REFERENCES
1. Wang, C. Y.; Liu, T.; Yang, X. G.; et al. Fast charging of energy-dense lithium-ion batteries. Nature 2022, 611, 485-90.
2. Ye, L.; Lu, Y.; Wang, Y.; Li, J.; Li, X. Fast cycling of lithium metal in solid-state batteries by constriction-susceptible anode materials. Nat. Mater. 2024, 23, 244-51.
3. Kim, Y. H.; An, J. H.; Kim, S. Y.; et al. Enabling 100C fast-charging bulk Bi anodes for Na-Ion batteries. Adv. Mater. 2022, 34, e2201446.
4. Li, Y.; Vasileiadis, A.; Zhou, Q.; et al. Origin of fast charging in hard carbon anodes. Nat. Energy. 2024, 9, 134-42.
5. Luo, F.; Roy, A.; Silvioli, L.; et al. P-block single-metal-site tin/nitrogen-doped carbon fuel cell cathode catalyst for oxygen reduction reaction. Nat. Mater. 2020, 19, 1215-23.
6. Ge, J.; Fan, L.; Rao, A. M.; Zhou, J.; Lu, B. Surface-substituted Prussian blue analogue cathode for sustainable potassium-ion batteries. Nat. Sustain. 2022, 5, 225-34.
7. Lv, Z.; Zhao, C.; Xie, M.; et al. 1D insertion chains induced small-polaron collapse in MoS2 2D layers toward fast-charging sodium-ion batteries. Adv. Mater. 2024, 36, e2309637.
8. Sun, H.; Mei, L.; Liang, J.; et al. Three-dimensional holey-graphene/niobia composite architectures for ultrahigh-rate energy storage. Science 2017, 356, 599-604.
9. Choi, J. H.; Kim, D. W.; Jung, D. H.; Kim, K.; Kim, J.; Kang, J. K. Low-crystallinity conductive multivalence iron sulfide-embedded S-doped anode and high-surface area O-doped cathode of 3D porous N-rich graphitic carbon frameworks for high-performance sodium-ion hybrid energy storages. Energy. Storage. Materials. 2024, 68, 103368.
10. Vaalma, C.; Buchholz, D.; Weil, M.; Passerini, S. A cost and resource analysis of sodium-ion batteries. Nat. Rev. Mater. 2018, 3, 18013.
11. Fang, Y.; Luan, D.; Lou, X. W. D. Recent advances on mixed metal sulfides for advanced sodium-ion batteries. Adv. Mater. 2020, 32, e2002976.
12. Wan, Y.; Huang, B.; Liu, W.; Chao, D.; Wang, Y.; Li, W. Fast-charging anode materials for sodium-ion batteries. Adv. Mater. 2024, 36, e2404574.
13. Zhou, X.; Chen, X.; Kuang, W.; et al. Entropy-assisted anion-reinforced solvation structure for fast-charging sodium-ion full batteries. Angew. Chem. Int. Ed. Engl. 2024, 63, e202410494.
14. Wu, L.; Zheng, J.; Wang, L.; et al. PPy-encapsulated SnS2 nanosheets stabilized by defects on a TiO2 support as a durable anode material for lithium-ion batteries. Angew. Chem. Int. Ed. Engl. 2019, 58, 811-5.
15. Li, X.; Zhang, X.; Niu, X.; et al. Strain retarding in multilayered hierarchical Sn‐doped Sb nanoarray for durable sodium storage. Adv. Funct. Mater. 2023, 33, 2300914.
16. Song, K.; Wang, X.; Xie, Z.; et al. Ultrathin CuF2 ‐rich solid‐electrolyte interphase induced by cation‐tailored double electrical layer toward durable sodium storage. Angewandte. Chemie. 2023, 135, e202216450.
17. Yang, M.; Chang, X.; Wang, L.; et al. Interface modulation of metal sulfide anodes for long-cycle-life sodium-ion batteries. Adv. Mater. 2023, 35, e2208705.
18. Li, Y.; Zhou, Q.; Weng, S.; et al. Interfacial engineering to achieve an energy density of over 200 Wh kg-1 in sodium batteries. Nat. Energy. 2022, 7, 511-9.
19. Pei, F.; Wu, L.; Zhang, Y.; et al. Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries. Nat. Commun. 2024, 15, 351.
20. Tu, Z.; Choudhury, S.; Zachman, M. J.; et al. Designing artificial solid-electrolyte interphases for single-ion and high-efficiency transport in batteries. Joule 2017, 1, 394-406.
21. Ou, X.; Cao, L.; Liang, X.; et al. Fabrication of SnS2/Mn2SnS4/carbon heterostructures for sodium-ion batteries with high initial coulombic efficiency and cycling stability. ACS. Nano. 2019, 13, 3666-76.
22. Hu, R.; Ouyang, Y.; Liang, T.; et al. Inhibiting grain coarsening and inducing oxygen vacancies: the roles of Mn in achieving a highly reversible conversion reaction and a long life SnO2-Mn-graphite ternary anode. Energy. Environ. Sci. 2017, 10, 2017-29.
23. Wang, C.; He, Q.; Halim, U.; et al. Monolayer atomic crystal molecular superlattices. Nature 2018, 555, 231-6.
24. Klein, F.; Pinedo, R.; Berkes, B. B.; Janek, J.; Adelhelm, P. Kinetics and degradation processes of CuO as conversion electrode for sodium-ion batteries: an electrochemical study combined with pressure monitoring and DEMS. J. Phys. Chem. C. 2017, 121, 8679-91.
25. Wang, J. W.; Liu, X. H.; Mao, S. X.; Huang, J. Y. Microstructural evolution of tin nanoparticles during in situ sodium insertion and extraction. Nano. Lett. 2012, 12, 5897-902.
26. Han, W.; Huang, P.; Li, L.; et al. Two-dimensional inorganic molecular crystals. Nat. Commun. 2019, 10, 4728.
27. Huang, J.; Guo, X.; Du, X.; et al. Nanostructures of solid electrolyte interphases and their consequences for microsized Sn anodes in sodium ion batteries. Energy. Environ. Sci. 2019, 12, 1550-7.
28. Zhang, Y. Y.; Zhang, C. H.; Guo, Y. J.; et al. Refined electrolyte and interfacial chemistry toward realization of high-energy anode-free rechargeable sodium batteries. J. Am. Chem. Soc. 2023, 145, 25643-52.
29. Liu, J.; Xie, D.; Xu, X.; et al. Reversible formation of coordination bonds in Sn-based metal-organic frameworks for high-performance lithium storage. Nat. Commun. 2021, 12, 3131.
30. Liu, Q.; Jiang, W.; Xu, J.; et al. A fluorinated cation introduces new interphasial chemistries to enable high-voltage lithium metal batteries. Nat. Commun. 2023, 14, 3678.
31. Xu, J.; Zhang, J.; Pollard, T. P.; et al. Electrolyte design for Li-ion batteries under extreme operating conditions. Nature 2023, 614, 694-700.
32. Luo, J.; Yang, M.; Wang, D.; et al. A fast na-ion conduction polymer electrolyte via triangular synergy strategy for quasi-solid-state batteries. Angew. Chem. Int. Ed. Engl. 2023, 62, e202315076.
33. Deng, T.; Cao, L.; He, X.; et al. In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries. Chem 2021, 7, 3052-68.
34. Li, W.; Guo, X.; Song, K.; et al. Binder‐induced ultrathin SEI for defect‐passivated hard carbon enables highly reversible sodium‐ion storage. Adv. Energy. Mater. 2023, 13, 2300648.
35. Song, W.; Scholtis, E. S.; Sherrell, P. C.; et al. Electronic structure influences on the formation of the solid electrolyte interphase. Energy. Environ. Sci. 2020, 13, 4977-89.
36. Chao, D.; Zhu, C.; Yang, P.; et al. Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance. Nat. Commun. 2016, 7, 12122.
37. Cha, E.; Patel, M. D.; Park, J.; et al. 2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li-S batteries. Nat. Nanotechnol. 2018, 13, 337-44.
38. Liang, H. J.; Liu, H. H.; Zhao, X. X.; et al. Electrolyte chemistry toward ultrawide-temperature (-25 to 75 °C) sodium-ion batteries achieved by phosphorus/silicon-synergistic interphase manipulation. J. Am. Chem. Soc. 2024, 146, 7295-304.
39. Wang, X.; He, Y.; Liu, S.; et al. Dynamic concentration of alloying element on anode surface enabling cycle‐stable Li metal batteries. Adv. Funct. Mater. 2023, 33, 2307281.
40. Manzeli, S.; Ovchinnikov, D.; Pasquier, D.; Yazyev, O. V.; Kis, A. 2D transition metal dichalcogenides. Nat. Rev. Mater. 2017, 2, 17033.
41. Wang, D.; Zhou, C.; Filatov, A. S.; et al. Direct synthesis and chemical vapor deposition of 2D carbide and nitride MXenes. Science 2023, 379, 1242-7.
42. Gao, Y. J.; Cui, C. H.; Huang, Z. K.; et al. Lithium pre-storage enables high initial coulombic efficiency and stable lithium-enriched silicon/graphite anode. Angew. Chem. Int. Ed. Engl. 2024, 63, e202404637.
43. Xiong, P.; Zhang, F.; Zhang, X.; et al. Strain engineering of two-dimensional multilayered heterostructures for beyond-lithium-based rechargeable batteries. Nat. Commun. 2020, 11, 3297.
44. Zhang, D.; Zhu, Y.; Liu, L.; et al. Atomic-resolution transmission electron microscopy of electron beam-sensitive crystalline materials. Science 2018, 359, 675-9.
45. Wan, Y.; Song, K.; Chen, W.; et al. Ultra-high initial coulombic efficiency induced by interface engineering enables rapid, stable sodium storage. Angew. Chem. Int. Ed. Engl. 2021, 60, 11481-6.
46. Novoselov, K. S.; Mishchenko, A.; Carvalho, A.; Castro, N. A. H. 2D materials and van der Waals heterostructures. Science 2016, 353, aac9439.
47. Lu, Z.; Yang, H.; Guo, Y.; et al. Consummating ion desolvation in hard carbon anodes for reversible sodium storage. Nat. Commun. 2024, 15, 3497.
48. Wang, Q.; Wang, C.; Qiao, Y.; Zhou, H.; Yu, J. Hybrid-electrolytes system established by dual super-lyophobic membrane enabling high-voltage aqueous lithium metal batteries. Adv. Mater. 2024, 36, e2401486.
49. Zhang, J.; Yan, Y.; Wang, X.; et al. Bridging multiscale interfaces for developing ionically conductive high-voltage iron sulfate-containing sodium-based battery positive electrodes. Nat. Commun. 2023, 14, 3701.
50. Guo, X.; Xie, Z.; Wang, R.; et al. Interface-compatible gel-polymer electrolyte enabled by NaF-solubility-regulation toward all-climate solid-state sodium batteries. Angew. Chem. Int. Ed. Engl. 2024, 63, e202402245.
51. Wang, J.; Yang, Y.; Chen, J.; et al. Spatial confinement of Co1.67Te2 nanoparticles within porous carbon nanofibers enabling fast kinetics and stability for sodium dual-ion batteries. Energy. Storage. Materials. 2024, 71, 103578.
52. Chong; P. et al. Three-dimensional structure S-SnS2/NSG with sulfur vacancies for high-performance lithium-ion batteries. J. Alloys. Compd. 2023, 939, 168828.
