature-resistant solid polymer electrolytes for energy-dense lithium metal batteries. Adv. Energy. Mater. 2022, 12, 2103720.
17. Li, J.; Yang, R.; Jiang, A.; et al. Ultra-stable all-solid-state lithium metal batteries facilitated by in-situ LiF-rich single-ion conductor composite polymer electrolytes. Chem. Eng. J. 2025, 514, 162820.
18. Zhang, C.; Zhang, S.; Zhang, Y.; et al. Regulating Lewis acid-base interaction in poly (ethylene oxide)-based electrolyte to enhance the cycling stability of solid-state lithium metal batteries. Small. Struct. 2023, 5, 2300301.
19. Zhang, Q.; Yang, R.; Li, C.; et al. In-situ coupling construction of interface bridge to enhance electrochemical stability of all solid-state lithium metal batteries. J. Energy. Chem. 2024, 89, 18-26.
20. Wei, L.; Xu, X.; Xi, K.; et al. Polydopamine-induced metal-organic framework network-enhanced high-performance composite solid-state electrolytes for dendrite-free lithium metal batteries. ACS. Appl. Mater. Interfaces. 2024, 16, 878-88.
21. Zhang, Q.; Yang, R.; Li, C.; et al. Composite solid electrolytes with cation assisted effect to enhance the electrochemical performance of all solid-state lithium metal batteries. Ceram. Int. 2025, 51, 12738-47.
22. Annu; Arifeen, W. U.; Abideen, Z. U.; Ko, T. J.; Shin, D. K. Evaluation of BaTiO3 enhanced bioinspired modified-chitosan integrated polymer electrolyte membrane for stable Li-metal batteries. J. Energy. Storage. 2026, 141, 119233.
23. Luo, Z.; Cui, Y.; Zhang, Z.; Li, M.; Yu, J. A solid composite electrolyte based on three-dimensional structured zeolite networks for high-performance solid-state lithium metal batteries. Chem. Sci. 2026, 17, 3533-43.
24. Yang, X.; Sun, C.; Li, R.; et al. Percolating dynamic ion-conduction network in composite polymer electrolyte for high-performance lithium metal batteries. Chem. Eng. J. 2025, 520, 165754.
25. Zhou, J.; Wang, X.; Fu, J.; et al. A 3D cross-linked metal-organic framework (MOF)-derived polymer electrolyte for dendrite-free solid-state lithium-ion batteries. Small 2024, 20, e2309317.
26. Wang, Z.; Du, Z.; Liu, Y.; et al. Metal-organic frameworks and their derivatives for optimizing lithium metal anodes. eScience 2024, 4, 100189.
27. Wu, X.; Zhang, W.; Qu, H.; et al. An oriented design of a π-conjugated polymer framework for high-performance solid-state lithium batteries. Energy. Environ. Sci. 2025, 18, 1835-46.
28. Majeed, M. K.; Hussain, A.; Hussain, G.; et al. Interfacial engineering of polymer solid-state lithium battery electrolytes and li-metal anode: current status and future directions. Small 2024, 20, e2406357.
29. Chattopadhyay, J.; Pathak, T. S.; Santos, D. M. F. Applications of polymer electrolytes in lithium-ion batteries: a review. Polymers 2023, 15, 3907.
30. Yang, H.; Wu, N. Ionic conductivity and ion transport mechanisms of solid-state lithium-ion battery electrolytes: a review. Energy. Sci. Eng. 2022, 10, 1643-71.
31. Guchok, O.; Ardel, G.; Keidar, T. D.; et al. Understanding of the ion transport in blended TPU-PEO polymer electrolytes. J. Solid. State. Electrochem. 2025, 6323.
32. Fenton, D.; Parker, J. M.; Wright, P. Complexes of alkali metal ions with poly(ethylene oxide). Polymer 1973, 14, 589.
34. Xue, Z.; He, D.; Xie, X. Poly(ethylene oxide)-based electrolytes for lithium-ion batteries. J. Mater. Chem. A. 2015, 3, 19218-53.
35. Xu, S.; Sun, Z.; Sun, C.; et al. Homogeneous and fast ion conduction of PEO-based solid-state electrolyte at low temperature. Adv. Funct. Mater. 2020, 30, 2007172.
36. Nair, J. R.; Shaji, I.; Ehteshami, N.; et al. Solid polymer electrolytes for lithium metal battery via thermally induced cationic ring-opening polymerization (CROP) with an insight into the reaction mechanism. Chem. Mater. 2019, 31, 3118-33.
37. Cui, Y.; Liang, X.; Chai, J.; et al. High performance solid polymer electrolytes for rechargeable batteries: a self-catalyzed strategy toward facile synthesis. Adv. Sci. 2017, 4, 1700174.
38. Liu, Q.; Cai, B.; Li, S.; et al. Long-cycling and safe lithium metal batteries enabled by the synergetic strategy of ex situ anodic pretreatment and an in-built gel polymer electrolyte. J. Mater. Chem. A. 2020, 8, 7197-204.
39. Zhao, Y.; Tao, R.; Fujinami, T. Enhancement of ionic conductivity of PEO-LiTFSI electrolyte upon incorporation of plasticizing lithium borate. Electrochim. Acta. 2006, 51, 6451-5.
40. Ai, C.; Shu, Y.; Zhao, Z.; Guo, H.; Chen, S.; Yi, Q. Advances in the application of ionic liquids in PEO-based lithium-ion solid-state electrolytes: from the perspective of fillers. J. Mater. Chem. A. 2025, 13, 13632-56.
41. Rawat, S.; Singh, P. K.; Pandey, S. P.; Singh, R. C. Review on comparative study of solid polymer electrolyte polyethylene oxide (PEO) doped with ionic liquid. Macromol. Symp. 2024, 413, 2300050.
42. Cabañero Martínez, M. A.; Boaretto, N.; Naylor, A. J.; et al. Are polymer-based electrolytes ready for high-voltage lithium battery applications? An overview of degradation mechanisms and battery performance. Adv. Energy. Mater. 2022, 12, 2201264.
43. Qiu, J.; Liu, X.; Chen, R.; et al. Enabling stable cycling of 4.2 V high-voltage all-solid-state batteries with PEO-based solid electrolyte. Adv. Funct. Mater. 2020, 30, 1909392.
44. Li, Z.; Zhang, H.; Sun, X.; Yang, Y. Mitigating interfacial instability in polymer electrolyte-based solid-state lithium metal batteries with 4 V cathodes. ACS. Energy. Lett. 2020, 5, 3244-53.
45. Lu, J.; Zhou, J.; Chen, R.; et al. 4.2 V poly(ethylene oxide)-based all-solid-state lithium batteries with superior cycle and safety performance. Energy. Storage. Mater. 2020, 32, 191-8.
46. Nava, D.; Guzmán, G.; Vazquez-arenas, J.; Cardoso, J.; Gomez, B.; Gonzalez, I. An experimental and theoretical correlation to account for the effect of LiPF6 concentration on the ionic conductivity of poly(poly (ethylene glycol) methacrylate). Solid. State. Ionics. 2016, 290, 98-107.
47. Wang, S.; Zhang, L.; Zeng, Q.; Liu, X.; Lai, W.; Zhang, L. Cellulose microcrystals with brush-like architectures as flexible all-solid-state polymer electrolyte for lithium-ion battery. ACS. Sustain. Chem. Eng. 2020, 8, 3200-7.
48. Zhang, S.; Xia, X.; Xie, D.; et al. Facile interfacial modification via in-situ ultraviolet solidified gel polymer electrolyte for high-performance solid-state lithium ion batteries. J. Power. Sources. 2019, 409, 31-7.
49. Yuan, B.; Zhao, B.; Wang, Q.; et al. A thin composite polymer electrolyte with high room-temperature conductivity enables mass production for solid-state lithium-metal batteries. Energy. Storage. Mater. 2022, 47, 288-96.
50. Ma, Q.; Yue, J.; Fan, M.; et al. Formulating the electrolyte towards high-energy and safe rechargeable lithium-metal batteries. Angew. Chem. Int. Ed. Engl. 2021, 60, 16554-60.
51. Zhao, Q.; Liu, X.; Stalin, S.; Khan, K.; Archer, L. A. Solid-state polymer electrolytes with in-built fast interfacial transport for secondary lithium batteries. Nat. Energy. 2019, 4, 365-73.
52. Yang, H.; Jing, M.; Wang, L.; Xu, H.; Yan, X.; He, X. PDOL-based solid electrolyte toward practical application: opportunities and challenges. Nanomicro. Lett. 2024, 16, 127.
53. Li, W.; Gao, J.; Tian, H.; et al. SnF2-catalyzed formation of polymerized dioxolane as solid electrolyte and its thermal decomposition behavior. Angew. Chem. Int. Ed. Engl. 2022, 61, e202114805.
54. Larrabide, A.; Rey, I.; Lizundia, E. Environmental impact assessment of solid polymer electrolytes for solid-state lithium batteries. Adv. Energy. and. Sustain. Res. 2022, 3, 2200079.
55. Mandade, P.; Weil, M.; Baumann, M.; Wei, Z. Environmental life cycle assessment of emerging solid-state batteries: a review. Chem. Eng. J. Adv. 2023, 13, 100439.
56. Klinsmann, M.; Hildebrand, F. E.; Ganser, M.; Mcmeeking, R. M. Dendritic cracking in solid electrolytes driven by lithium insertion. J. Power. Sources. 2019, 442, 227226.
57. Lee, S.; Kim, J.; Lee, J.; Byeon, J. Evaluation of cracking damage in electrode materials of a LMO/Al-Lix lithium-ion battery through analysis of acoustic emission signals. J. Mater. Res. Technol. 2023, 24, 5235-49.
58. Chen, S.; Wei, X.; Zhang, G.; et al. Mechanical strain signal based early warning for failure of different prismatic lithium-ion batteries. J. Power. Sources. 2023, 580, 233397.
59. Mirsakiyeva, A.; Ebadi, M.; Araujo, C. M.; Brandell, D.; Broqvist, P.; Kullgren, J. Initial steps in PEO decomposition on a Li metal electrode. J. Phys. Chem. C. 2019, 123, 22851-7.
60. Ebadi, M.; Marchiori, C.; Mindemark, J.; Brandell, D.; Araujo, C. M. Assessing structure and stability of polymer/lithium-metal interfaces from first-principles calculations. J. Mater. Chem. A. 2019, 7, 8394-404.
61. Ebadi, M.; Costa, L. T.; Araujo, C. M.; Brandell, D. Modelling the polymer electrolyte/Li-metal interface by molecular dynamics simulations. Electrochim. Acta. 2017, 234, 43-51.
62. Zhou, Q.; Ma, J.; Dong, S.; Li, X.; Cui, G. Intermolecular chemistry in solid polymer electrolytes for high-energy-density lithium batteries. Adv. Mater. 2019, 31, e1902029.
63. Fauteux, D. Formation of a passivating film at the lithium-PEO-LiCF3SO3 interface. Solid. State. Ionics. 1985, 17, 133-8.
64. Fauteux, D. Lithium electrode/PEO-based polymer electrolyte interface behavior between 60° and 120 °C. J. Electrochem. Soc. 2019, 135, 2231-7.
65. Croce, F.; Scrosati, B. Interfacial phenomena in polymer-electrolyte cells: lithium passivation and cycleability. J. Power. Sources. 1993, 43, 9-19.
66. Lisowska-oleksiak, A. The interface between lithium and poly(ethylene-oxide). Solid. State. Ionics. 1999, 119, 205-9.
67. Le Granvalet-mancini, M. Characterization of the passivation layer at the polymer electrolyte/lithium electrode interface. Solid. State. Ionics. 2000, 135, 283-90.
68. Kong, F.; Mclarnon, F. Spectroscopic ellipsometry of lithium/polymer electrolyte interfaces. J. Power. Sources. 2000, 89, 180-9.
69. Ushakova, E. E.; Frolov, A.; Reveguk, A. A.; Usachov, D. Y.; Itkis, D. M.; Yashina, L. V. Solid electrolyte interface formation between lithium and PEO-based electrolyte. Appl. Surf. Sci. 2022, 589, 153014.
70. Sheng, O.; Zheng, J.; Ju, Z.; et al. In situ construction of a LiF-enriched interface for stable all-solid-state batteries and its origin revealed by cryo-TEM. Adv. Mater. 2020, 32, e2000223.
71. Shin, H.; Park, J.; Han, S.; Sastry, A. M.; Lu, W. Component-/structure-dependent elasticity of solid electrolyte interphase layer in Li-ion batteries: experimental and computational studies. J. Power. Sources. 2015, 277, 169-79.
72. Wang, C.; Lin, R.; He, Y.; et al. Tension-induced cavitation in Li-metal stripping. Adv. Mater. 2023, 35, e2209091.
73. Ye, H.; Gui, S.; Wang, Z.; et al. In situ measurements of the mechanical properties of electrochemically deposited Li2CO3 and Li2O nanorods. ACS. Appl. Mater. Interfaces. 2021, 13, 44479-87.
74. Pugh, S. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals. London,. Edinburgh,. Dublin. Philos. Mag. J. Sci. 2009, 45, 823-43.
75. Li, J. L.; Wang, Y. N.; Sun, S. Y.; et al. Understanding and regulating the mechanical stability of solid electrolyte interphase in batteries. Adv. Energy. Mater. 2024, 15, 2403845.
76. Li, J.; Hu, H.; Fang, W.; et al. Impact of fluorine-based lithium salts on SEI for all-solid-state PEO-based lithium metal batteries. Adv. Funct. Mater. 2023, 33, 2303718.
77. Zhang, J.; Li, S.; Wang, X.; et al. Construction of stable Li2O-rich solid electrolyte interphase for practical PEO-based Li-metal batteries. Adv. Energy. Mater. 2023, 14, 2302587.
78. Wu, H.; Jia, H.; Wang, C.; Zhang, J. G.; Xu, W. Recent progress in understanding solid electrolyte interphase on lithium metal anodes. Adv. Energy. Mater. 2020, 11, 2003092.
79. Pan, J.; Cheng, Y.; Qi, Y. General method to predict voltage-dependent ionic conduction in a solid electrolyte coating on electrodes. Phys. Rev. B. 2015, 91, 134116.
80. Xu, J.; Li, J.; Li, Y.; et al. Long-life lithium-metal all-solid-state batteries and stable li plating enabled by in situ formation of Li3PS4 in the SEI layer. Adv. Mater. 2022, 34, e2203281.
81. Cheng, Z.; Zhao, W.; Wang, Q.; et al. Beneficial redox activity of halide solid electrolytes empowering high-performance anodes in all-solid-state batteries. Nat. Mater. 2025, 24, 1763-72.
82. Wang, Z. Y.; Zhao, C. Z.; Yao, N.; et al. The regulation of solid electrolyte interphase on composite lithium anodes in solid-state batteries. Angew. Chem. Int. Ed. Engl. 2025, 64, e202414524.
83. Lopez, J.; Sun, Y.; Mackanic, D. G.; et al. A dual-crosslinking design for resilient lithium-ion conductors. Adv. Mater. 2018, 30, e1804142.
84. Guo, Y.; Qu, X.; Hu, Z.; Zhu, J.; Niu, W.; Liu, X. Highly elastic and mechanically robust polymer electrolytes with high ionic conductivity and adhesiveness for high-performance lithium metal batteries. J. Mater. Chem. A. 2021, 9, 13597-607.
85. Ren, Y.; Chen, S.; Odziomek, M.; et al. Mixing functionality in polymer electrolytes: a new horizon for achieving high-performance all-solid-state lithium metal batteries. Angew. Chem. Int. Ed. Engl. 2025, 64, e202422169.
86. Zheng, T.; Cui, X.; Chu, Y.; Li, H.; Pan, Q. Ultrahigh elastic polymer electrolytes for solid-state lithium batteries with robust interfaces. ACS. Appl. Mater. Interfaces. 2022, 14, 5932-9.
87. Lee, M. J.; Han, J.; Lee, K.; et al. Elastomeric electrolytes for high-energy solid-state lithium batteries. Nature 2022, 601, 217-22.
88. Liu, L.; Mo, J.; Li, J.; et al. Comprehensively-modified polymer electrolyte membranes with multifunctional PMIA for highly-stable all-solid-state lithium-ion batteries. J. Energy. Chem. 2020, 48, 334-43.
89. Huang, C.; Zhang, L. Miscibility of poly(vinylidene fluoride) and atactic poly(methyl methacrylate). J. Appl. Polym. Sci. 2004, 92, 1-5.
90. Xiao, Q.; Wang, X.; Li, W.; Li, Z.; Zhang, T.; Zhang, H. Macroporous polymer electrolytes based on PVDF/PEO-b-PMMA block copolymer blends for rechargeable lithium ion battery. J. Membr. Sci. 2009, 334, 117-22.
91. Tang, S.; Lan, Q.; Xu, L.; et al. A novel cross-linked nanocomposite solid-state electrolyte with super flexibility and performance for lithium metal battery. Nano. Energy. 2020, 71, 104600.
92. Zhang, Z. K.; Ding, S. P.; Ye, Z.; Xia, D. L.; Xu, J. T. PEO-based block copolymer electrolytes containing double conductive phases with improved mechanical and electrochemical properties. Mater. 2022, 15, 7930.
93. Duan, S.; Zhang, L.; Zheng, Y.; et al. “Rigid exterior, soft interior” design enables high-voltage polyether electrolytes for quasi-solid-state batteries. Angew. Chem. Int. Ed. Engl. 2025, 64, e202502728.
94. Cui, J.; Du, Y.; Zhao, L.; et al. Thermal stable poly-dioxolane based electrolytes via a robust crosslinked network for dendrite-free solid-state Li-metal batteries. Chem. Eng. J. 2023, 461, 141973.
95. Fu, F.; Lu, W.; Zheng, Y.; et al. Regulating lithium deposition via bifunctional regular-random cross-linking network solid polymer electrolyte for Li metal batteries. J. Power. Sources. 2021, 484, 229186.
96. Liu, S.; Imanishi, N.; Zhang, T.; et al. Effect of nano-silica filler in polymer electrolyte on Li dendrite formation in Li/poly(ethylene oxide)-Li(CF3SO2)2N/Li. J. Power. Sources. 2010, 195, 6847-53.
97. Chung, S.; Wang, Y.; Persi, L.; et al. Enhancement of ion transport in polymer electrolytes by addition of nanoscale inorganic oxides. J. Power. Sources. 2001, 97-98, 644-8.
98. Dam, T.; Tripathy, S. N.; Paluch, M.; Jena, S. S.; Pradhan, D. K. Investigations of relaxation dynamics and observation of nearly constant loss phenomena in PEO20-LiCF3SO3-ZrO2 based polymer nano-composite electrolyte. Electrochim. Acta. 2016, 202, 147-56.
99. Polu, A. R.; Rhee, H. Effect of TiO2 nanoparticles on structural, thermal, mechanical and ionic conductivity studies of PEO12-LiTDI solid polymer electrolyte. J. Ind. Eng. Chem. 2016, 37, 347-53.
100. Chen, L.; Li, Y.; Li, S.; Fan, L.; Nan, C.; Goodenough, J. B. PEO/garnet composite electrolytes for solid-state lithium batteries: from “ceramic-in-polymer” to “polymer-in-ceramic”. Nano. Energy. 2018, 46, 176-84.
101. Lei, R.; Yang, Y.; Yu, C.; Xu, Y.; Li, Y.; Li, J. A facile preparation of PEO-LiClO4-fumed SiO2 composite solid-state electrolyte with improved electrochemical performance for lithium-metal batteries. Sustain. Energy. Fuels. 2021, 5, 1538-47.
102. Li, S.; Wang, Y.; Anguita, J.; Yang, K.; Silva, S. R. P. Constructing vertically aligned Li + transport pathways in a flexible solid polymer composite electrolyte by a soft template approach. Nanoscale 2025, 17, 6833-40.
103. Xu, L.; Xiao, X.; Tu, H.; et al. Engineering functionalized 2D metal-organic frameworks nanosheets with fast Li + conduction for advanced solid Li batteries. Adv. Mater. 2023, 35, e2303193.
104. Wen, J.; Zhang, R.; Zhao, Q.; et al. Hydroxyapatite nanowire-reinforced poly(ethylene oxide)-based polymer solid electrolyte for application in high-temperature lithium batteries. ACS. Appl. Mater. Interfaces. 2020, 12, 54637-43.
105. Yu, J.; Wang, C.; Li, S.; Liu, N.; Zhu, J.; Lu, Z. Li + -containing, continuous silica nanofibers for high Li + conductivity in composite polymer electrolyte. Small 2019, 15, e1902729.
106. Hu, L.; Tang, Z.; Zhang, Z. New composite polymer electrolyte comprising mesoporous lithium aluminate nanosheets and PEO/LiClO4. J. Power. Sources. 2007, 166, 226-32.
107. Meng, X.; Zhang, D.; Mo, J.; et al. Room-temperature solid-state metallic lithium batteries based on high-content boron nitride nanosheet-modified polymer electrolytes. Appl. Surf. Sci. 2024, 648, 158962.
108. Li, R.; Guo, S.; Yu, L.; et al. Morphosynthesis of 3D macroporous garnet frameworks and perfusion of polymer-stabilized lithium salts for flexible solid-state hybrid electrolytes. Adv. Mater. Interfaces. 2019, 6, 1900200.
109. Li, Z.; Sha, W. X.; Guo, X. Three-dimensional garnet framework-reinforced solid composite electrolytes with high lithium-ion conductivity and excellent stability. ACS. Appl. Mater. Interfaces. 2019, 11, 26920-7.
110. Wu, J.; Rao, Z.; Cheng, Z.; Yuan, L.; Li, Z.; Huang, Y. Ultrathin, flexible polymer electrolyte for cost-effective fabrication of all-solid-state lithium metal batteries. Adv. Energy. Mater. 2019, 9, 1902767.
111. Mu, Y.; Yang, L.; Feng, Y.; et al. Achieving superior critical current density and rate performance in solid-state lithium batteries via vertically aligned LATP arrays. Nano. Energy. 2025, 138, 110885.
112. Zhou, K.; Zhang, M.; Zhang, X.; et al. A cellulose reinforced polymer composite electrolyte for the wide-temperature-range solid lithium batteries. Chem. Eng. J. 2023, 464, 142537.
113. Wang, T.; Zhang, M.; Zhou, K.; et al. A hetero-layered, mechanically reinforced, ultra-lightweight composite polymer electrolyte for wide-temperature-range, solid-state sodium batteries. Adv. Funct. Mater. 2023, 33, 2215117.
114. Zhang, Z.; YingHuang; Zhang, G.; Chao, L. Three-dimensional fiber network reinforced polymer electrolyte for dendrite-free all-solid-state lithium metal batteries. Energy. Storage. Mater. 2021, 41, 631-41.
115. Shi, P.; Ma, J.; Huang, Y.; et al. A thin and high-strength composite polymer solid-state electrolyte with a highly efficient and uniform ion-transport network. J. Mater. Chem. A. 2021, 9, 14344-51.
116. Tung, S. O.; Ho, S.; Yang, M.; Zhang, R.; Kotov, N. A. A dendrite-suppressing composite ion conductor from aramid nanofibres. Nat. Commun. 2015, 6, 6152.
117. Liu, Y.; Xu, H.; Wang, T.; Chen, M. PAN@UiO66 nanofibers with fast Li + transfer and outstanding mechanical performance for composite solid polymer electrolytes. ACS. Appl. Energy. Mater. 2025, 8, 3793-801.
118. Cao, Y.; Morrissey, T. G.; Acome, E.; et al. A transparent, self-healing, highly stretchable ionic conductor. Adv. Mater. 2017, 29.
119. Munaoka, T.; Yan, X.; Lopez, J.; et al. Ionically conductive self-healing binder for low cost Si microparticles anodes in Li-ion batteries. Adv. Energy. Mater. 2018, 8, 1703138.
120. Jaumaux, P.; Liu, Q.; Zhou, D.; et al. Deep-eutectic-solvent-based self-healing polymer electrolyte for safe and long-life lithium-metal batteries. Angew. Chem. Int. Ed. Engl. 2020, 59, 9134-42.
121. Cordier, P.; Tournilhac, F.; Soulié-Ziakovic, C.; Leibler, L. Self-healing and thermoreversible rubber from supramolecular assembly. Nature 2008, 451, 977-80.
122. Pei, F.; Wu, L.; Zhang, Y.; et al. Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries. Nat. Commun. 2024, 15, 351.
123. Li, Z.; Fu, J.; Zheng, S.; Li, D.; Guo, X. Self-healing polymer electrolyte for dendrite-free Li metal batteries with ultra-high-voltage Ni-rich layered cathodes. Small 2022, 18, e2200891.
124. Chen, K.; Sun, Y.; Zhang, X.; Liu, J.; Xie, H. A self-healing and nonflammable cross-linked network polymer electrolyte with the combination of hydrogen bonds and dynamic disulfide bonds for lithium metal batteries. Energy. Environ. Mater. 2023, 6, e12568.
125. Zhang, L.; Zhang, P.; Chang, C.; Guo, W.; Guo, Z. H.; Pu, X. Self-healing solid polymer electrolyte for room-temperature solid-state lithium metal batteries. ACS. Appl. Mater. Interfaces. 2021, 13, 46794-802.
126. Li, Z.; Wang, L.; Huang, X.; He, X. Unveiling the mystery of LiF within solid electrolyte interphase in lithium batteries. Small 2024, 20, e2305429.
127. Eshetu, G. G.; Judez, X.; Li, C.; et al. Ultrahigh performance all solid-state lithium sulfur batteries: salt anion’s chemistry-induced anomalous synergistic effect. J. Am. Chem. Soc. 2018, 140, 9921-33.
128. Wang, C.; Wang, T.; Wang, L.; et al. Differentiated lithium salt design for multilayered PEO electrolyte enables a high-voltage solid-state lithium metal battery. Adv. Sci. 2019, 6, 1901036.
129. Zhang, Z.; Wang, J.; Zhang, S.; et al. Stable all-solid-state lithium metal batteries with Li3N-LiF-enriched interface induced by lithium nitrate addition. Energy. Storage. Mater. 2021, 43, 229-37.
130. Li, H.; Liu, W.; Yang, X.; et al. Fluoroethylene carbonate-Li-ion enabling composite solid-state electrolyte and lithium metal interface self-healing for dendrite-free lithium deposition. Chem. Eng. J. 2021, 408, 127254.
131. Li, X.; Liu, Q.; Wang, Y.; et al. In situ polymerized solid-state electrolyte enabling inorganic-organic dual-layered SEI film for stable lithium metal batteries. Small 2025, 21, e2411104.
132. Ionic conductivity and mechanical properties of the solid electrolyte interphase in lithium metal batteries. Energy. Mater. 2023.
133. Hu, L.; Gao, X.; Li, Z.; et al. Layered polymer stacking for stable interfaces and dendrite growth inhibition in all-solid-state lithium batteries. ACS. Appl. Mater. Interfaces. 2023, 15, 38485-95.
134. Fang, R.; Xu, B.; Grundish, N. S.; et al. Li2S6-integrated PEO-based polymer electrolytes for all-solid-state lithium-metal batteries. Angew. Chem. Int. Ed. Engl. 2021, 60, 17701-6.
135. Li, H.; Li, L.; Zheng, J.; et al. Thermal decomposition assisted construction of nano-Li3N sites interface layer enabling homogeneous Li deposition. ChemSusChem 2023, 16, e202202220.
136. Suyama, M.; Yubuchi, S.; Deguchi, M.; Sakuda, A.; Tatsumisago, M.; Hayashi, A. Importance of Li-metal/sulfide electrolyte interphase ionic conductivity in suppressing short-circuiting of all-solid-state Li-metal batteries. J. Electrochem. Soc. 2021, 168, 060542.
137. Wu, N.; Li, Y.; Dolocan, A.; et al. In situ formation of Li3P layer enables fast Li + conduction across Li/solid polymer electrolyte interface. Adv. Funct. Mater. 2020, 30, 2000831.
138. Huggins, R. A. Recent results on lithium ion conductors. In International Symposium on Solid Ionic and Ionic-Electronic Conductors; Elsevier, 1977; pp 773-81.
139. Ding, J.; Mou, J.; Lin, S.; et al. In situ construction of a Li-Ag&LiF interface enables stable cycling of all-solid-state lithium-metal batteries. J. Colloid. Interface. Sci. 2025, 686, 1000-8.
140. Li, H.; Jiu, H.; Zhang, L.; et al. CoF2-modified PEO-LLZTO composite polymer electrolyte to optimize Li + transport pathway. J. Electroanal. Chem. 2025, 984, 119035.
141. Wang, A.; Yi, M.; Chang, S.; et al. Regulating Li deposition behavior at anodic interface induced by SbF3 electrolyte additive in all-solid-state Li metal batteries. Chem. Eng. J. 2023, 474, 145593.
142. Zhang, X.; Zhang, H.; Geng, Y.; et al. A multifunctional nano filler for solid polymer electrolyte toward stable cycling for lithium-metal anodes in lithium-sulfur batteries. Chem. Eng. J. 2022, 444, 136328.
143. Wu, K.; Li, A.; Tan, J.; et al. SnF2-catalyzed lithiophilic-lithiophobic gradient interface for high-rate PEO-based all-solid-state batteries. Angew. Chem. Int. Ed. Engl. 2024, 63, e202410347.
144. Chen, X.; Chu, F.; Li, D.; Si, M.; Liu, M.; Wu, F. In situ polymerized fluorine-free ether gel polymer electrolyte with stable interface for high-voltage lithium metal batteries. Adv. Funct. Mater. 2024, 35, 2421965.
145. Lu, B.; Hu, L.; Zhang, W.; et al. Li-Ga alloy-contained hybrid solid electrolyte interphase induced by in situ polymerization for high-performance lithium metal batteries. ACS. Appl. Mater. Interfaces. 2024, 16, 55314-24.
146. Xu, L.; Li, J.; Xiang, Y.; et al. Few-layer bismuthene enabled solid-state Li batteries. Energy. Storage. Mater. 2022, 52, 655-63.
147. Zeng, Z.; Liu, G.; Jiang, Z.; Peng, L.; Xie, J. Zinc bis(2-ethylhexanoate), a homogeneous and bifunctional additive, to improve conductivity and lithium deposition for poly (ethylene oxide) based all-solid-state lithium metal battery. J. Power. Sources. 2020, 451, 227730.
148. Ou, C.; Ye, S.; Li, Z.; et al. The intermolecular interaction enables ordered ion transport in quasi-solid-state electrolyte for ultra-long life lithium-metal battery. Energy. Storage. Mater. 2024, 67, 103277.
149. Liu, J.; Mao, R.; Wang, T.; Liu, X.; Qu, Y.; Zhang, B. In situ construction of rich-LiF/LiBr SEI by ion-supported porous polymer strategy for high interfacial stability all-solid-state lithium metal batteries. Adv. Funct. Mater. 2025, 36, e23301.
150. Liang, W.; Zhou, X.; Zhang, B.; et al. The versatile establishment of charge storage in polymer solid electrolyte with enhanced charge transfer for LiF-rich SEI generation in lithium metal batteries. Angew. Chem. Int. Ed. Engl. 2024, 63, e202320149.
151. Li, J.; Cai, Y.; Zhang, F.; et al. Exceptional interfacial conduction and LiF interphase for ultralong life PEO-based all-solid-state batteries. Nano. Energy. 2023, 118, 108985.
152. Mu, Y.; Chu, Y.; Shi, Y.; et al. Constructing robust LiF-enriched interfaces in high-voltage solid-state lithium batteries utilizing tailored oriented ceramic fiber electrolytes. Adv. Energy. Mater. 2024, 14, 2400725.
153. Zheng, Y.; Yang, N.; Duan, S.; et al. Dual-enhanced charge transfer through prelithiation strategy in polymer electrolyte enables robust LiF-rich SEI for ultralong-life all-solid-state batteries. Adv. Funct. Mater. 2025, 36, e11011.
154. Zhang, X.; Jia, M.; Zhang, Q.; et al. LiNO3 and TMP enabled high voltage room-temperature solid-state lithium metal battery. Chem. Eng. J. 2022, 448, 137743.
155. Liu, H.; Liu, X.; Zhang, N.; et al. Functional ternary salt construction enabling an in-situ Li3N/LiF-enriched interface for ultra-stable all-solid-state lithium metal batteries. J. Energy. Chem. 2025, 101, 68-75.
156. Su, Y.; Zhang, X.; Du, C.; et al. An all-solid-state battery based on sulfide and PEO composite electrolyte. Small 2022, 18, e2202069.
157. Chen, X.; Wang, Z.; Si, M.; et al. Reinforced anti-oxidative degradation and interface stabilization in bimetal oxide filler-based PEO electrolytes for lithium metal batteries. Adv. Funct. Mater. 2025, 35, 2504306.
158. Zhao, Z.; Joe, H. J.; Desalegn, B. Z.; Kim, S. K.; Wang, D.; Seo, J. G. Homogeneous Li flux and mechanical stable solid-electrolyte interphase enabled by different solvation chemistry for lithium metal batteries. Adv. Funct. Mater. 2025, 35, e08653.
159. Fan, Z.; Ding, B.; Zhang, T. Solid/solid interfacial architecturing of solid polymer electrolyte-based all-solid-state lithium-sulfur batteries by atomic layer deposition. Small 2019, 15, e1903952.
160. Shi, Y.; Fan, Z.; Ding, B.; et al. Atomic-scale Al2O3 modified PEO-based composite polymer electrolyte for durable solid-state Li-S batteries. J. Electroanal. Chem. 2021, 881, 114916.
161. Wang, L.; Zhang, L.; Wang, Q.; et al. Long lifespan lithium metal anodes enabled by Al2O3 sputter coating. Energy. Storage. Mater. 2018, 10, 16-23.
162. Yan, M.; Liang, J. Y.; Zuo, T. T.; et al. Stabilizing polymer-lithium interface in a rechargeable solid battery. Adv. Funct. Mater. 2019, 30, 1908047.
163. Deng, J.; Wang, Y.; Qu, S.; et al. Fast Li + transport of Li-Zn alloy protective layer enabling excellent electrochemical performance of Li metal anode. Batteries. Supercaps. 2020, 4, 140-5.
164. Zhang, Y.; Wang, H.; Yang, Y.; et al. Polyacrylonitrile fibers network reinforced polymer electrolyte with Li-Sn alloy layer protected Li anode toward ultra-long cycle lifespan for room-temperature solid-state batteries. Chem. Eng. J. 2023, 461, 141993.
165. Liu, Y.; Yang, T.; Fang, R.; et al. Ultra-homogeneous dense Ag nano layer enables long lifespan solid-state lithium metal batteries. J. Energy. Chem. 2024, 96, 110-9.
166. Zhang, S.; Sun, Q.; Hou, G.; et al. Boosting fast interfacial Li + transport in solid-state Li metal batteries via ultrathin Al buffer layer. Nano. Res. 2022, 16, 6825-32.
167. Liu, M.; Wang, C.; Cheng, Z.; et al. Controlling the lithium-metal growth to enable low-lithium-metal-excess all-solid-state lithium-metal batteries. ACS. Mater. Lett. 2020, 2, 665-70.
168. Wang, A.; Li, J.; Yi, M.; et al. Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer. Energy. Storage. Mater. 2022, 49, 246-54.
169. Yang, H.; Zhang, Y.; Tennenbaum, M. J.; et al. Polypropylene carbonate-based adaptive buffer layer for stable interfaces of solid polymer lithium metal batteries. ACS. Appl. Mater. Interfaces. 2019, 11, 27906-12.
170. Liu, J.; Qian, T.; Wang, M.; Zhou, J.; Xu, N.; Yan, C. Use of tween polymer to enhance the compatibility of the Li/electrolyte interface for the high-performance and high-safety quasi-solid-state lithium-sulfur battery. Nano. Lett. 2018, 18, 4598-605.
171. Wang, Z.; Tan, J.; Cui, J.; et al. A novel asymmetrical multilayered composite electrolyte for high-performance ambient-temperature all-solid-state lithium batteries. J. Mater. Chem. A. 2024, 12, 4231-9.
172. Ye, Q.; Liang, H.; Wang, S.; et al. Fabricating a PVDF skin for PEO-based SPE to stabilize the interface both at cathode and anode for Li-ion batteries. J. Energy. Chem. 2022, 70, 356-62.
173. Chai, Y.; Ning, D.; Zhou, D.; et al. Construction of flexible asymmetric composite polymer electrolytes for high-voltage lithium metal batteries with superior performance. Nano. Energy. 2024, 130, 110160.
174. Pan, J.; Zhang, Y.; Wang, J.; et al. A quasi-double-layer solid electrolyte with adjustable interphases enabling high-voltage solid-state batteries. Adv. Mater. 2022, 34, e2107183.
175. Wang, J.; Zhang, Z.; Ying, H.; et al. An effective artificial layer boosting high-performance all-solid-state lithium batteries with high coulombic efficiency. J. Materiomics. 2022, 8, 257-65.
176. Wang, J.; Zhang, Z.; Ying, H.; Han, G.; Han, W. In-situ formation of LiF-rich composite interlayer for dendrite-free all-solid-state lithium batteries. Chem. Eng. J. 2021, 411, 128534.
177. Chen, L.; Li, W.; Fan, L. Z.; Nan, C. W.; Zhang, Q. Intercalated electrolyte with high transference number for dendrite-free solid-state lithium batteries. Adv. Funct. Mater. 2019, 29, 1901047.
178. Ye, Y.; Deng, Z.; Gao, L.; et al. Lithium-rich anti-perovskite Li2OHBr-based polymer electrolytes enabling an improved interfacial stability with a three-dimensional-structured lithium metal anode in all-solid-state batteries. ACS. Appl. Mater. Interfaces. 2021, 13, 28108-17.
179. Zhu, Y.; Han, Y.; Guo, Q.; et al. Lithium- gel polymer electrolyte composite anode with large electrolyte-lithium interface for solid-state battery. Electrochim. Acta. 2021, 394, 139123.
180. Liu, Y.; Lin, D.; Jin, Y.; et al. Transforming from planar to three-dimensional lithium with flowable interphase for solid lithium metal batteries. Sci. Adv. 2017, 3, eaao0713.
181. Zhu, J.; Cai, D.; Li, J.; et al. In-situ generated Li3N/Li-Al alloy in reduced graphene oxide framework optimizing ultra-thin lithium metal electrode for solid-state batteries. Energy. Storage. Mater. 2022, 49, 546-54.
182. Park, B.; Oh, C.; Yu, S.; et al. Coupling of 3D porous hosts for Li metal battery anodes with viscous polymer electrolytes. J. Electrochem. Soc. 2022, 169, 010511.
183. Liu, Z.; Fu, X.; Li, Z.; et al. Integrated anode with 3D electron/ion conductive network for stable lithium metal batteries. Energy. Storage. Mater. 2024, 66, 103201.
184. Pan, H.; Zhang, M.; Cheng, Z.; et al. Carbon-free and binder-free Li-Al alloy anode enabling an all-solid-state Li-S battery with high energy and stability. Sci. Adv. 2022, 8, eabn4372.
185. Kim, M.; Kim, M. J.; Oh, Y. S.; Kang, S.; Shin, T. H.; Lim, H. T. Design strategies of Li-Si alloy anode for mitigating chemo-mechanical degradation in sulfide-based all-solid-state batteries. Adv. Sci. 2023, 10, e2301381.
186. Abraham, K. Recent developments in secondary lithium battery technology. J. Power. Sources. 1985, 14, 179-91.
187. Huggins, R. Alternative materials for negative electrodes in lithium systems. Solid. State. Ionics. 2002, 152-153, 61-8.
188. Lee, J.; Jeong, S. H.; Nam, J. S.; et al. Toward thin and stable anodes for practical lithium metal batteries: A review, strategies, and perspectives. EcoMat 2023, 5, e12416.
189. Bang, H. J.; Kim, S.; Prakash, J. Electrochemical investigations of lithium-aluminum alloy anode in Li/polymer cells. J. Power. Sources. 2001, 92, 45-9.
190. Zhang, Y.; Chen, R.; Wang, S.; et al. Free-standing sulfide/polymer composite solid electrolyte membranes with high conductance for all-solid-state lithium batteries. Energy. Storage. Mater. 2020, 25, 145-53.
191. Hänsel, C.; Singh, B.; Kiwic, D.; Canepa, P.; Kundu, D. Favorable interfacial chemomechanics enables stable cycling of high-Li-content Li-In/Sn anodes in sulfide electrolyte-based solid-state batteries. Chem. Mater. 2021, 33, 6029-40.
192. Yan, W.; Mu, Z.; Wang, Z.; et al. Hard-carbon-stabilized Li-Si anodes for high-performance all-solid-state Li-ion batteries. Nat. Energy. 2023, 8, 800-13.
193. Huang, Y.; Shao, B.; Han, F. Li alloy anodes for high-rate and high-areal-capacity solid-state batteries. J. Mater. Chem. A. 2022, 10, 12350-8.
194. Chen, L.; Venkatram, S.; Kim, C.; Batra, R.; Chandrasekaran, A.; Ramprasad, R. Electrochemical stability window of polymeric electrolytes. Chem. Mater. 2019, 31, 4598-604.
195. Pandian, S.; Adiga, S.; Tagade, P.; Hariharan, K.; Mayya, K.; Lee, Y. Electrochemical stability of ether based salt-in-polymer based electrolytes: computational investigation of the effect of substitution and the type of salt. J. Power. Sources. 2018, 393, 204-10.
196. Dai, Y.; Hou, Z.; Luo, G.; et al. Improving the interfacial stability of ultrahigh-nickel cathodes with PEO-based electrolytes by targeted chemical reactions. Chem. Sci. 2024, 15, 12964-72.
197. Chen, X.; Li, Y.; Lu, Y.; et al. LATP-coated LiNi0.8Co0.1Mn0.1O2 cathode with compatible interface with ultrathin PVDF-reinforced PEO-LLZTO electrolyte for stable solid-state lithium batteries. J. Materiomics. 2024, 10, 682-93.
198. Li, Q.; Zhang, X.; Peng, J.; et al. Engineering a high-voltage durable cathode/electrolyte interface for all-solid-state lithium metal batteries via in situ electropolymerization. ACS. Appl. Mater. Interfaces. 2022, 14, 21018-27.
199. Cheng, Z.; Xiang, J.; Yuan, L.; et al. Multifunctional additive enables a “5H” PEO solid electrolyte for high-performance lithium metal batteries. ACS. Appl. Mater. Interfaces. 2024, 16, 21924-31.
200. Kim, S. H.; Park, N.; Bo Lee, W.; Park, J. H. Functional sulfate additive-derived interfacial layer for enhanced electrochemical stability of PEO-based polymer electrolytes. Small 2024, 20, e2309160.
201. Ye, M.; Chen, J.; Deng, H.; et al. In-situ electrochemical passivation for constructing high-voltage PEO-based solid-state lithium battery. Chem. Eng. J. 2024, 488, 151108.
202. Arrese-igor, M.; Martinez-ibañez, M.; Pavlenko, E.; et al. Toward high-voltage solid-state Li-metal batteries with double-layer polymer electrolytes. ACS. Energy. Lett. 2022, 7, 1473-80.
203. Schreiber, A.; Rosen, M.; Waetzig, K.; et al. Oxide ceramic electrolytes for all-solid-state lithium batteries - cost-cutting cell design and environmental impact. Green. Chem. 2023, 25, 399-414.
204. Wu, Y.; Zhang, Z.; Zhang, Q.; et al. Industrialization challenges for sulfide-based all solid state battery. eTransportation 2024, 22, 100371.
205. Kong, W.; Jiang, Z.; Liu, Y.; et al. Stabilizing Li1.3Al0.3Ti1.7(PO4)3|Li metal anode interface in solid-state batteries by Kevlar aramid nanofiber-based protective coating. Adv. Funct. Mater. 2023, 33, 2306748.
206. Wang, S.; Lou, C.; Wu, X.; et al. Large-scale manufacturing sulfide superionic conductor for advancing all-solid-state batteries. Matter 2025, 8, 102135.
207. Lee, W.; Lee, J.; Yu, T.; et al. Advanced parametrization for the production of high-energy solid-state lithium pouch cells containing polymer electrolytes. Nat. Commun. 2024, 15, 5860.
208. Song, Z.; Chen, F.; Martinez-Ibañez, M.; et al. A reflection on polymer electrolytes for solid-state lithium metal batteries. Nat. Commun. 2023, 14, 4884.
209. Cywar, R. M.; Rorrer, N. A.; Hoyt, C. B.; Beckham, G. T.; Chen, E. Y. Bio-based polymers with performance-advantaged properties. Nat. Rev. Mater. 2021, 7, 83-103.
210. Kim, J.; Sun, J.; Kim, J.; et al. Machine learning-driven discovery of innovative hybrid solid electrolytes for high-performance all-solid-state batteries. Chem. Eng. J. 2025, 511, 161926.
